Add or update your Red Hat pull secret on an Azure Red Hat OpenShift 4 cluster

Article
03/06/2023

This guide covers adding or updating your Red Hat pull secret for an existing Azure Red Hat OpenShift (ARO) 4.x cluster.

If you're creating a cluster for the first time, you can add your pull secret when you create your cluster. For more information about creating an ARO cluster with a Red Hat pull secret, see Create an Azure Red Hat OpenShift 4 cluster.

Before you begin

This guide assumes you have an existing Azure Red Hat OpenShift 4 cluster. Ensure that you have administrator access to your cluster.

Prepare your pull secret

When you create an ARO cluster without adding a Red Hat pull secret, a pull secret is still created on your cluster automatically. However, this pull secret isn't fully populated.

This section walks through updating that pull secret with additional values from your Red Hat pull secret.

Fetch the secret named pull-secret in the openshift-config namespace and save it to a separate file by running the following command:

oc get secrets pull-secret -n openshift-config -o template='{{index .data ".dockerconfigjson"}}' | base64 -d > pull-secret.json

Your output should be similar to the following. (Note that the actual secret value has been removed.)

{
    "auths": {
        "arosvc.azurecr.io": {
            "auth": "<my-aroscv.azurecr.io-secret>"
        }
    }
}

Go to your Red Hat OpenShift cluster manager portal and select Download pull secret. Your Red Hat pull secret will look like the following. (Note that the actual secret values have been removed.)

{
    "auths": {
        "cloud.openshift.com": {
            "auth": "<my-crc-secret>",
            "email": "klamenzo@redhat.com"
        },
        "quay.io": {
            "auth": "<my-quayio-secret>",
            "email": "klamenzo@redhat.com"
        },
        "registry.connect.redhat.com": {
            "auth": "<my-registry.connect.redhat.com-secret>",
            "email": "klamenzo@redhat.com"
        },
        "registry.redhat.io": {
            "auth": "<my-registry.redhat.io-secret>",
            "email": "klamenzo@redhat.com"
        }
    }
}

Edit the pull secret file you got from your cluster by adding in the entries found in your Red Hat pull secret.

Important

Including the cloud.openshift.com entry from your Red Hat pull secret will cause your cluster to start sending telemetry data to Red Hat. Include this section only if you want to send telemetry data. Otherwise, leave the following section out.

{
        "cloud.openshift.com": {
            "auth": "<my-crc-secret>",
            "email": "klamenzo@redhat.com"
        }

Caution

Do not remove or alter your the arosvc.azurecr.io entry from your pull secret. This section is needed for your cluster to function properly.

"arosvc.azurecr.io": {
            "auth": "<my-aroscv.azurecr.io-secret>"
        }

Your final file should look like the following. (Note that the actual secret values have been removed.)

{
    "auths": {
        "cloud.openshift.com": {
            "auth": "<my-crc-secret>",
            "email": "klamenzo@redhat.com"
        },
        "quay.io": {
            "auth": "<my-quayio-secret>",
            "email": "klamenzo@redhat.com"
        },
        "registry.connect.redhat.com": {
            "auth": "<my-registry.connect.redhat.com-secret>",
            "email": "klamenzo@redhat.com"
        },
        "registry.redhat.io": {
            "auth": "<my-registry.redhat.io-secret>",
            "email": "klamenzo@redhat.com"
        },
        "arosvc.azurecr.io": {
            "auth": "<my-aroscv.azurecr.io-secret>"
        }
    }
}

Ensure that the file is valid JSON. There are many ways to validate your JSON. The following example uses jq:
```
cat pull-secret.json | jq
```
Note

If an error is in the file, it appears as parse error.

Add your pull secret to your cluster

Run the following command to update your pull secret.

Note

In ARO 4.9 or older, running this command will cause your cluster nodes to restart one by one as they're updated. In ARO 4.10 version or later a restart will not be triggered.

oc set data secret/pull-secret -n openshift-config --from-file=.dockerconfigjson=./pull-secret.json

Verify that pull secret is in place

oc exec -n openshift-apiserver $(oc get pod -n openshift-apiserver -o jsonpath="{.items[0].metadata.name}") -- cat /var/lib/kubelet/config.json

After the secret is set, you're ready to enable Red Hat Certified Operators.

Modify the configuration files

Modify the following objects to enable Red Hat Operators.

First, modify the Samples Operator configuration file. Then, you can run the following command to edit the configuration file:

oc edit configs.samples.operator.openshift.io/cluster -o yaml

Change the spec.managementState value from Removed to Managed.

The following YAML snippet shows only the relevant sections of the edited YAML file:

apiVersion: samples.operator.openshift.io/v1
kind: Config
metadata:
  
  ...
  
spec:
  architectures:
  - x86_64
  managementState: Managed

Second, run the following command to edit the Operator Hub configuration file:

oc edit operatorhub cluster -o yaml

Change the Spec.Sources.Disabled value from true to false for any sources you want enabled.

The following YAML snippet shows only the relevant sections of the edited YAML file:

Name:         cluster

...
                 dd3310b9-e520-4a85-98e5-8b4779ee0f61
Spec:
  Sources:
    Disabled:  false
    Name:      certified-operators
    Disabled:  false
    Name:      redhat-operators

Save the file to apply your edits.

Validate that your secret is working

After you add your pull secret and modify the correct configuration files, your cluster can take several minutes to be updated. To check that your cluster has been updated, run the following command to show the Certified Operators and Red Hat Operators sources available:

$ oc get catalogsource -A
NAMESPACE               NAME                  DISPLAY               TYPE   PUBLISHER   AGE
openshift-marketplace   certified-operators   Certified Operators   grpc   Red Hat     10s
openshift-marketplace   community-operators   Community Operators   grpc   Red Hat     18h
openshift-marketplace   redhat-operators      Red Hat Operators     grpc   Red Hat     11s

If you don't see the Certified Operators and Red Hat Operators, wait a few minutes and try again.

To ensure that your pull secret has been updated and is working correctly, open OperatorHub and check for any Red Hat verified Operator. For example, check to see if the OpenShift Container Storage Operator is available, and see if you have permissions to install.

Next steps

To learn more about Red Hat pull secrets, see Using image pull secrets.

To learn more about Red Hat OpenShift 4, see Red Hat OpenShift Container Platform Documentation.

Share via