Επεξεργασία

Κοινή χρήση μέσω

Windows Installer Error Messages (for Developers)

  • Άρθρο

This article is intended for software developers who are using Windows Installer to build installer packages for their applications.

Note

If you need support for a Microsoft product, please go to our technical support site at support.microsoft.com.

The error codes detailed in this topic are returned by the Windows Installer, and have error codes of 1000 or greater. The error codes numbered 1000 to 1999 are ship errors and must be authored into the Error table. The error codes numbered greater than 2000 are internal errors and do not have authored strings, but these can occur if the installation package has been incorrectly authored. For error codes specific to the Windows Installer functions MsiExec.exe and InstMsi.exe, see MsiExec.exe and InstMsi.exe Error Messages. For a list of reserved error codes, see Error table. You can search the Internet or the Microsoft support site for solutions to many of the messages in the following table.

Developers of installation packages can also test the internal consistency of their packages by using Internal Consistency Evaluators. For more information, see Internal Consistency Evaluators - ICEs.

Message Code Message Remarks
1101
 Could not open file stream: [2]. System error: [3]
1301
 Cannot create the file '[2]'. A directory with this name already exists.
1302
 Please insert the disk: [2]
1303
 The Installer has insufficient privileges to access this directory: [2].
1304
 Error writing to File: [2]
1305
 Error reading from File: [2]; System error code: [3]
1306
 The file '[2]' is in use. If you can, please close the application that is using the file, then click Retry.
 A system restart may be required because a file being updated is also currently in use. For more information, see System Reboots.
1307
 There is not enough disk space remaining to install this file: [2]. If you can, free up some disk space, and click Retry, or click Cancel to exit.
1308
 Source file not found: [2]
1309
 Error attempting to open the source file: [3]. System error code: [2]
1310
 Error attempting to create the destination file: [3]. System error code: [2]
1311
 Could not locate source file cabinet: [2].
1312
 Cannot create the directory '[2]'. A file with this name already exists. Please rename or remove the file and click Retry, or click Cancel to exit.
1313
 The volume [2] is currently unavailable. Please select another.
1314
 The specified path '[2]' is unavailable.
1315
 Unable to write to the specified folder: [2].
1316
 A network error occurred while attempting to read from the file: [2]
1317
 An error occurred while attempting to create the directory: [2]
1318
 A network error occurred while attempting to create the directory: [2]
1319
 A network error occurred while attempting to open the source file cabinet: [2].
1320
 The specified path is too long: '[2]'
1321
 The Installer has insufficient privileges to modify this file: [2].
1322
 A portion of the folder path '[2]' is invalid. It is either empty or exceeds the length allowed by the system.
1323
 The folder path '[2]' contains words that are not valid in folder paths.
1324
 The folder path '[2]' contains an invalid character.
1325
 '[2]' is not a valid short file name.
1326
 Error getting file security: [3] GetLastError: [2]
1327
 Invalid Drive: [2]
1328
 Error applying patch to file [2]. It has probably been updated by other means, and can no longer be modified by this patch. For more information, contact your patch vendor. System Error: [3]
1329
 A file that is required cannot be installed because the cabinet file [2] is not digitally signed. This may indicate that the cabinet file is corrupt.
1330
 A file that is required cannot be installed because the cabinet file [2] has an invalid digital signature. This may indicate that the cabinet file is corrupt.{ Error [3] was returned by WinVerifyTrust.}
1331
 Failed to correctly copy [2] file: CRC error.
1332
 Failed to correctly move [2] file: CRC error.
1333
 Failed to correctly patch [2] file: CRC error.
1334
 The file '[2]' cannot be installed because the file cannot be found in cabinet file '[3]'. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
1335
 The cabinet file '[2]' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
1336
 There was an error creating a temporary file that is needed to complete this installation. Folder: [3]. System error code: [2]
1401
 Could not create key: [2]. System error [3].
1402
 Could not open key: [2]. System error [3].
1403
 Could not delete value [2] from key [3]. System error [4].
1404
 Could not delete key [2]. System error [3].
1405
 Could not read value [2] from key [3]. System error [4].
1406
 Could not write value [2] to key [3]. System error [4].
1407
 Could not get value names for key [2]. System error [3].
1408
 Could not get sub key names for key [2]. System error [3].
1409
 Could not read security information for key [2]. System error [3].
1410
 Could not increase the available registry space. [2] KB of free registry space is required for the installation of this application.
1500
 Another installation is in progress. You must complete that installation before continuing this one.
 Test packages in high-traffic environments where users request the installation of many applications. For more information, see _MSIExecute Mutex.
1501
 Error accessing secured data. Please make sure the Windows Installer is configured properly and try the install again.
1502
 User '[2]' has previously initiated an install for product '[3]'. That user will need to run that install again before they can use that product. Your current install will now continue.
 Test packages in high-traffic environments where users request the installation of many applications. For more information, see _MSIExecute Mutex.
1503
 User '[2]' has previously initiated an install for product '[3]'. That user will need to run that install again before they can use that product.
 Test packages in high-traffic environments where users request the installation of many applications. For more information, see _MSIExecute Mutex.
1601
 Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB
 Ensure that the custom action costs do not exceed available space.
1602
 Are you sure you want to cancel?
1603
 The file [2][3] is being held in use by the following process: Name: [4], Id: [5], Window Title: '[6]'.
 A system restart may be required because the file being updated is also currently in use. Users may be given the opportunity to avoid some system restarts by using the FilesInUse Dialog or the MsiRMFilesInUse Dialog. For more information, see System Reboots and Logging of Reboot Requests.
