Details of the CMMC Level 3 Regulatory Compliance built-in initiative
The following article details how the Azure Policy Regulatory Compliance built-in initiative definition maps to compliance domains and controls in CMMC Level 3. For more information about this compliance standard, see CMMC Level 3. To understand Ownership, see Azure Policy policy definition and Shared responsibility in the cloud.
The following mappings are to the CMMC Level 3 controls. Many of the controls are implemented with an Azure Policy initiative definition. To review the complete initiative definition, open Policy in the Azure portal and select the Definitions page. Then, find and select the CMMC Level 3 Regulatory Compliance built-in initiative definition.
This built-in initiative is deployed as part of the CMMC Level 3 blueprint sample.
Important
Each control below is associated with one or more Azure Policy definitions. These policies may help you assess compliance with the control; however, there often is not a one-to-one or complete match between a control and one or more policies. As such, Compliant in Azure Policy refers only to the policy definitions themselves; this doesn't ensure you're fully compliant with all requirements of a control. In addition, the compliance standard includes controls that aren't addressed by any Azure Policy definitions at this time. Therefore, compliance in Azure Policy is only a partial view of your overall compliance status. The associations between compliance domains, controls, and Azure Policy definitions for this compliance standard may change over time. To view the change history, see the GitHub Commit History.
Access Control
Limit information system access to authorized users, processes acting on behalf of authorized users, and devices (including other information systems).
ID: CMMC L3 AC.1.001 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: Storage account public access should be disallowed | Anonymous public read access to containers and blobs in Azure Storage is a convenient way to share data but might present security risks. To prevent data breaches caused by undesired anonymous access, Microsoft recommends preventing public access to a storage account unless your scenario requires it. | audit, Audit, deny, Deny, disabled, Disabled | 3.1.0-preview |
Add system-assigned managed identity to enable Guest Configuration assignments on virtual machines with no identities | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration but do not have any managed identities. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Add system-assigned managed identity to enable Guest Configuration assignments on VMs with a user-assigned identity | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration and have at least one user-assigned identity but do not have a system-assigned managed identity. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
App Service apps should have remote debugging turned off | Remote debugging requires inbound ports to be opened on an App Service app. Remote debugging should be turned off. | AuditIfNotExists, Disabled | 2.0.0 |
App Service apps should not have CORS configured to allow every resource to access your apps | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your app. Allow only required domains to interact with your app. | AuditIfNotExists, Disabled | 2.0.0 |
Audit Linux machines that allow remote connections from accounts without passwords | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Linux machines that allow remote connections from accounts without passwords | AuditIfNotExists, Disabled | 3.1.0 |
Azure AI Services resources should restrict network access | By restricting network access, you can ensure that only allowed networks can access the service. This can be achieved by configuring network rules so that only applications from allowed networks can access the Azure AI service. | Audit, Deny, Disabled | 3.2.0 |
Azure Key Vault should have firewall enabled | Enable the key vault firewall so that the key vault is not accessible by default to any public IPs. Optionally, you can configure specific IP ranges to limit access to those networks. Learn more at: https://docs.microsoft.com/azure/key-vault/general/network-security | Audit, Deny, Disabled | 3.2.1 |
Azure Role-Based Access Control (RBAC) should be used on Kubernetes Services | To provide granular filtering on the actions that users can perform, use Azure Role-Based Access Control (RBAC) to manage permissions in Kubernetes Service Clusters and configure relevant authorization policies. | Audit, Disabled | 1.0.3 |
Blocked accounts with owner permissions on Azure resources should be removed | Deprecated accounts with owner permissions should be removed from your subscription. Deprecated accounts are accounts that have been blocked from signing in. | AuditIfNotExists, Disabled | 1.0.0 |
Blocked accounts with read and write permissions on Azure resources should be removed | Deprecated accounts should be removed from your subscriptions. Deprecated accounts are accounts that have been blocked from signing in. | AuditIfNotExists, Disabled | 1.0.0 |
Cognitive Services accounts should disable public network access | To improve the security of Cognitive Services accounts, ensure that it isn't exposed to the public internet and can only be accessed from a private endpoint. Disable the public network access property as described in https://go.microsoft.com/fwlink/?linkid=2129800. This option disables access from any public address space outside the Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. This reduces data leakage risks. | Audit, Deny, Disabled | 3.0.1 |
Container registries should not allow unrestricted network access | Azure container registries by default accept connections over the internet from hosts on any network. To protect your registries from potential threats, allow access from only specific private endpoints, public IP addresses or address ranges. If your registry doesn't have network rules configured, it will appear in the unhealthy resources. Learn more about Container Registry network rules here: https://aka.ms/acr/privatelink, https://aka.ms/acr/portal/public-network and https://aka.ms/acr/vnet. | Audit, Deny, Disabled | 2.0.0 |
CORS should not allow every domain to access your API for FHIR | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your API for FHIR. To protect your API for FHIR, remove access for all domains and explicitly define the domains allowed to connect. | audit, Audit, disabled, Disabled | 1.1.0 |
Deploy the Windows Guest Configuration extension to enable Guest Configuration assignments on Windows VMs | This policy deploys the Windows Guest Configuration extension to Windows virtual machines hosted in Azure that are supported by Guest Configuration. The Windows Guest Configuration extension is a prerequisite for all Windows Guest Configuration assignments and must be deployed to machines before using any Windows Guest Configuration policy definition. For more information on Guest Configuration, visit https://aka.ms/gcpol. | deployIfNotExists | 1.2.0 |
Function apps should have remote debugging turned off | Remote debugging requires inbound ports to be opened on Function apps. Remote debugging should be turned off. | AuditIfNotExists, Disabled | 2.0.0 |
Function apps should not have CORS configured to allow every resource to access your apps | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your Function app. Allow only required domains to interact with your Function app. | AuditIfNotExists, Disabled | 2.0.0 |
Guest accounts with owner permissions on Azure resources should be removed | External accounts with owner permissions should be removed from your subscription in order to prevent unmonitored access. | AuditIfNotExists, Disabled | 1.0.0 |
Guest accounts with read permissions on Azure resources should be removed | External accounts with read privileges should be removed from your subscription in order to prevent unmonitored access. | AuditIfNotExists, Disabled | 1.0.0 |
Guest accounts with write permissions on Azure resources should be removed | External accounts with write privileges should be removed from your subscription in order to prevent unmonitored access. | AuditIfNotExists, Disabled | 1.0.0 |
Kubernetes cluster pods should only use approved host network and port range | Restrict pod access to the host network and the allowable host port range in a Kubernetes cluster. This recommendation is part of CIS 5.2.4 which is intended to improve the security of your Kubernetes environments. This policy is generally available for Kubernetes Service (AKS), and preview for Azure Arc enabled Kubernetes. For more information, see https://aka.ms/kubepolicydoc. | audit, Audit, deny, Deny, disabled, Disabled | 6.1.0 |
Management ports of virtual machines should be protected with just-in-time network access control | Possible network Just In Time (JIT) access will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Public network access on Azure SQL Database should be disabled | Disabling the public network access property improves security by ensuring your Azure SQL Database can only be accessed from a private endpoint. This configuration denies all logins that match IP or virtual network based firewall rules. | Audit, Deny, Disabled | 1.1.0 |
Public network access should be disabled for MariaDB servers | Disable the public network access property to improve security and ensure your Azure Database for MariaDB can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for MySQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for MySQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.1.0 |
Public network access should be disabled for MySQL servers | Disable the public network access property to improve security and ensure your Azure Database for MySQL can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for PostgreSQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for PostgreSQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 3.0.1 |
Public network access should be disabled for PostgreSQL servers | Disable the public network access property to improve security and ensure your Azure Database for PostgreSQL can only be accessed from a private endpoint. This configuration disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.1 |
Storage accounts should allow access from trusted Microsoft services | Some Microsoft services that interact with storage accounts operate from networks that can't be granted access through network rules. To help this type of service work as intended, allow the set of trusted Microsoft services to bypass the network rules. These services will then use strong authentication to access the storage account. | Audit, Deny, Disabled | 1.0.0 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Windows machines should meet requirements for 'Security Options - Network Access' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Access' for including access for anonymous users, local accounts, and remote access to the registry. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Windows machines should meet requirements for 'Security Options - Network Security' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Security' for including Local System behavior, PKU2U, LAN Manager, LDAP client, and NTLM SSP. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Limit information system access to the types of transactions and functions that authorized users are permitted to execute.
