Try update Windows and all drivers (including the intel's one).
You may report this issue using the Feedback Hub app.
If problem persists, then check with intel's support.
This browser is no longer supported.
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.
While playing on my gaming laptop (a MSI GS66 Stealth), it began to crash while playing games which it used to run with no problem. In the reliability monitor, it gives the following hardware error:
Source
Windows
Summary
Hardware error
Date
4/6/2024 9:03 PM
Status
Report sent
Description
A problem with your hardware caused Windows to stop working correctly.
Problem signature
Problem Event Name: LiveKernelEvent
Code: 124
Parameter 1: 7
Parameter 2: ffffdf0f275be020
Parameter 3: 0
Parameter 4: 0
OS version: 10_0_22631
Service Pack: 0_0
Product: 768_1
OS Version: 10.0.22631.2.0.0.768.101
Locale ID: 1033
Extra information about the problem
Bucket ID: LKD_0x124_7_GenuineIntel_FIRMWARE_{8f87f311-c998-4d9e-a0c4-6065518c4f6d}_IMAGE_GenuineIntel.sys
How do I go about resolving this error or what could be causing it?
Try update Windows and all drivers (including the intel's one).
You may report this issue using the Feedback Hub app.
If problem persists, then check with intel's support.
This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.
Comments have been turned off. Learn more
One other thought just crossed my mind, there are a lot of hypervisor messages in your trace. Are you running this on a VM? If so, it could also be an issue with the VM configuration. I don't really use VMs, not very popular in industrial controls, but I have tinkered a bit. Maybe your VM is suggesting that there are more interrupts available than are really supported by the system. Some of the entry level chipsets only support up to eight MSI interrupts per device although PCI Express would allow up to thiry-two, for instance.
If you have updated the driver as suggested, checked the correct driver version aganst your hardware and it still crashes, maybe see what you can configure in the VM.
Try performing Clean Boot and see if the problem persists?
Have a look at:
https://support.microsoft.com/en-us/topic/how-to-perform-a-clean-boot-in-windows-da2f9573-6eec-00ad-2f8a-a97a1807f3dd
If not, enable services one by one to see which one causing the problem.