1604
 The product '[2]' is already installed, and has prevented the installation of this product.
1605
 Out of disk space -- Volume: '[2]'; required space: [3] KB; available space: [4] KB. If rollback is disabled, enough space is available. Click Cancel to quit, Retry to check available disk space again, or Ignore to continue without rollback.
 Ensure that the custom action costs do not exceed the available space.
1606
 Could not access location [2].
 Do not list directories in the Directory table which are not used by the installation.
Rarely, this message is due to the issue discussed by KB886549.
1607
 The following applications should be closed before continuing the install:
 A system restart may be required because a file that is being updated is also currently in use. Users may be given the opportunity to avoid some system restarts by selecting to close some applications. For more information, see System Reboots.
1608
 Could not find any previously installed compliant products on the machine for installing this product
 No file listed in the CCPSearch table can be found on the user's computer.
1609
 An error occurred while applying security settings. [2] is not a valid user or group. This could be a problem with the package, or a problem connecting to a domain controller on the network. Check your network connection and click Retry, or Cancel to end the install. Unable to locate the user's SID, system error [3]
1610
 The setup must update files or services that cannot be updated while the system is running. If you choose to continue, a reboot will be required to complete the setup.
Available in Windows Installer version 4.0.
1611
 The setup was unable to automatically close all requested applications. Please ensure that the applications holding files in use are closed before continuing with the installation.
Available in Windows Installer version 4.0.
1651
 Admin user failed to apply patch for a per-user managed or a per-machine application which is in advertise state.
Available in Windows Installer version 3.0.
1701
 [2] is not a valid entry for a product ID.
1702
 Configuring [2] cannot be completed until you restart your system. To restart now and resume configuration click Yes, or click No to stop this configuration.
 A scheduled system restart message. For more information, see System Reboots and ScheduleReboot Action. This message may be customized using the Error table.
1703
 For the configuration changes made to [2] to take effect you must restart your system. To restart now click Yes, or click No if you plan to manually restart at a later time.
 The scheduled system restart message when no other users are logged on the computer. For more information, see System Reboots and ScheduleReboot Action. This message may be customized using the Error table.
1704
 An install for [2] is currently suspended. You must undo the changes made by that install to continue. Do you want to undo those changes?
1705
 A previous install for this product is in progress. You must undo the changes made by that install to continue. Do you want to undo those changes?
1706
 No valid source could be found for product [2].
1707
 Installation operation completed successfully.
1708
 Installation operation failed.
1709
 Product: [2] -- [3]
1710
 You may either restore your computer to its previous state or continue the install later. Would you like to restore?
1711
 An error occurred while writing installation information to disk. Check to make sure enough disk space is available, and click Retry, or Cancel to end the install.
1712
 One or more of the files required to restore your computer to its previous state could not be found. Restoration will not be possible.
1713
 [2] cannot install one of its required products. Contact your technical support group. System Error: [3].
1714
 The older version of [2] cannot be removed. Contact your technical support group. System Error [3].
1715
 Installed [2].
1716
 Configured [2].
1717
 Removed [2].
1718
 File [2] was rejected by digital signature policy.
 A very large installation may cause the operating system to run out of memory.
1719
 Windows Installer service could not be accessed. Contact your support personnel to verify that it is properly registered and enabled.
1720
 There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action [2] script error [3], [4]: [5] Line [6], Column [7], [8]
1721
 There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Action: [2], location: [3], command: [4]
1722
 There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action [2], location: [3], command: [4]
1723
 There is a problem with this Windows Installer package. A DLL required for this install to complete could not be run. Contact your support personnel or package vendor. Action [2], entry: [3], library: [4]
 Ensure that the functions used by custom actions are actually exported. For more information about custom actions based upon a DLL, see Dynamic-Link Libraries.
1724
 Removal completed successfully.
1725
 Removal failed.
1726
 Advertisement completed successfully.
1727
 Advertisement failed.
1728
 Configuration completed successfully.
1729
 Configuration failed.
1730
 You must be an Administrator to remove this application. To remove this application, you can log on as an administrator, or contact your technical support group for assistance.
1731
 The source installation package for the product [2] is out of sync with the client package. Try the installation again using a valid copy of the installation package '[3]'.
 Available beginning with Windows Installer for Windows Server 2003.
1732
 In order to complete the installation of [2], you must restart the computer. Other users are currently logged on to this computer, and restarting may cause them to lose their work. Do you want to restart now?
The scheduled system restart message when other users are logged on the computer. For more information, see System Reboots and ScheduleReboot Action. This message may be customized using the Error table.
Available beginning with Windows Installer for Windows Server 2003.
1801
 The path [2] is not valid
1802
 Out of memory
1803
 There is no disk in drive [2]. Please, insert one and click Retry, or click Cancel to go back to the previously selected volume.
1804
 There is no disk in drive [2]. Please, insert one and click Retry, or click Cancel to return to the browse dialog and select a different volume.
1805
 The path [2] does not exist
1806
 You have insufficient privileges to read this folder.
1807
 A valid destination folder for the install could not be determined.
1901
 Error attempting to read from the source install database: [2]
1902
 Scheduling restart operation: Renaming file [2] to [3]. Must restart to complete operation.
 An file being updated by the installation is currently in use. Windows Installer renames the file to update it and removes the old version at the next restart of the system.
1903
 Scheduling restart operation: Deleting file [2]. Must restart to complete operation.
 A system restart may be required because the file that is being updated is also currently in use. Users may be given the opportunity to avoid some system restarts by using the FilesInUse Dialog or MsiRMFilesInUse Dialog. For more information, see System Reboots and Logging of Reboot Requests.