ID: CMMC L3 AC.1.002 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: Storage account public access should be disallowed | Anonymous public read access to containers and blobs in Azure Storage is a convenient way to share data but might present security risks. To prevent data breaches caused by undesired anonymous access, Microsoft recommends preventing public access to a storage account unless your scenario requires it. | audit, Audit, deny, Deny, disabled, Disabled | 3.1.0-preview |
App Service apps should not have CORS configured to allow every resource to access your apps | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your app. Allow only required domains to interact with your app. | AuditIfNotExists, Disabled | 2.0.0 |
App Service apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 4.0.0 |
Audit Linux machines that allow remote connections from accounts without passwords | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Linux machines that allow remote connections from accounts without passwords | AuditIfNotExists, Disabled | 3.1.0 |
Azure AI Services resources should restrict network access | By restricting network access, you can ensure that only allowed networks can access the service. This can be achieved by configuring network rules so that only applications from allowed networks can access the Azure AI service. | Audit, Deny, Disabled | 3.2.0 |
Azure Key Vault should have firewall enabled | Enable the key vault firewall so that the key vault is not accessible by default to any public IPs. Optionally, you can configure specific IP ranges to limit access to those networks. Learn more at: https://docs.microsoft.com/azure/key-vault/general/network-security | Audit, Deny, Disabled | 3.2.1 |
Azure Role-Based Access Control (RBAC) should be used on Kubernetes Services | To provide granular filtering on the actions that users can perform, use Azure Role-Based Access Control (RBAC) to manage permissions in Kubernetes Service Clusters and configure relevant authorization policies. | Audit, Disabled | 1.0.3 |
Cognitive Services accounts should disable public network access | To improve the security of Cognitive Services accounts, ensure that it isn't exposed to the public internet and can only be accessed from a private endpoint. Disable the public network access property as described in https://go.microsoft.com/fwlink/?linkid=2129800. This option disables access from any public address space outside the Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. This reduces data leakage risks. | Audit, Deny, Disabled | 3.0.1 |
Container registries should not allow unrestricted network access | Azure container registries by default accept connections over the internet from hosts on any network. To protect your registries from potential threats, allow access from only specific private endpoints, public IP addresses or address ranges. If your registry doesn't have network rules configured, it will appear in the unhealthy resources. Learn more about Container Registry network rules here: https://aka.ms/acr/privatelink, https://aka.ms/acr/portal/public-network and https://aka.ms/acr/vnet. | Audit, Deny, Disabled | 2.0.0 |
CORS should not allow every domain to access your API for FHIR | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your API for FHIR. To protect your API for FHIR, remove access for all domains and explicitly define the domains allowed to connect. | audit, Audit, disabled, Disabled | 1.1.0 |
Enforce SSL connection should be enabled for MySQL database servers | Azure Database for MySQL supports connecting your Azure Database for MySQL server to client applications using Secure Sockets Layer (SSL). Enforcing SSL connections between your database server and your client applications helps protect against 'man in the middle' attacks by encrypting the data stream between the server and your application. This configuration enforces that SSL is always enabled for accessing your database server. | Audit, Disabled | 1.0.1 |
Enforce SSL connection should be enabled for PostgreSQL database servers | Azure Database for PostgreSQL supports connecting your Azure Database for PostgreSQL server to client applications using Secure Sockets Layer (SSL). Enforcing SSL connections between your database server and your client applications helps protect against 'man in the middle' attacks by encrypting the data stream between the server and your application. This configuration enforces that SSL is always enabled for accessing your database server. | Audit, Disabled | 1.0.1 |
Function apps should not have CORS configured to allow every resource to access your apps | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your Function app. Allow only required domains to interact with your Function app. | AuditIfNotExists, Disabled | 2.0.0 |
Function apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 5.0.0 |
Kubernetes cluster pods should only use approved host network and port range | Restrict pod access to the host network and the allowable host port range in a Kubernetes cluster. This recommendation is part of CIS 5.2.4 which is intended to improve the security of your Kubernetes environments. This policy is generally available for Kubernetes Service (AKS), and preview for Azure Arc enabled Kubernetes. For more information, see https://aka.ms/kubepolicydoc. | audit, Audit, deny, Deny, disabled, Disabled | 6.1.0 |
Management ports of virtual machines should be protected with just-in-time network access control | Possible network Just In Time (JIT) access will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Only secure connections to your Azure Cache for Redis should be enabled | Audit enabling of only connections via SSL to Azure Cache for Redis. Use of secure connections ensures authentication between the server and the service and protects data in transit from network layer attacks such as man-in-the-middle, eavesdropping, and session-hijacking | Audit, Deny, Disabled | 1.0.0 |
Public network access on Azure SQL Database should be disabled | Disabling the public network access property improves security by ensuring your Azure SQL Database can only be accessed from a private endpoint. This configuration denies all logins that match IP or virtual network based firewall rules. | Audit, Deny, Disabled | 1.1.0 |
Public network access should be disabled for MariaDB servers | Disable the public network access property to improve security and ensure your Azure Database for MariaDB can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for MySQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for MySQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.1.0 |
Public network access should be disabled for MySQL servers | Disable the public network access property to improve security and ensure your Azure Database for MySQL can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for PostgreSQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for PostgreSQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 3.0.1 |
Public network access should be disabled for PostgreSQL servers | Disable the public network access property to improve security and ensure your Azure Database for PostgreSQL can only be accessed from a private endpoint. This configuration disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.1 |
Secure transfer to storage accounts should be enabled | Audit requirement of Secure transfer in your storage account. Secure transfer is an option that forces your storage account to accept requests only from secure connections (HTTPS). Use of HTTPS ensures authentication between the server and the service and protects data in transit from network layer attacks such as man-in-the-middle, eavesdropping, and session-hijacking | Audit, Deny, Disabled | 2.0.0 |
Storage accounts should allow access from trusted Microsoft services | Some Microsoft services that interact with storage accounts operate from networks that can't be granted access through network rules. To help this type of service work as intended, allow the set of trusted Microsoft services to bypass the network rules. These services will then use strong authentication to access the storage account. | Audit, Deny, Disabled | 1.0.0 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Windows machines should be configured to use secure communication protocols | To protect the privacy of information communicated over the Internet, your machines should use the latest version of the industry-standard cryptographic protocol, Transport Layer Security (TLS). TLS secures communications over a network by encrypting a connection between machines. | AuditIfNotExists, Disabled | 4.1.1 |
Windows machines should meet requirements for 'Security Options - Network Access' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Access' for including access for anonymous users, local accounts, and remote access to the registry. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Verify and control/limit connections to and use of external information systems.
