Error installing windows 10 32

Question

Hello, I'm trying to install Windows 10 32 bits in UEFI mode, but it always gives me this error, on a Dell 3050 Micro machine, already tested legacy, uefi, MCT.

I have to use 32 bits because of an application I use that only supports 32 bits.

(there is nothing installed on the machine)

Can anyone help me?

Answer 1

If you're encountering an error while trying to install Windows 10 32-bit in UEFI mode on a Dell 3050 Micro machine, there could be several reasons behind it. Here are some steps you can try to troubleshoot and resolve the issue:

Verify UEFI Compatibility: Ensure that the Dell 3050 Micro machine supports UEFI mode for 32-bit Windows 10 installations. Some older hardware might have limitations in this regard.

Secure Boot: Check if Secure Boot is enabled in the BIOS settings. Secure Boot might prevent the installation of unsigned or improperly signed operating systems. You may need to disable Secure Boot temporarily during the installation process.

UEFI Boot Order: Confirm that the boot order in the BIOS is set to prioritize UEFI boot devices. This ensures that the installation media is detected and booted in UEFI mode.

Check Installation Media: Make sure that the Windows 10 32-bit installation media is not corrupted. You can try creating a new installation USB drive using the Windows Media Creation Tool or another reliable method.

UEFI Bootable USB Drive: Ensure that the installation media is configured properly to support UEFI booting. Some tools may create USB drives that are only bootable in legacy BIOS mode. You may need to recreate the bootable USB drive with UEFI compatibility in mind.

BIOS Update: Check if there are any BIOS updates available for the Dell 3050 Micro machine. Sometimes, firmware updates address compatibility issues and improve system stability.

Hardware Compatibility: Verify that the hardware components in the Dell 3050 Micro machine are compatible with 32-bit Windows 10 in UEFI mode. Check for any known compatibility issues or driver requirements.

Error Message: Provide more details about the error message you're encountering during the installation process. This information can help diagnose the issue more accurately.

By following these steps and troubleshooting the potential causes, you should be able to install Windows 10 32-bit in UEFI mode on the Dell 3050 Micro machine successfully. If you continue to experience difficulties, you may need to contact Dell support or seek assistance from a knowledgeable technician.

Answer 2

Hi,

Thanks for your post.

According to the error message in the screenshot, the winload.efi file in your Windows 10 image is corrupted or missing.

It is recommended to download the Window 10 image using the media creation tool. Download the tool from the link below and run it as administrator. You can select 32-bit (x86) in the Architecture option.

https://www.microsoft.com/en-us/software-download/windows10

Best Regards,

Ian Xue

---

If the Answer is helpful, please click "Accept Answer" and upvote it.