1904
 Module [2] failed to register. HRESULT [3].
1905
 Module [2] failed to unregister. HRESULT [3].
1906
 Failed to cache package [2]. Error: [3]
1907
 Could not register font [2]. Verify that you have sufficient permissions to install fonts, and that the system supports this font.
1908
 Could not unregister font [2]. Verify that you have sufficient permissions to remove fonts.
1909
 Could not create shortcut [2]. Verify that the destination folder exists and that you can access it.
1910
 Could not remove shortcut [2]. Verify that the shortcut file exists and that you can access it.
1911
 Could not register type library for file [2]. Contact your support personnel.
 Error loading a type library or DLL.
1912
 Could not unregister type library for file [2]. Contact your support personnel.
 Error loading a type library or DLL.
1913
 Could not update the .ini file [2][3]. Verify that the file exists and that you can access it.
1914
 Could not schedule file [2] to replace file [3] on restart. Verify that you have write permissions to file [3].
1915
 Error removing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.
1916
 Error installing ODBC driver manager, ODBC error [2]: [3]. Contact your support personnel.
1917
 Error removing ODBC driver: [4], ODBC error [2]: [3]. Verify that you have sufficient privileges to remove ODBC drivers.
1918
 Error installing ODBC driver: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.
1919
 Error configuring ODBC data source: [4], ODBC error [2]: [3]. Verify that the file [4] exists and that you can access it.
1920
 Service '[2]' ([3]) failed to start. Verify that you have sufficient privileges to start system services.
1921
 Service '[2]' ([3]) could not be stopped. Verify that you have sufficient privileges to stop system services.
1922
 Service '[2]' ([3]) could not be deleted. Verify that you have sufficient privileges to remove system services.
1923
 Service '[2]' ([3]) could not be installed. Verify that you have sufficient privileges to install system services.
1924
 Could not update environment variable '[2]'. Verify that you have sufficient privileges to modify environment variables.
1925
 You do not have sufficient privileges to complete this installation for all users of the machine. Log on as administrator and then retry this installation.
1926
 Could not set file security for file '[3]'. Error: [2]. Verify that you have sufficient privileges to modify the security permissions for this file.
1927
 The installation requires COM+ Services to be installed.
1928
 The installation failed to install the COM+ Application.
1929
 The installation failed to remove the COM+ Application.
1930
 The description for service '[2]' ([3]) could not be changed.
1931
 The Windows Installer service cannot update the system file [2] because the file is protected by Windows. You may need to update your operating system for this program to work correctly. Package version: [3], OS Protected version: [4]
 Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the SFPCatalog table.
1932
 The Windows Installer service cannot update the protected Windows file [2]. Package version: [3], OS Protected version: [4], SFP Error: [5]
 Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the SFPCatalog table.
1933
 The Windows Installer service cannot update one or more protected Windows files. SFP Error: [2]. List of protected files:\r\n[3]
 Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the SFPCatalog table.
1934
 User installations are disabled through policy on the machine.
1935
 An error occurred during the installation of assembly component [2]. HRESULT: [3]. {{assembly interface: [4], function: [5], assembly name: [6]}}
 For more information, see Assemblies.
Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.
1935
 An error occurred during the installation of assembly '[6]'. Please refer to Help and Support for more information. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}
 For more information, see Assemblies.
Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.
Available beginning with Windows Installer for Windows Server 2003.
1936
 An error occurred during the installation of assembly '[6]'. The assembly is not strongly named or is not signed with the minimal key length. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}
 For more information, see Assemblies.
Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.
Available beginning with Windows Installer for Windows Server 2003.
1937
 An error occurred during the installation of assembly '[6]'. The signature or catalog could not be verified or is not valid. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}
For more information, see Assemblies.
Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.
Available beginning with Windows Installer for Windows Server 2003.
1938
 An error occurred during the installation of assembly '[6]'. One or more modules of the assembly could not be found. HRESULT: [3]. {{assembly interface: [4], function: [5], component: [2]}}
For more information, see Assemblies.
Help and Support may have published a KB article that discusses the installation of this assembly. Go to the Search the Support Knowledge Base page and search for articles that discuss this Windows Installer error message.
Available beginning with Windows Installer for Windows Server 2003.
1939
 Service '[2]' ([3]) could not be configured. This could be a problem with the package or your permissions. Verify that you have sufficient privileges to configure system services.
For information, seeUsing Services Configuration.
Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.
1940
 Service '[2]' ([3]) could not be configured. Configuring services is supported only on Windows Vista/Server 2008 and above.
For information, seeUsing Services Configuration.
Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.
1941
 Both LockPermissions and MsiLockPermissionsEx tables were found in the package. Only one of them should be present. This is a problem with the package.
A package cannot contain both the MsiLockPermissionsEx Table and the LockPermissions Table.
Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.
1942
 Multiple conditions ('[2]' and '[3]')have resolved to true while installing Object [4] (from table [5]). This may be a problem with the package.
Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.
1943
 SDDL string '[2]' for object [3](in table [4]) could not be resolved into a valid Security Descriptor.
See Securing Resources for information on using MsiLockPermissionsEx table.
Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.
1944
 Could not set security for service '[3]'. Error: [2]. Verify that you have sufficient privileges to modify the security permissions for this service.
Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.
1945
 You do not have sufficient privileges to complete the re-advertisement of this product. Re-advertisement requires initiation by a local system account calling the MsiAdvertiseScript API
 The process calling MsiAdvertiseScript must be running under the LocalSystem account.
Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.