ID: CMMC L3 AC.1.003 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: All Internet traffic should be routed via your deployed Azure Firewall | Azure Security Center has identified that some of your subnets aren't protected with a next generation firewall. Protect your subnets from potential threats by restricting access to them with Azure Firewall or a supported next generation firewall | AuditIfNotExists, Disabled | 3.0.0-preview |
Adaptive network hardening recommendations should be applied on internet facing virtual machines | Azure Security Center analyzes the traffic patterns of Internet facing virtual machines and provides Network Security Group rule recommendations that reduce the potential attack surface | AuditIfNotExists, Disabled | 3.0.0 |
Internet-facing virtual machines should be protected with network security groups | Protect your virtual machines from potential threats by restricting access to them with network security groups (NSG). Learn more about controlling traffic with NSGs at https://aka.ms/nsg-doc | AuditIfNotExists, Disabled | 3.0.0 |
Employ the principle of least privilege, including for specific security functions and privileged accounts.
ID: CMMC L3 AC.2.007 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Azure Role-Based Access Control (RBAC) should be used on Kubernetes Services | To provide granular filtering on the actions that users can perform, use Azure Role-Based Access Control (RBAC) to manage permissions in Kubernetes Service Clusters and configure relevant authorization policies. | Audit, Disabled | 1.0.3 |
Guest accounts with read permissions on Azure resources should be removed | External accounts with read privileges should be removed from your subscription in order to prevent unmonitored access. | AuditIfNotExists, Disabled | 1.0.0 |
Guest accounts with write permissions on Azure resources should be removed | External accounts with write privileges should be removed from your subscription in order to prevent unmonitored access. | AuditIfNotExists, Disabled | 1.0.0 |
Management ports of virtual machines should be protected with just-in-time network access control | Possible network Just In Time (JIT) access will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Use non-privileged accounts or roles when accessing nonsecurity functions.
ID: CMMC L3 AC.2.008 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Windows machines should meet requirements for 'Security Options - User Account Control' | Windows machines should have the specified Group Policy settings in the category 'Security Options - User Account Control' for mode for admins, behavior of elevation prompt, and virtualizing file and registry write failures. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Windows machines should meet requirements for 'User Rights Assignment' | Windows machines should have the specified Group Policy settings in the category 'User Rights Assignment' for allowing log on locally, RDP, access from the network, and many other user activities. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Monitor and control remote access sessions.
ID: CMMC L3 AC.2.013 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Add system-assigned managed identity to enable Guest Configuration assignments on virtual machines with no identities | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration but do not have any managed identities. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Add system-assigned managed identity to enable Guest Configuration assignments on VMs with a user-assigned identity | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration and have at least one user-assigned identity but do not have a system-assigned managed identity. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
App Service apps should have remote debugging turned off | Remote debugging requires inbound ports to be opened on an App Service app. Remote debugging should be turned off. | AuditIfNotExists, Disabled | 2.0.0 |
Audit Linux machines that allow remote connections from accounts without passwords | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Linux machines that allow remote connections from accounts without passwords | AuditIfNotExists, Disabled | 3.1.0 |
Deploy the Windows Guest Configuration extension to enable Guest Configuration assignments on Windows VMs | This policy deploys the Windows Guest Configuration extension to Windows virtual machines hosted in Azure that are supported by Guest Configuration. The Windows Guest Configuration extension is a prerequisite for all Windows Guest Configuration assignments and must be deployed to machines before using any Windows Guest Configuration policy definition. For more information on Guest Configuration, visit https://aka.ms/gcpol. | deployIfNotExists | 1.2.0 |
Function apps should have remote debugging turned off | Remote debugging requires inbound ports to be opened on Function apps. Remote debugging should be turned off. | AuditIfNotExists, Disabled | 2.0.0 |
Management ports of virtual machines should be protected with just-in-time network access control | Possible network Just In Time (JIT) access will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Network Watcher should be enabled | Network Watcher is a regional service that enables you to monitor and diagnose conditions at a network scenario level in, to, and from Azure. Scenario level monitoring enables you to diagnose problems at an end to end network level view. It is required to have a network watcher resource group to be created in every region where a virtual network is present. An alert is enabled if a network watcher resource group is not available in a particular region. | AuditIfNotExists, Disabled | 3.0.0 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Windows machines should meet requirements for 'Security Options - Network Security' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Security' for including Local System behavior, PKU2U, LAN Manager, LDAP client, and NTLM SSP. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Control the flow of CUI in accordance with approved authorizations.
ID: CMMC L3 AC.2.016 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: All Internet traffic should be routed via your deployed Azure Firewall | Azure Security Center has identified that some of your subnets aren't protected with a next generation firewall. Protect your subnets from potential threats by restricting access to them with Azure Firewall or a supported next generation firewall | AuditIfNotExists, Disabled | 3.0.0-preview |
[Preview]: Storage account public access should be disallowed | Anonymous public read access to containers and blobs in Azure Storage is a convenient way to share data but might present security risks. To prevent data breaches caused by undesired anonymous access, Microsoft recommends preventing public access to a storage account unless your scenario requires it. | audit, Audit, deny, Deny, disabled, Disabled | 3.1.0-preview |
Adaptive network hardening recommendations should be applied on internet facing virtual machines | Azure Security Center analyzes the traffic patterns of Internet facing virtual machines and provides Network Security Group rule recommendations that reduce the potential attack surface | AuditIfNotExists, Disabled | 3.0.0 |
Azure AI Services resources should restrict network access | By restricting network access, you can ensure that only allowed networks can access the service. This can be achieved by configuring network rules so that only applications from allowed networks can access the Azure AI service. | Audit, Deny, Disabled | 3.2.0 |
Azure Role-Based Access Control (RBAC) should be used on Kubernetes Services | To provide granular filtering on the actions that users can perform, use Azure Role-Based Access Control (RBAC) to manage permissions in Kubernetes Service Clusters and configure relevant authorization policies. | Audit, Disabled | 1.0.3 |
Cognitive Services accounts should disable public network access | To improve the security of Cognitive Services accounts, ensure that it isn't exposed to the public internet and can only be accessed from a private endpoint. Disable the public network access property as described in https://go.microsoft.com/fwlink/?linkid=2129800. This option disables access from any public address space outside the Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. This reduces data leakage risks. | Audit, Deny, Disabled | 3.0.1 |
Container registries should not allow unrestricted network access | Azure container registries by default accept connections over the internet from hosts on any network. To protect your registries from potential threats, allow access from only specific private endpoints, public IP addresses or address ranges. If your registry doesn't have network rules configured, it will appear in the unhealthy resources. Learn more about Container Registry network rules here: https://aka.ms/acr/privatelink, https://aka.ms/acr/portal/public-network and https://aka.ms/acr/vnet. | Audit, Deny, Disabled | 2.0.0 |
CORS should not allow every domain to access your API for FHIR | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your API for FHIR. To protect your API for FHIR, remove access for all domains and explicitly define the domains allowed to connect. | audit, Audit, disabled, Disabled | 1.1.0 |
Function apps should not have CORS configured to allow every resource to access your apps | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your Function app. Allow only required domains to interact with your Function app. | AuditIfNotExists, Disabled | 2.0.0 |
Internet-facing virtual machines should be protected with network security groups | Protect your virtual machines from potential threats by restricting access to them with network security groups (NSG). Learn more about controlling traffic with NSGs at https://aka.ms/nsg-doc | AuditIfNotExists, Disabled | 3.0.0 |
Public network access on Azure SQL Database should be disabled | Disabling the public network access property improves security by ensuring your Azure SQL Database can only be accessed from a private endpoint. This configuration denies all logins that match IP or virtual network based firewall rules. | Audit, Deny, Disabled | 1.1.0 |
Public network access should be disabled for MariaDB servers | Disable the public network access property to improve security and ensure your Azure Database for MariaDB can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for MySQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for MySQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.1.0 |
Public network access should be disabled for MySQL servers | Disable the public network access property to improve security and ensure your Azure Database for MySQL can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for PostgreSQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for PostgreSQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 3.0.1 |
Public network access should be disabled for PostgreSQL servers | Disable the public network access property to improve security and ensure your Azure Database for PostgreSQL can only be accessed from a private endpoint. This configuration disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.1 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Windows machines should meet requirements for 'Security Options - Network Access' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Access' for including access for anonymous users, local accounts, and remote access to the registry. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Separate the duties of individuals to reduce the risk of malevolent activity without collusion.