1946
 Property '[2]' for shortcut '[3]' could not be set.{{ HRESULT [4].}}
 This message is returned as a warning, and the installation continues, if Windows Installer is unable to set a shortcut property specified in the MsiShortcutProperty table.
Available beginning with Windows Installer 5.0 for Windows 7 and Windows Server 2008 R2.
2101
 Shortcuts not supported by the operating system.
2102
 Invalid .ini action: [2]
2103
 Could not resolve path for shell folder [2].
2104
 Writing .ini file: [3]: System error: [2].
2105
 Shortcut Creation [3] Failed. System error: [2].
2106
 Shortcut Deletion [3] Failed. System error: [2].
2107
 Error [3] registering type library [2].
2108
 Error [3] unregistering type library [2].
2109
 Section missing for .ini action.
2110
 Key missing for .ini action.
2111
 Detection of running applications failed, could not get performance data. Registered operation returned : [2].
2112
 Detection of running applications failed, could not get performance index. Registered operation returned : [2].
2113
 Detection of running applications failed.
2200
 Database: [2]. Database object creation failed, mode = [3].
2201
 Database: [2]. Initialization failed, out of memory.
2202
 Database: [2]. Data access failed, out of memory.
2203
 Database: [2]. Cannot open database file. System error [3].
2204
 Database: [2]. Table already exists: [3].
2205
 Database: [2]. Table does not exist: [3].
2206
 Database: [2]. Table could not be dropped: [3].
2207
 Database: [2]. Intent violation.
2208
 Database: [2]. Insufficient parameters for Execute.
2209
 Database: [2]. Cursor in invalid state.
2210
 Database: [2]. Invalid update data type in column [3].
2211
 Database: [2]. Could not create database table [3].
2212
 Database: [2]. Database not in writable state.
2213
 Database: [2]. Error saving database tables.
2214
 Database: [2]. Error writing export file: [3].
2215
 Database: [2]. Cannot open import file: [3].
2216
 Database: [2]. Import file format error: [3], Line [4].
2217
 Database: [2]. Wrong state to CreateOutputDatabase [3].
2218
 Database: [2]. Table name not supplied.
2219
 Database: [2]. Invalid Installer database format.
2220
 Database: [2]. Invalid row/field data.
2221
 Database: [2]. Code page conflict in import file: [3].
2222
 Database: [2]. Transform or merge code page [3] differs from database code page [4].
2223
 Database: [2]. Databases are the same. No transform generated.
2224
 Database: [2]. GenerateTransform: Database corrupt. Table: [3].
2225
 Database: [2]. Transform: Cannot transform a temporary table. Table: [3].
2226
 Database: [2]. Transform failed.
2227
 Database: [2]. Invalid identifier '[3]' in SQL query: [4].
2228
 Database: [2]. Unknown table '[3]' in SQL query: [4].
2229
 Database: [2]. Could not load table '[3]' in SQL query: [4].
2230
 Database: [2]. Repeated table '[3]' in SQL query: [4].
2231
 Database: [2]. Missing ')' in SQL query: [3].
2232
 Database: [2]. Unexpected token '[3]' in SQL query: [4].
2233
 Database: [2]. No columns in SELECT clause in SQL query: [3].
2234
 Database: [2]. No columns in ORDER BY clause in SQL query: [3].
2235
 Database: [2]. Column '[3]' not present or ambiguous in SQL query: [4].
2236
 Database: [2]. Invalid operator '[3]' in SQL query: [4].
2237
 Database: [2]. Invalid or missing query string: [3].
2238
 Database: [2]. Missing FROM clause in SQL query: [3].
2239
 Database: [2]. Insufficient values in INSERT SQL statement.
2240
 Database: [2]. Missing update columns in UPDATE SQL statement.
2241
 Database: [2]. Missing insert columns in INSERT SQL statement.
2242
 Database: [2]. Column '[3]' repeated.
2243
 Database: [2]. No primary columns defined for table creation.
2244
 Database: [2]. Invalid type specifier '[3]' in SQL query [4].
2245
 IStorage::Stat failed with error [3].
2246
 Database: [2]. Invalid Installer transform format.
2247
 Database: [2] Transform stream read/write failure.
2248
 Database: [2] GenerateTransform/Merge: Column type in base table does not match reference table. Table: [3] Col #: [4].
2249
 Database: [2] GenerateTransform: More columns in base table than in reference table. Table: [3].
2250
 Database: [2] Transform: Cannot add existing row. Table: [3].
2251
 Database: [2] Transform: Cannot delete row that does not exist. Table: [3].
2252
 Database: [2] Transform: Cannot add existing table. Table: [3].
2253
 Database: [2] Transform: Cannot delete table that does not exist. Table: [3].
2254
 Database: [2] Transform: Cannot update row that does not exist. Table: [3].
2255
 Database: [2] Transform: Column with this name already exists. Table: [3] Col: [4].
2256
 Database: [2] GenerateTransform/Merge: Number of primary keys in base table does not match reference table. Table: [3].
2257
 Database: [2]. Intent to modify read only table: [3].
2258
 Database: [2]. Type mismatch in parameter: [3].
2259
 Database: [2] Table(s) Update failed
 Queries must adhere to the restricted Windows Installer SQL syntax.
2260
 Storage CopyTo failed. System error: [3].
2261
 Could not remove stream [2]. System error: [3].
2262
 Stream does not exist: [2]. System error: [3].
2263
 Could not open stream [2]. System error: [3].
2264
 Could not remove stream [2]. System error: [3].
2265
 Could not commit storage. System error: [3].
2266
 Could not rollback storage. System error: [3].
2267
 Could not delete storage [2]. System error: [3].
2268
 Database: [2]. Merge: There were merge conflicts reported in [3] tables.
2269
 Database: [2]. Merge: The column count differed in the '[3]' table of the two databases.
2270
 Database: [2]. GenerateTransform/Merge: Column name in base table does not match reference table. Table: [3] Col #: [4].
2271
 SummaryInformation write for transform failed.
2272
 Database: [2]. MergeDatabase will not write any changes because the database is open read-only.
2273
 Database: [2]. MergeDatabase: A reference to the base database was passed as the reference database.
2274
 Database: [2]. MergeDatabase: Unable to write errors to Error table. Could be due to a non-nullable column in a predefined Error table.
2275
 Database: [2]. Specified Modify [3] operation invalid for table joins.
2276
 Database: [2]. Code page [3] not supported by the system.
2277
 Database: [2]. Failed to save table [3].
2278
 Database: [2]. Exceeded number of expressions limit of 32 in WHERE clause of SQL query: [3].
2279
 Database: [2] Transform: Too many columns in base table [3].
2280
 Database: [2]. Could not create column [3] for table [4].
2281
 Could not rename stream [2]. System error: [3].
2282
 Stream name invalid [2].
2302
 Patch notify: [2] bytes patched to far.
2303
 Error getting volume info. GetLastError: [2].
2304
 Error getting disk free space. GetLastError: [2]. Volume: [3].
2305
 Error waiting for patch thread. GetLastError: [2].
2306
 Could not create thread for patch application. GetLastError: [2].
2307
 Source file key name is null.
2308
 Destination file name is null.
2309
 Attempting to patch file [2] when patch already in progress.
2310
 Attempting to continue patch when no patch is in progress.
2315
 Missing path separator: [2].
2318
 File does not exist: [2].
2319
 Error setting file attribute: [3] GetLastError: [2].
2320
 File not writable: [2].
2321
 Error creating file: [2].
2322
 User canceled.
2323
 Invalid file attribute.
2324
 Could not open file: [3] GetLastError: [2].
2325
 Could not get file time for file: [3] GetLastError: [2].
2326
 Error in FileToDosDateTime.
2327
 Could not remove directory: [3] GetLastError: [2].
2328
 Error getting file version info for file: [2].
2329
 Error deleting file: [3]. GetLastError: [2].
2330
 Error getting file attributes: [3]. GetLastError: [2].
2331
 Error loading library [2] or finding entry point [3].
2332
 Error getting file attributes. GetLastError: [2].
2333
 Error setting file attributes. GetLastError: [2].
2334
 Error converting file time to local time for file: [3]. GetLastError: [2].
2335
 Path: [2] is not a parent of [3].
2336
 Error creating temp file on path: [3]. GetLastError: [2].
2337
 Could not close file: [3] GetLastError: [2].
2338
 Could not update resource for file: [3] GetLastError: [2].
2339
 Could not set file time for file: [3] GetLastError: [2].
2340
 Could not update resource for file: [3], Missing resource.
2341
 Could not update resource for file: [3], Resource too large.
2342
 Could not update resource for file: [3] GetLastError: [2].
2343
 Specified path is empty.
2344
 Could not find required file IMAGEHLP.DLL to validate file:[2].
2345
 [2]: File does not contain a valid checksum value.
2347
 User ignore.
2348
 Error attempting to read from cabinet stream.
2349
 Copy resumed with different info.
2350
 FDI server error
2351
 File key '[2]' not found in cabinet '[3]'. The installation cannot continue.
2352
 Could not initialize cabinet file server. The required file 'CABINET.DLL' may be missing.
2353
 Not a cabinet.
2354
 Cannot handle cabinet.
2355
 Corrupt cabinet.
2356
 Could not locate cabinet in stream: [2].
 When troubleshooting embedded streams, you may use WiStream.vbs to list the streams and use Msidb.exe to export the streams.
2357
 Cannot set attributes.
2358
 Error determining whether file is in-use: [3]. GetLastError: [2].
2359
 Unable to create the target file - file may be in use.
2360
 Progress tick.
2361
 Need next cabinet.
2362
 Folder not found: [2].
2363
 Could not enumerate subfolders for folder: [2].
2364
 Bad enumeration constant in CreateCopier call.
2365
 Could not BindImage exe file [2].
2366
 User failure.
2367
 User abort.
2368
 Failed to get network resource information. Error [2], network path [3]. Extended error: network provider [5], error code [4], error description [6].
2370
 Invalid CRC checksum value for [2] file.{ Its header says [3] for checksum, its computed value is [4].}
2371
 Could not apply patch to file [2]. GetLastError: [3].
2372
 Patch file [2] is corrupt or of an invalid format. Attempting to patch file [3]. GetLastError: [4].
2373
 File [2] is not a valid patch file.
2374
 File [2] is not a valid destination file for patch file [3].
2375
 Unknown patching error: [2].
2376
 Cabinet not found.
2379
 Error opening file for read: [3] GetLastError: [2].
2380
 Error opening file for write: [3]. GetLastError: [2].
2381
 Directory does not exist: [2].
2382
 Drive not ready: [2].
2401
 64-bit registry operation attempted on 32-bit operating system for key [2].
2402
 Out of memory.
2501
 Could not create rollback script enumerator.
2502
 Called InstallFinalize when no install in progress.
2503
 Called RunScript when not marked in progress.
2601
 Invalid value for property [2]: '[3]'
2602
 The [2] table entry '[3]' has no associated entry in the Media table.
2603
 Duplicate table name [2].