ID: CMMC L3 AC.3.017 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
A maximum of 3 owners should be designated for your subscription | It is recommended to designate up to 3 subscription owners in order to reduce the potential for breach by a compromised owner. | AuditIfNotExists, Disabled | 3.0.0 |
Audit Windows machines missing any of specified members in the Administrators group | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if the local Administrators group does not contain one or more members that are listed in the policy parameter. | auditIfNotExists | 2.0.0 |
Audit Windows machines that have the specified members in the Administrators group | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if the local Administrators group contains one or more of the members listed in the policy parameter. | auditIfNotExists | 2.0.0 |
There should be more than one owner assigned to your subscription | It is recommended to designate more than one subscription owner in order to have administrator access redundancy. | AuditIfNotExists, Disabled | 3.0.0 |
Prevent non-privileged users from executing privileged functions and capture the execution of such functions in audit logs.
ID: CMMC L3 AC.3.018 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
An activity log alert should exist for specific Administrative operations | This policy audits specific Administrative operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Audit usage of custom RBAC roles | Audit built-in roles such as 'Owner, Contributer, Reader' instead of custom RBAC roles, which are error prone. Using custom roles is treated as an exception and requires a rigorous review and threat modeling | Audit, Disabled | 1.0.1 |
Windows machines should meet requirements for 'System Audit Policies - Privilege Use' | Windows machines should have the specified Group Policy settings in the category 'System Audit Policies - Privilege Use' for auditing nonsensitive and other privilege use. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Authorize remote execution of privileged commands and remote access to security-relevant information.
ID: CMMC L3 AC.3.021 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Add system-assigned managed identity to enable Guest Configuration assignments on virtual machines with no identities | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration but do not have any managed identities. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Add system-assigned managed identity to enable Guest Configuration assignments on VMs with a user-assigned identity | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration and have at least one user-assigned identity but do not have a system-assigned managed identity. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
An activity log alert should exist for specific Administrative operations | This policy audits specific Administrative operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
An activity log alert should exist for specific Security operations | This policy audits specific Security operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Deploy the Linux Guest Configuration extension to enable Guest Configuration assignments on Linux VMs | This policy deploys the Linux Guest Configuration extension to Linux virtual machines hosted in Azure that are supported by Guest Configuration. The Linux Guest Configuration extension is a prerequisite for all Linux Guest Configuration assignments and must be deployed to machines before using any Linux Guest Configuration policy definition. For more information on Guest Configuration, visit https://aka.ms/gcpol. | deployIfNotExists | 3.1.0 |
Deploy the Windows Guest Configuration extension to enable Guest Configuration assignments on Windows VMs | This policy deploys the Windows Guest Configuration extension to Windows virtual machines hosted in Azure that are supported by Guest Configuration. The Windows Guest Configuration extension is a prerequisite for all Windows Guest Configuration assignments and must be deployed to machines before using any Windows Guest Configuration policy definition. For more information on Guest Configuration, visit https://aka.ms/gcpol. | deployIfNotExists | 1.2.0 |
Guest Configuration extension should be installed on your machines | To ensure secure configurations of in-guest settings of your machine, install the Guest Configuration extension. In-guest settings that the extension monitors include the configuration of the operating system, application configuration or presence, and environment settings. Once installed, in-guest policies will be available such as 'Windows Exploit guard should be enabled'. Learn more at https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 1.0.3 |
Virtual machines' Guest Configuration extension should be deployed with system-assigned managed identity | The Guest Configuration extension requires a system assigned managed identity. Azure virtual machines in the scope of this policy will be non-compliant when they have the Guest Configuration extension installed but do not have a system assigned managed identity. Learn more at https://aka.ms/gcpol | AuditIfNotExists, Disabled | 1.0.1 |
Windows machines should meet requirements for 'Security Options - User Account Control' | Windows machines should have the specified Group Policy settings in the category 'Security Options - User Account Control' for mode for admins, behavior of elevation prompt, and virtualizing file and registry write failures. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Windows machines should meet requirements for 'User Rights Assignment' | Windows machines should have the specified Group Policy settings in the category 'User Rights Assignment' for allowing log on locally, RDP, access from the network, and many other user activities. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Audit and Accountability
Ensure that the actions of individual system users can be uniquely traced to those users so they can be held accountable for their actions.
ID: CMMC L3 AU.2.041 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: Log Analytics Extension should be enabled for listed virtual machine images | Reports virtual machines as non-compliant if the virtual machine image is not in the list defined and the extension is not installed. | AuditIfNotExists, Disabled | 2.0.1-preview |
An activity log alert should exist for specific Administrative operations | This policy audits specific Administrative operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
An activity log alert should exist for specific Policy operations | This policy audits specific Policy operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 3.0.0 |
An activity log alert should exist for specific Security operations | This policy audits specific Security operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Audit diagnostic setting for selected resource types | Audit diagnostic setting for selected resource types. Be sure to select only resource types which support diagnostics settings. | AuditIfNotExists | 2.0.1 |
Auditing on SQL server should be enabled | Auditing on your SQL Server should be enabled to track database activities across all databases on the server and save them in an audit log. | AuditIfNotExists, Disabled | 2.0.0 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Monitor log profile should collect logs for categories 'write,' 'delete,' and 'action' | This policy ensures that a log profile collects logs for categories 'write,' 'delete,' and 'action' | AuditIfNotExists, Disabled | 1.0.0 |
Azure Monitor should collect activity logs from all regions | This policy audits the Azure Monitor log profile which does not export activities from all Azure supported regions including global. | AuditIfNotExists, Disabled | 2.0.0 |
Azure subscriptions should have a log profile for Activity Log | This policy ensures if a log profile is enabled for exporting activity logs. It audits if there is no log profile created to export the logs either to a storage account or to an event hub. | AuditIfNotExists, Disabled | 1.0.0 |
Log Analytics extension should be enabled in virtual machine scale sets for listed virtual machine images | Reports virtual machine scale sets as non-compliant if the virtual machine image is not in the list defined and the extension is not installed. | AuditIfNotExists, Disabled | 2.0.1 |
The Log Analytics extension should be installed on Virtual Machine Scale Sets | This policy audits any Windows/Linux Virtual Machine Scale Sets if the Log Analytics extension is not installed. | AuditIfNotExists, Disabled | 1.0.1 |
Virtual machines should be connected to a specified workspace | Reports virtual machines as non-compliant if they aren't logging to the Log Analytics workspace specified in the policy/initiative assignment. | AuditIfNotExists, Disabled | 1.1.0 |
Virtual machines should have the Log Analytics extension installed | This policy audits any Windows/Linux virtual machines if the Log Analytics extension is not installed. | AuditIfNotExists, Disabled | 1.0.1 |
Create and retain system audit logs and records to the extent needed to enable the monitoring, analysis, investigation, and reporting of unlawful or unauthorized system activity.