2604
 [2] Property undefined.
2605
 Could not find server [2] in [3] or [4].
2606
 Value of property [2] is not a valid full path: '[3]'.
2607
 Media table not found or empty (required for installation of files).
2608
 Could not create security descriptor for object. Error: '[2]'.
2609
 Attempt to migrate product settings before initialization.
2611
 The file [2] is marked as compressed, but the associated media entry does not specify a cabinet.
2612
 Stream not found in '[2]' column. Primary key: '[3]'.
2613
 RemoveExistingProducts action sequenced incorrectly.
2614
 Could not access IStorage object from installation package.
2615
 Skipped unregistration of Module [2] due to source resolution failure.
2616
 Companion file [2] parent missing.
2617
 Shared component [2] not found in Component table.
2618
 Isolated application component [2] not found in Component table.
2619
 Isolated components [2], [3] not part of same feature.
2620
 Key file of isolated application component [2] not in File table.
2621
 Resource DLL or Resource ID information for shortcut [2] set incorrectly.
Available with Windows Installer version 4.0.
2701
 The depth of a feature exceeds the acceptable tree depth of [2] levels.
 The maximum depth of any feature is 16. This error is returned if a feature that exceeds the maximum depth exists.
2702
 A Feature table record ([2]) references a non-existent parent in the Attributes field.
2703
 Property name for root source path not defined: [2]
2704
 Root directory property undefined: [2]
2705
 Invalid table: [2]; Could not be linked as tree.
2706
 Source paths not created. No path exists for entry [2] in Directory table.
2707
 Target paths not created. No path exists for entry [2] in Directory table.
2708
 No entries found in the file table.
2709
 The specified Component name ('[2]') not found in Component table.
2710
 The requested 'Select' state is illegal for this Component.
2711
 The specified Feature name ('[2]') not found in Feature table.
2712
 Invalid return from modeless dialog: [3], in action [2].
2713
 Null value in a non-nullable column ('[2]') in '[3]' column of the '[4]' table.
2714
 Invalid value for default folder name: [2].
2715
 The specified File key ('[2]') not found in the File table.
2716
 Could not create a random subcomponent name for component '[2]'.
 May occur if the first 40 characters of two or more component names are identical. Ensure that the first 40 characters of component names are unique to the component.
2717
 Bad action condition or error calling custom action '[2]'.
2718
 Missing package name for product code '[2]'.
2719
 Neither UNC nor drive letter path found in source '[2]'.
2720
 Error opening source list key. Error: '[2]'
2721
 Custom action [2] not found in Binary table stream.
2722
 Custom action [2] not found in File table.
2723
 Custom action [2] specifies unsupported type.
2724
 The volume label '[2]' on the media you're running from does not match the label '[3]' given in the Media table. This is allowed only if you have only 1 entry in your Media table.
2725
 Invalid database tables
2726
 Action not found: [2].
2727
 The directory entry '[2]' does not exist in the Directory table.
2728
 Table definition error: [2]
2729
 Install engine not initialized.
2730
 Bad value in database. Table: '[2]'; Primary key: '[3]'; Column: '[4]'
2731
 Selection Manager not initialized.
 The selection manager is responsible for determining component and feature states. It is initialized during the costing actions ( CostInitialize action, FileCost action, and CostFinalize action.) A standard action or custom action made a call to a function requiring the selection manager before the initialization of the selection manager. This action should be sequenced after the costing actions.
2732
 Directory Manager not initialized.
 The directory manager is responsible for determining the target and source paths. It is initialized during the costing actions (CostInitialize action, FileCost action, and CostFinalize action). A standard action or custom action made a call to a function requiring the directory manager before the initialization of the directory manager. This action should be sequenced after the costing actions.
2733
 Bad foreign key ('[2]') in '[3]' column of the '[4]' table.
2734
 Invalid reinstall mode character.
2735
 Custom action '[2]' has caused an unhandled exception and has been stopped. This may be the result of an internal error in the custom action, such as an access violation.
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2736
 Generation of custom action temp file failed: [2].
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2737
 Could not access custom action [2], entry [3], library [4]
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2738
 Could not access VBScript run time for custom action [2].
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2739
 Could not access JScript run time for custom action [2].
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2740
 Custom action [2] script error [3], [4]: [5] Line [6], Column [7], [8].
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2741
 Configuration information for product [2] is corrupt. Invalid info: [2].
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2742
 Marshaling to Server failed: [2].
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2743
 Could not execute custom action [2], location: [3], command: [4].
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2744
 EXE failed called by custom action [2], location: [3], command: [4].
 This error is caused by a custom action that is based on Dynamic-Link Libraries. When trouble-shooting the DLL you may need to use one or more of the tools described in KB198038.
2745
 Transform [2] invalid for package [3]. Expected language [4], found language [5].
 The language ID that is specified by the ProductLanguage property must be contained in the Template Summary property. Perform package validation and check for ICE80.
2746
 Transform [2] invalid for package [3]. Expected product [4], found product [5].
2747
 Transform [2] invalid for package [3]. Expected product version < [4], found product version [5].
2748
 Transform [2] invalid for package [3]. Expected product version <= [4], found product version [5].
2749
 Transform [2] invalid for package [3]. Expected product version == [4], found product version [5].
2750
 Transform [2] invalid for package [3]. Expected product version >= [4], found product version [5].
2751
 Transform [2] invalid for package [3]. Expected product version > [4], found product version [5].
2752
 Could not open transform [2] stored as child storage of package [4].
2753
 The File '[2]' is not marked for installation.
2754
 The File '[2]' is not a valid patch file.
2755
 Server returned unexpected error [2] attempting to install package [3].
2756
 The property '[2]' was used as a directory property in one or more tables, but no value was ever assigned.
2757
 Could not create summary info for transform [2].
2758
 Transform [2] does not contain an MSI version.
2759
 Transform [2] version [3] incompatible with engine; Min: [4], Max: [5].
2760
 Transform [2] invalid for package [3]. Expected upgrade code [4], found [5].
2761
 Cannot begin transaction. Global mutex not properly initialized.
2762
 Cannot write script record. Transaction not started.
 The InstallExecuteSequence may have been authored incorrectly. Actions that change the system must be sequenced between the InstallInitialize and InstallFinalize actions. Perform package validation and check for ICE77.
2763
 Cannot run script. Transaction not started.
2765
 Assembly name missing from AssemblyName table : Component: [4].
2766
 The file [2] is an invalid MSI storage file.
2767
 No more data{ while enumerating [2]}.
2768
 Transform in patch package is invalid.
2769
 Custom Action [2] did not close [3] MSIHANDLEs.
 The InstallExecuteSequence may have been authored incorrectly. Actions that change the system must be sequenced between the InstallInitialize and InstallFinalize actions. Perform package validation and check for ICE77.
2770
 Cached folder [2] not defined in internal cache folder table.
2771
 Upgrade of feature [2] has a missing component. .
 Available beginning with Windows Installer version 3.0.
2772
 New upgrade feature [2] must be a leaf feature.
 Available beginning with Windows Installer version 3.0.
2801
 Unknown Message -- Type [2]. No action is taken.
2802
 No publisher is found for the event [2].
2803
 Dialog View did not find a record for the dialog [2].
2804
 On activation of the control [3] on dialog [2] CMsiDialog failed to evaluate the condition [3].
2805
2806
 The dialog [2] failed to evaluate the condition [3].
2807
 The action [2] is not recognized.
2808
 Default button is ill-defined on dialog [2].
2809
 On the dialog [2] the next control pointers do not form a cycle. There is a pointer from [3] to [4], but there is no further pointer.
2810
 On the dialog [2] the next control pointers do not form a cycle. There is a pointer from both [3] and [5] to [4].
2811
 On dialog [2] control [3] has to take focus, but it is unable to do so.
2812
 The event [2] is not recognized.
2813
 The EndDialog event was called with the argument [2], but the dialog has a parent
2814
 On the dialog [2] the control [3] names a nonexistent control [4] as the next control.
2815
 ControlCondition table has a row without condition for the dialog [2].
2816
 The EventMapping table refers to an invalid control [4] on dialog [2] for the event [3].
2817
 The event [2] failed to set the attribute for the control [4] on dialog [3].
2818
 In the ControlEvent table EndDialog has an unrecognized argument [2].
2819
 Control [3] on dialog [2] needs a property linked to it.
2820
 Attempted to initialize an already initialized handler.
2821
 Attempted to initialize an already initialized dialog: [2].
2822
 No other method can be called on dialog [2] until all the controls are added.
2823
 Attempted to initialize an already initialized control: [3] on dialog [2].
2824
 The dialog attribute [3] needs a record of at least [2] field(s).
2825
 The control attribute [3] needs a record of at least [2] field(s).
2826
 Control [3] on dialog [2] extends beyond the boundaries of the dialog [4] by [5] pixels.
2827
 The button [4] on the radio button group [3] on dialog [2] extends beyond the boundaries of the group [5] by [6] pixels.
2828
 Tried to remove control [3] from dialog [2], but the control is not part of the dialog.
2829
 Attempt to use an uninitialized dialog.
2830
 Attempt to use an uninitialized control on dialog [2].
2831
 The control [3] on dialog [2] does not support [5] the attribute [4].
2832
 The dialog [2] does not support the attribute [3].
2833
 Control [4] on dialog [3] ignored the message [2].
2834
 The next pointers on the dialog [2] do not form a single loop.
2835
 The control [2] was not found on dialog [3].
2836
 The control [3] on the dialog [2] cannot take focus.
2837
 The control [3] on dialog [2] wants the winproc to return [4].
2838
 The item [2] in the selection table has itself as a parent.
2839
 Setting the property [2] failed.
2840
 Error dialog name mismatch.
2841
 No OK button was found on the error dialog.
2842
 No text field was found on the error dialog.
2843
 The ErrorString attribute is not supported for standard dialogs.
2844
 Cannot execute an error dialog if the Errorstring is not set.
2845
 The total width of the buttons exceeds the size of the error dialog.
2846
 SetFocus did not find the required control on the error dialog.
2847
 The control [3] on dialog [2] has both the icon and the bitmap style set.
2848
 Tried to set control [3] as the default button on dialog [2], but the control does not exist.
2849
 The control [3] on dialog [2] is of a type, that cannot be integer valued.
2850
 Unrecognized volume type.
2851
 The data for the icon [2] is not valid.
2852
 At least one control has to be added to dialog [2] before it is used.
2853
 Dialog [2] is a modeless dialog. The execute method should not be called on it.
2854
 On the dialog [2] the control [3] is designated as first active control, but there is no such control.
2855
 The radio button group [3] on dialog [2] has fewer than 2 buttons.
2856
 Creating a second copy of the dialog [2].
2857
 The directory [2] is mentioned in the selection table but not found.
2858
 The data for the bitmap [2] is not valid.
2859
 Test error message.
2860
 Cancel button is ill-defined on dialog [2].
2861
 The next pointers for the radio buttons on dialog [2] control [3] do not form a cycle.