ID: CMMC L3 AU.2.042 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: Log Analytics Extension should be enabled for listed virtual machine images | Reports virtual machines as non-compliant if the virtual machine image is not in the list defined and the extension is not installed. | AuditIfNotExists, Disabled | 2.0.1-preview |
Activity log should be retained for at least one year | This policy audits the activity log if the retention is not set for 365 days or forever (retention days set to 0). | AuditIfNotExists, Disabled | 1.0.0 |
An activity log alert should exist for specific Administrative operations | This policy audits specific Administrative operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
An activity log alert should exist for specific Policy operations | This policy audits specific Policy operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 3.0.0 |
An activity log alert should exist for specific Security operations | This policy audits specific Security operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Audit diagnostic setting for selected resource types | Audit diagnostic setting for selected resource types. Be sure to select only resource types which support diagnostics settings. | AuditIfNotExists | 2.0.1 |
Auditing on SQL server should be enabled | Auditing on your SQL Server should be enabled to track database activities across all databases on the server and save them in an audit log. | AuditIfNotExists, Disabled | 2.0.0 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Monitor should collect activity logs from all regions | This policy audits the Azure Monitor log profile which does not export activities from all Azure supported regions including global. | AuditIfNotExists, Disabled | 2.0.0 |
Azure subscriptions should have a log profile for Activity Log | This policy ensures if a log profile is enabled for exporting activity logs. It audits if there is no log profile created to export the logs either to a storage account or to an event hub. | AuditIfNotExists, Disabled | 1.0.0 |
Log Analytics extension should be enabled in virtual machine scale sets for listed virtual machine images | Reports virtual machine scale sets as non-compliant if the virtual machine image is not in the list defined and the extension is not installed. | AuditIfNotExists, Disabled | 2.0.1 |
The Log Analytics extension should be installed on Virtual Machine Scale Sets | This policy audits any Windows/Linux Virtual Machine Scale Sets if the Log Analytics extension is not installed. | AuditIfNotExists, Disabled | 1.0.1 |
Virtual machines should be connected to a specified workspace | Reports virtual machines as non-compliant if they aren't logging to the Log Analytics workspace specified in the policy/initiative assignment. | AuditIfNotExists, Disabled | 1.1.0 |
Virtual machines should have the Log Analytics extension installed | This policy audits any Windows/Linux virtual machines if the Log Analytics extension is not installed. | AuditIfNotExists, Disabled | 1.0.1 |
Alert in the event of an audit logging process failure.
ID: CMMC L3 AU.3.046 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: Log Analytics Extension should be enabled for listed virtual machine images | Reports virtual machines as non-compliant if the virtual machine image is not in the list defined and the extension is not installed. | AuditIfNotExists, Disabled | 2.0.1-preview |
Audit diagnostic setting for selected resource types | Audit diagnostic setting for selected resource types. Be sure to select only resource types which support diagnostics settings. | AuditIfNotExists | 2.0.1 |
Auditing on SQL server should be enabled | Auditing on your SQL Server should be enabled to track database activities across all databases on the server and save them in an audit log. | AuditIfNotExists, Disabled | 2.0.0 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Log Analytics extension should be enabled in virtual machine scale sets for listed virtual machine images | Reports virtual machine scale sets as non-compliant if the virtual machine image is not in the list defined and the extension is not installed. | AuditIfNotExists, Disabled | 2.0.1 |
Virtual machines should be connected to a specified workspace | Reports virtual machines as non-compliant if they aren't logging to the Log Analytics workspace specified in the policy/initiative assignment. | AuditIfNotExists, Disabled | 1.1.0 |
Collect audit information (e.g., logs) into one or more central repositories.
ID: CMMC L3 AU.3.048 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: Log Analytics Extension should be enabled for listed virtual machine images | Reports virtual machines as non-compliant if the virtual machine image is not in the list defined and the extension is not installed. | AuditIfNotExists, Disabled | 2.0.1-preview |
App Service apps should have resource logs enabled | Audit enabling of resource logs on the app. This enables you to recreate activity trails for investigation purposes if a security incident occurs or your network is compromised. | AuditIfNotExists, Disabled | 2.0.1 |
Audit diagnostic setting for selected resource types | Audit diagnostic setting for selected resource types. Be sure to select only resource types which support diagnostics settings. | AuditIfNotExists | 2.0.1 |
Log Analytics extension should be enabled in virtual machine scale sets for listed virtual machine images | Reports virtual machine scale sets as non-compliant if the virtual machine image is not in the list defined and the extension is not installed. | AuditIfNotExists, Disabled | 2.0.1 |
Resource logs in IoT Hub should be enabled | Audit enabling of resource logs. This enables you to recreate activity trails to use for investigation purposes; when a security incident occurs or when your network is compromised | AuditIfNotExists, Disabled | 3.1.0 |
The Log Analytics extension should be installed on Virtual Machine Scale Sets | This policy audits any Windows/Linux Virtual Machine Scale Sets if the Log Analytics extension is not installed. | AuditIfNotExists, Disabled | 1.0.1 |
Virtual machines should be connected to a specified workspace | Reports virtual machines as non-compliant if they aren't logging to the Log Analytics workspace specified in the policy/initiative assignment. | AuditIfNotExists, Disabled | 1.1.0 |
Virtual machines should have the Log Analytics extension installed | This policy audits any Windows/Linux virtual machines if the Log Analytics extension is not installed. | AuditIfNotExists, Disabled | 1.0.1 |
Protect audit information and audit logging tools from unauthorized access, modification, and deletion.
ID: CMMC L3 AU.3.049 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
An activity log alert should exist for specific Policy operations | This policy audits specific Policy operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 3.0.0 |
Audit diagnostic setting for selected resource types | Audit diagnostic setting for selected resource types. Be sure to select only resource types which support diagnostics settings. | AuditIfNotExists | 2.0.1 |
Security Assessment
Periodically assess the security controls in organizational systems to determine if the controls are effective in their application.
ID: CMMC L3 CA.2.158 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
A vulnerability assessment solution should be enabled on your virtual machines | Audits virtual machines to detect whether they are running a supported vulnerability assessment solution. A core component of every cyber risk and security program is the identification and analysis of vulnerabilities. Azure Security Center's standard pricing tier includes vulnerability scanning for your virtual machines at no extra cost. Additionally, Security Center can automatically deploy this tool for you. | AuditIfNotExists, Disabled | 3.0.0 |
Adaptive application controls for defining safe applications should be enabled on your machines | Enable application controls to define the list of known-safe applications running on your machines, and alert you when other applications run. This helps harden your machines against malware. To simplify the process of configuring and maintaining your rules, Security Center uses machine learning to analyze the applications running on each machine and suggest the list of known-safe applications. | AuditIfNotExists, Disabled | 3.0.0 |
Allowlist rules in your adaptive application control policy should be updated | Monitor for changes in behavior on groups of machines configured for auditing by Azure Security Center's adaptive application controls. Security Center uses machine learning to analyze the running processes on your machines and suggest a list of known-safe applications. These are presented as recommended apps to allow in adaptive application control policies. | AuditIfNotExists, Disabled | 3.0.0 |
An activity log alert should exist for specific Security operations | This policy audits specific Security operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Auditing on SQL server should be enabled | Auditing on your SQL Server should be enabled to track database activities across all databases on the server and save them in an audit log. | AuditIfNotExists, Disabled | 2.0.0 |
Endpoint protection solution should be installed on virtual machine scale sets | Audit the existence and health of an endpoint protection solution on your virtual machines scale sets, to protect them from threats and vulnerabilities. | AuditIfNotExists, Disabled | 3.0.0 |
Monitor missing Endpoint Protection in Azure Security Center | Servers without an installed Endpoint Protection agent will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Security Center standard pricing tier should be selected | The standard pricing tier enables threat detection for networks and virtual machines, providing threat intelligence, anomaly detection, and behavior analytics in Azure Security Center | Audit, Disabled | 1.1.0 |
Vulnerability assessment should be enabled on SQL Managed Instance | Audit each SQL Managed Instance which doesn't have recurring vulnerability assessment scans enabled. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 1.0.1 |
Vulnerability assessment should be enabled on your SQL servers | Audit Azure SQL servers which do not have vulnerability assessment properly configured. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 3.0.0 |
Monitor security controls on an ongoing basis to ensure the continued effectiveness of the controls.
ID: CMMC L3 CA.3.161 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
A vulnerability assessment solution should be enabled on your virtual machines | Audits virtual machines to detect whether they are running a supported vulnerability assessment solution. A core component of every cyber risk and security program is the identification and analysis of vulnerabilities. Azure Security Center's standard pricing tier includes vulnerability scanning for your virtual machines at no extra cost. Additionally, Security Center can automatically deploy this tool for you. | AuditIfNotExists, Disabled | 3.0.0 |
Adaptive application controls for defining safe applications should be enabled on your machines | Enable application controls to define the list of known-safe applications running on your machines, and alert you when other applications run. This helps harden your machines against malware. To simplify the process of configuring and maintaining your rules, Security Center uses machine learning to analyze the applications running on each machine and suggest the list of known-safe applications. | AuditIfNotExists, Disabled | 3.0.0 |
Allowlist rules in your adaptive application control policy should be updated | Monitor for changes in behavior on groups of machines configured for auditing by Azure Security Center's adaptive application controls. Security Center uses machine learning to analyze the running processes on your machines and suggest a list of known-safe applications. These are presented as recommended apps to allow in adaptive application control policies. | AuditIfNotExists, Disabled | 3.0.0 |
An activity log alert should exist for specific Security operations | This policy audits specific Security operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Auditing on SQL server should be enabled | Auditing on your SQL Server should be enabled to track database activities across all databases on the server and save them in an audit log. | AuditIfNotExists, Disabled | 2.0.0 |
Endpoint protection solution should be installed on virtual machine scale sets | Audit the existence and health of an endpoint protection solution on your virtual machines scale sets, to protect them from threats and vulnerabilities. | AuditIfNotExists, Disabled | 3.0.0 |
Monitor missing Endpoint Protection in Azure Security Center | Servers without an installed Endpoint Protection agent will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Security Center standard pricing tier should be selected | The standard pricing tier enables threat detection for networks and virtual machines, providing threat intelligence, anomaly detection, and behavior analytics in Azure Security Center | Audit, Disabled | 1.1.0 |
Vulnerability assessment should be enabled on SQL Managed Instance | Audit each SQL Managed Instance which doesn't have recurring vulnerability assessment scans enabled. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 1.0.1 |
Vulnerability assessment should be enabled on your SQL servers | Audit Azure SQL servers which do not have vulnerability assessment properly configured. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 3.0.0 |
Configuration Management
Establish and maintain baseline configurations and inventories of organizational systems (including hardware, software, firmware, and documentation) throughout the respective system development life cycles.
ID: CMMC L3 CM.2.061 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Adaptive application controls for defining safe applications should be enabled on your machines | Enable application controls to define the list of known-safe applications running on your machines, and alert you when other applications run. This helps harden your machines against malware. To simplify the process of configuring and maintaining your rules, Security Center uses machine learning to analyze the applications running on each machine and suggest the list of known-safe applications. | AuditIfNotExists, Disabled | 3.0.0 |
An activity log alert should exist for specific Policy operations | This policy audits specific Policy operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 3.0.0 |
Linux machines should meet requirements for the Azure compute security baseline | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if the machine is not configured correctly for one of the recommendations in the Azure compute security baseline. | AuditIfNotExists, Disabled | 2.2.0 |
Employ the principle of least functionality by configuring organizational systems to provide only essential capabilities.
ID: CMMC L3 CM.2.062 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Azure Role-Based Access Control (RBAC) should be used on Kubernetes Services | To provide granular filtering on the actions that users can perform, use Azure Role-Based Access Control (RBAC) to manage permissions in Kubernetes Service Clusters and configure relevant authorization policies. | Audit, Disabled | 1.0.3 |
Windows machines should meet requirements for 'System Audit Policies - Privilege Use' | Windows machines should have the specified Group Policy settings in the category 'System Audit Policies - Privilege Use' for auditing nonsensitive and other privilege use. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Control and monitor user-installed software.
ID: CMMC L3 CM.2.063 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Adaptive application controls for defining safe applications should be enabled on your machines | Enable application controls to define the list of known-safe applications running on your machines, and alert you when other applications run. This helps harden your machines against malware. To simplify the process of configuring and maintaining your rules, Security Center uses machine learning to analyze the applications running on each machine and suggest the list of known-safe applications. | AuditIfNotExists, Disabled | 3.0.0 |
Allowlist rules in your adaptive application control policy should be updated | Monitor for changes in behavior on groups of machines configured for auditing by Azure Security Center's adaptive application controls. Security Center uses machine learning to analyze the running processes on your machines and suggest a list of known-safe applications. These are presented as recommended apps to allow in adaptive application control policies. | AuditIfNotExists, Disabled | 3.0.0 |
Security Center standard pricing tier should be selected | The standard pricing tier enables threat detection for networks and virtual machines, providing threat intelligence, anomaly detection, and behavior analytics in Azure Security Center | Audit, Disabled | 1.1.0 |
Windows machines should meet requirements for 'Security Options - User Account Control' | Windows machines should have the specified Group Policy settings in the category 'Security Options - User Account Control' for mode for admins, behavior of elevation prompt, and virtualizing file and registry write failures. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Establish and enforce security configuration settings for information technology products employed in organizational systems.
ID: CMMC L3 CM.2.064 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: All Internet traffic should be routed via your deployed Azure Firewall | Azure Security Center has identified that some of your subnets aren't protected with a next generation firewall. Protect your subnets from potential threats by restricting access to them with Azure Firewall or a supported next generation firewall | AuditIfNotExists, Disabled | 3.0.0-preview |
All network ports should be restricted on network security groups associated to your virtual machine | Azure Security Center has identified some of your network security groups' inbound rules to be too permissive. Inbound rules should not allow access from 'Any' or 'Internet' ranges. This can potentially enable attackers to target your resources. | AuditIfNotExists, Disabled | 3.0.0 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Key Vault should have firewall enabled | Enable the key vault firewall so that the key vault is not accessible by default to any public IPs. Optionally, you can configure specific IP ranges to limit access to those networks. Learn more at: https://docs.microsoft.com/azure/key-vault/general/network-security | Audit, Deny, Disabled | 3.2.1 |
Azure Web Application Firewall should be enabled for Azure Front Door entry-points | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 1.0.2 |
Web Application Firewall (WAF) should be enabled for Application Gateway | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 2.0.0 |
Web Application Firewall (WAF) should use the specified mode for Application Gateway | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Application Gateway. | Audit, Deny, Disabled | 1.0.0 |
Web Application Firewall (WAF) should use the specified mode for Azure Front Door Service | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Azure Front Door Service. | Audit, Deny, Disabled | 1.0.0 |
Windows machines should meet requirements for 'Security Options - Network Security' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Security' for including Local System behavior, PKU2U, LAN Manager, LDAP client, and NTLM SSP. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Track, review, approve or disapprove, and log changes to organizational systems.