2862
 The attributes for the control [3] on dialog [2] do not define a valid icon size. Setting the size to 16.
2863
 The control [3] on dialog [2] needs the icon [4] in size [5]x[5], but that size is not available. Loading the first available size.
2864
 The control [3] on dialog [2] received a browse event, but there is no configurable directory for the present selection. Likely cause: browse button is not authored correctly.
2865
 Control [3] on billboard [2] extends beyond the boundaries of the billboard [4] by [5] pixels.
2866
 The dialog [2] is not allowed to return the argument [3].
2867
 The error dialog property is not set.
2868
 The error dialog [2] does not have the error style bit set.
2869
 The dialog [2] has the error style bit set, but is not an error dialog.
2870
 The help string [4] for control [3] on dialog [2] does not contain the separator character.
2871
 The [2] table is out of date: [3].
2872
 The argument of the CheckPath control event on dialog [2] is invalid.
 Where "CheckPath" can be the CheckTargetPath, SetTargetPath or the CheckExistingTargetPath control events.
2873
 On the dialog [2] the control [3] has an invalid string length limit: [4].
2874
 Changing the text font to [2] failed.
2875
 Changing the text color to [2] failed.
2876
 The control [3] on dialog [2] had to truncate the string: [4].
2877
 The binary data [2] was not found
2878
 On the dialog [2] the control [3] has a possible value: [4]. This is an invalid or duplicate value.
2879
 The control [3] on dialog [2] cannot parse the mask string: [4].
2880
 Do not perform the remaining control events.
2881
 CMsiHandler initialization failed.
2882
 Dialog window class registration failed.
2883
 CreateNewDialog failed for the dialog [2].
2884
 Failed to create a window for the dialog [2].
2885
 Failed to create the control [3] on the dialog [2].
 This can be caused by attempting to display a dialog with a Hyperlink control using Windows Installer 4.5 or earlier. The Hyperlink control requires Windows Installer 5.0. In this case, author two versions of the dialog, one with the control and one without. Use conditional statements to display the dialog box without the control if the VersionMsi property is less than “5.00”. Display the dialog with the Hyperlink control if VersionMsi is greater than or equal to “5.00”.
2886
 Creating the [2] table failed.
2887
 Creating a cursor to the [2] table failed.
2888
 Executing the [2] view failed.
2889
 Creating the window for the control [3] on dialog [2] failed.
2890
 The handler failed in creating an initialized dialog.
2891
 Failed to destroy window for dialog [2].
2892
 [2] is an integer only control, [3] is not a valid integer value.
2893
 The control [3] on dialog [2] can accept property values that are at most [5] characters long. The value [4] exceeds this limit, and has been truncated.
2894
 Loading RICHED20.DLL failed. GetLastError() returned: [2].
2895
 Freeing RICHED20.DLL failed. GetLastError() returned: [2].
2896
 Executing action [2] failed.
2897
 Failed to create any [2] font on this system.
2898
 For [2] textstyle, the system created a '[3]' font, in [4] character set.
2899
 Failed to create [2] textstyle. GetLastError() returned: [3].
2901
 Invalid parameter to operation [2]: Parameter [3].
2902
 Operation [2] called out of sequence.
 May indicate that the installation of Win32 assemblies was authored incorrectly. A Win32 side-by-side component may need a key path.
2903
 The file [2] is missing.
2904
 Could not BindImage file [2].
2905
 Could not read record from script file [2].
2906
 Missing header in script file [2].
2907
 Could not create secure security descriptor. Error: [2].
2908
 Could not register component [2].
2909
 Could not unregister component [2].
2910
 Could not determine user's security ID.
2911
 Could not remove the folder [2].
2912
 Could not schedule file [2] for removal on restart.
2919
 No cabinet specified for compressed file: [2].
2920
 Source directory not specified for file [2].
2924
 Script [2] version unsupported. Script version: [3], minimum version: [4], maximum version: [5].
2927
 ShellFolder id [2] is invalid.
2928
 Exceeded maximum number of sources. Skipping source '[2]'.
2929
 Could not determine publishing root. Error: [2].
2932
 Could not create file [2] from script data. Error: [3].
2933
 Could not initialize rollback script [2].
2934
 Could not secure transform [2]. Error [3].
2935
 Could not unsecure transform [2]. Error [3].
2936
 Could not find transform [2].
2937
 Windows Installer cannot install a system file protection catalog. Catalog: [2], Error: [3].
 Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the SFPCatalog table.
2938
 Windows Installer cannot retrieve a system file protection catalog from the cache. Catalog: [2], Error: [3].
 Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the SFPCatalog table.
2939
 Windows Installer cannot delete a system file protection catalog from the cache. Catalog: [2], Error: [3].
 Windows Installer protects critical system files. For more information, see Using Windows Installer and Windows Resource Protection. For Windows Me, see the InstallSFPCatalogFile action, the FileSFPCatalog table, and the SFPCatalog table.
2940
 Directory Manager not supplied for source resolution.
2941
 Unable to compute the CRC for file [2].
2942
 BindImage action has not been executed on [2] file.
2943
 This version of Windows does not support deploying 64-bit packages. The script [2] is for a 64-bit package.
2944
 GetProductAssignmentType failed.
2945
 Installation of ComPlus App [2] failed with error [3].
3001
 The patches in this list contain incorrect sequencing information: [2][3][4][5][6][7][8][9][10][11][12][13][14][15][16].
 Available beginning with Windows Installer version 3.0
3002
 Patch [2] contains invalid sequencing information.
 Available beginning with Windows Installer version 3.0