ID: CMMC L3 CM.2.065 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
An activity log alert should exist for specific Administrative operations | This policy audits specific Administrative operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
An activity log alert should exist for specific Policy operations | This policy audits specific Policy operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 3.0.0 |
An activity log alert should exist for specific Security operations | This policy audits specific Security operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Azure Monitor should collect activity logs from all regions | This policy audits the Azure Monitor log profile which does not export activities from all Azure supported regions including global. | AuditIfNotExists, Disabled | 2.0.0 |
Azure subscriptions should have a log profile for Activity Log | This policy ensures if a log profile is enabled for exporting activity logs. It audits if there is no log profile created to export the logs either to a storage account or to an event hub. | AuditIfNotExists, Disabled | 1.0.0 |
Windows machines should meet requirements for 'System Audit Policies - Policy Change' | Windows machines should have the specified Group Policy settings in the category 'System Audit Policies - Policy Change' for auditing changes to system audit policies. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Restrict, disable, or prevent the use of nonessential programs, functions, ports, protocols, and services.
ID: CMMC L3 CM.3.068 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: Storage account public access should be disallowed | Anonymous public read access to containers and blobs in Azure Storage is a convenient way to share data but might present security risks. To prevent data breaches caused by undesired anonymous access, Microsoft recommends preventing public access to a storage account unless your scenario requires it. | audit, Audit, deny, Deny, disabled, Disabled | 3.1.0-preview |
Adaptive application controls for defining safe applications should be enabled on your machines | Enable application controls to define the list of known-safe applications running on your machines, and alert you when other applications run. This helps harden your machines against malware. To simplify the process of configuring and maintaining your rules, Security Center uses machine learning to analyze the applications running on each machine and suggest the list of known-safe applications. | AuditIfNotExists, Disabled | 3.0.0 |
Adaptive network hardening recommendations should be applied on internet facing virtual machines | Azure Security Center analyzes the traffic patterns of Internet facing virtual machines and provides Network Security Group rule recommendations that reduce the potential attack surface | AuditIfNotExists, Disabled | 3.0.0 |
All network ports should be restricted on network security groups associated to your virtual machine | Azure Security Center has identified some of your network security groups' inbound rules to be too permissive. Inbound rules should not allow access from 'Any' or 'Internet' ranges. This can potentially enable attackers to target your resources. | AuditIfNotExists, Disabled | 3.0.0 |
Allowlist rules in your adaptive application control policy should be updated | Monitor for changes in behavior on groups of machines configured for auditing by Azure Security Center's adaptive application controls. Security Center uses machine learning to analyze the running processes on your machines and suggest a list of known-safe applications. These are presented as recommended apps to allow in adaptive application control policies. | AuditIfNotExists, Disabled | 3.0.0 |
App Service apps should have remote debugging turned off | Remote debugging requires inbound ports to be opened on an App Service app. Remote debugging should be turned off. | AuditIfNotExists, Disabled | 2.0.0 |
App Service apps should not have CORS configured to allow every resource to access your apps | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your app. Allow only required domains to interact with your app. | AuditIfNotExists, Disabled | 2.0.0 |
Azure AI Services resources should restrict network access | By restricting network access, you can ensure that only allowed networks can access the service. This can be achieved by configuring network rules so that only applications from allowed networks can access the Azure AI service. | Audit, Deny, Disabled | 3.2.0 |
Cognitive Services accounts should disable public network access | To improve the security of Cognitive Services accounts, ensure that it isn't exposed to the public internet and can only be accessed from a private endpoint. Disable the public network access property as described in https://go.microsoft.com/fwlink/?linkid=2129800. This option disables access from any public address space outside the Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. This reduces data leakage risks. | Audit, Deny, Disabled | 3.0.1 |
Container registries should not allow unrestricted network access | Azure container registries by default accept connections over the internet from hosts on any network. To protect your registries from potential threats, allow access from only specific private endpoints, public IP addresses or address ranges. If your registry doesn't have network rules configured, it will appear in the unhealthy resources. Learn more about Container Registry network rules here: https://aka.ms/acr/privatelink, https://aka.ms/acr/portal/public-network and https://aka.ms/acr/vnet. | Audit, Deny, Disabled | 2.0.0 |
CORS should not allow every domain to access your API for FHIR | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your API for FHIR. To protect your API for FHIR, remove access for all domains and explicitly define the domains allowed to connect. | audit, Audit, disabled, Disabled | 1.1.0 |
Function apps should have remote debugging turned off | Remote debugging requires inbound ports to be opened on Function apps. Remote debugging should be turned off. | AuditIfNotExists, Disabled | 2.0.0 |
Function apps should not have CORS configured to allow every resource to access your apps | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your Function app. Allow only required domains to interact with your Function app. | AuditIfNotExists, Disabled | 2.0.0 |
Internet-facing virtual machines should be protected with network security groups | Protect your virtual machines from potential threats by restricting access to them with network security groups (NSG). Learn more about controlling traffic with NSGs at https://aka.ms/nsg-doc | AuditIfNotExists, Disabled | 3.0.0 |
Kubernetes cluster pods should only use approved host network and port range | Restrict pod access to the host network and the allowable host port range in a Kubernetes cluster. This recommendation is part of CIS 5.2.4 which is intended to improve the security of your Kubernetes environments. This policy is generally available for Kubernetes Service (AKS), and preview for Azure Arc enabled Kubernetes. For more information, see https://aka.ms/kubepolicydoc. | audit, Audit, deny, Deny, disabled, Disabled | 6.1.0 |
Management ports of virtual machines should be protected with just-in-time network access control | Possible network Just In Time (JIT) access will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Non-internet-facing virtual machines should be protected with network security groups | Protect your non-internet-facing virtual machines from potential threats by restricting access with network security groups (NSG). Learn more about controlling traffic with NSGs at https://aka.ms/nsg-doc | AuditIfNotExists, Disabled | 3.0.0 |
Public network access on Azure SQL Database should be disabled | Disabling the public network access property improves security by ensuring your Azure SQL Database can only be accessed from a private endpoint. This configuration denies all logins that match IP or virtual network based firewall rules. | Audit, Deny, Disabled | 1.1.0 |
Public network access should be disabled for MariaDB servers | Disable the public network access property to improve security and ensure your Azure Database for MariaDB can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for MySQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for MySQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.1.0 |
Public network access should be disabled for MySQL servers | Disable the public network access property to improve security and ensure your Azure Database for MySQL can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for PostgreSQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for PostgreSQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 3.0.1 |
Public network access should be disabled for PostgreSQL servers | Disable the public network access property to improve security and ensure your Azure Database for PostgreSQL can only be accessed from a private endpoint. This configuration disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.1 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Subnets should be associated with a Network Security Group | Protect your subnet from potential threats by restricting access to it with a Network Security Group (NSG). NSGs contain a list of Access Control List (ACL) rules that allow or deny network traffic to your subnet. | AuditIfNotExists, Disabled | 3.0.0 |
Apply deny-by-exception (blacklisting) policy to prevent the use of unauthorized software or deny-all, permit-by-exception (whitelisting) policy to allow the execution of authorized software.
ID: CMMC L3 CM.3.069 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Adaptive application controls for defining safe applications should be enabled on your machines | Enable application controls to define the list of known-safe applications running on your machines, and alert you when other applications run. This helps harden your machines against malware. To simplify the process of configuring and maintaining your rules, Security Center uses machine learning to analyze the applications running on each machine and suggest the list of known-safe applications. | AuditIfNotExists, Disabled | 3.0.0 |
Identification and Authentication
Authenticate (or verify) the identities of those users, processes, or devices, as a prerequisite to allowing access to organizational information systems.
ID: CMMC L3 IA.1.077 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Accounts with owner permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with owner permissions to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Accounts with read permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with read privileges to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Accounts with write permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with write privileges to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Add system-assigned managed identity to enable Guest Configuration assignments on virtual machines with no identities | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration but do not have any managed identities. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Add system-assigned managed identity to enable Guest Configuration assignments on VMs with a user-assigned identity | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration and have at least one user-assigned identity but do not have a system-assigned managed identity. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Audit Linux machines that do not have the passwd file permissions set to 0644 | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Linux machines that do not have the passwd file permissions set to 0644 | AuditIfNotExists, Disabled | 3.1.0 |
Audit Linux machines that have accounts without passwords | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Linux machines that have accounts without passwords | AuditIfNotExists, Disabled | 3.1.0 |
Deploy the Windows Guest Configuration extension to enable Guest Configuration assignments on Windows VMs | This policy deploys the Windows Guest Configuration extension to Windows virtual machines hosted in Azure that are supported by Guest Configuration. The Windows Guest Configuration extension is a prerequisite for all Windows Guest Configuration assignments and must be deployed to machines before using any Windows Guest Configuration policy definition. For more information on Guest Configuration, visit https://aka.ms/gcpol. | deployIfNotExists | 1.2.0 |
Windows machines should meet requirements for 'Security Options - Network Security' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Security' for including Local System behavior, PKU2U, LAN Manager, LDAP client, and NTLM SSP. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Enforce a minimum password complexity and change of characters when new passwords are created.
ID: CMMC L3 IA.2.078 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Add system-assigned managed identity to enable Guest Configuration assignments on virtual machines with no identities | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration but do not have any managed identities. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Add system-assigned managed identity to enable Guest Configuration assignments on VMs with a user-assigned identity | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration and have at least one user-assigned identity but do not have a system-assigned managed identity. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Audit Linux machines that have accounts without passwords | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Linux machines that have accounts without passwords | AuditIfNotExists, Disabled | 3.1.0 |
Audit Windows machines that do not have the password complexity setting enabled | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Windows machines that do not have the password complexity setting enabled | AuditIfNotExists, Disabled | 2.0.0 |
Audit Windows machines that do not restrict the minimum password length to specified number of characters | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Windows machines that do not restrict the minimum password length to specified number of characters. Default value for minimum password length is 14 characters | AuditIfNotExists, Disabled | 2.1.0 |
Deploy the Windows Guest Configuration extension to enable Guest Configuration assignments on Windows VMs | This policy deploys the Windows Guest Configuration extension to Windows virtual machines hosted in Azure that are supported by Guest Configuration. The Windows Guest Configuration extension is a prerequisite for all Windows Guest Configuration assignments and must be deployed to machines before using any Windows Guest Configuration policy definition. For more information on Guest Configuration, visit https://aka.ms/gcpol. | deployIfNotExists | 1.2.0 |
Windows machines should meet requirements for 'Security Options - Network Security' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Security' for including Local System behavior, PKU2U, LAN Manager, LDAP client, and NTLM SSP. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Prohibit password reuse for a specified number of generations.
ID: CMMC L3 IA.2.079 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Add system-assigned managed identity to enable Guest Configuration assignments on virtual machines with no identities | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration but do not have any managed identities. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Add system-assigned managed identity to enable Guest Configuration assignments on VMs with a user-assigned identity | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration and have at least one user-assigned identity but do not have a system-assigned managed identity. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Audit Windows machines that allow re-use of the passwords after the specified number of unique passwords | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Windows machines that allow re-use of the passwords after the specified number of unique passwords. Default value for unique passwords is 24 | AuditIfNotExists, Disabled | 2.1.0 |
Deploy the Windows Guest Configuration extension to enable Guest Configuration assignments on Windows VMs | This policy deploys the Windows Guest Configuration extension to Windows virtual machines hosted in Azure that are supported by Guest Configuration. The Windows Guest Configuration extension is a prerequisite for all Windows Guest Configuration assignments and must be deployed to machines before using any Windows Guest Configuration policy definition. For more information on Guest Configuration, visit https://aka.ms/gcpol. | deployIfNotExists | 1.2.0 |
Windows machines should meet requirements for 'Security Options - Network Security' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Security' for including Local System behavior, PKU2U, LAN Manager, LDAP client, and NTLM SSP. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Store and transmit only cryptographically-protected passwords.
ID: CMMC L3 IA.2.081 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Add system-assigned managed identity to enable Guest Configuration assignments on virtual machines with no identities | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration but do not have any managed identities. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Add system-assigned managed identity to enable Guest Configuration assignments on VMs with a user-assigned identity | This policy adds a system-assigned managed identity to virtual machines hosted in Azure that are supported by Guest Configuration and have at least one user-assigned identity but do not have a system-assigned managed identity. A system-assigned managed identity is a prerequisite for all Guest Configuration assignments and must be added to machines before using any Guest Configuration policy definitions. For more information on Guest Configuration, visit https://aka.ms/gcpol. | modify | 4.1.0 |
Audit Windows machines that do not store passwords using reversible encryption | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Windows machines that do not store passwords using reversible encryption | AuditIfNotExists, Disabled | 2.0.0 |
Deploy the Windows Guest Configuration extension to enable Guest Configuration assignments on Windows VMs | This policy deploys the Windows Guest Configuration extension to Windows virtual machines hosted in Azure that are supported by Guest Configuration. The Windows Guest Configuration extension is a prerequisite for all Windows Guest Configuration assignments and must be deployed to machines before using any Windows Guest Configuration policy definition. For more information on Guest Configuration, visit https://aka.ms/gcpol. | deployIfNotExists | 1.2.0 |
Windows machines should meet requirements for 'Security Options - Network Security' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Security' for including Local System behavior, PKU2U, LAN Manager, LDAP client, and NTLM SSP. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Use multifactor authentication for local and network access to privileged accounts and for network access to non-privileged accounts.
ID: CMMC L3 IA.3.083 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Accounts with owner permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with owner permissions to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Accounts with read permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with read privileges to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Accounts with write permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with write privileges to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Employ replay-resistant authentication mechanisms for network access to privileged and nonprivileged accounts.
ID: CMMC L3 IA.3.084 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Accounts with owner permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with owner permissions to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Accounts with read permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with read privileges to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Accounts with write permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with write privileges to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
App Service apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 4.0.0 |
App Service apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for App Service apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Function apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 5.0.0 |
Function apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for Function apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Windows machines should be configured to use secure communication protocols | To protect the privacy of information communicated over the Internet, your machines should use the latest version of the industry-standard cryptographic protocol, Transport Layer Security (TLS). TLS secures communications over a network by encrypting a connection between machines. | AuditIfNotExists, Disabled | 4.1.1 |
Incident Response
Establish an operational incident-handling capability for organizational systems that includes preparation, detection, analysis, containment, recovery, and user response activities.
ID: CMMC L3 IR.2.092 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Email notification for high severity alerts should be enabled | To ensure the relevant people in your organization are notified when there is a potential security breach in one of your subscriptions, enable email notifications for high severity alerts in Security Center. | AuditIfNotExists, Disabled | 1.0.1 |
Email notification to subscription owner for high severity alerts should be enabled | To ensure your subscription owners are notified when there is a potential security breach in their subscription, set email notifications to subscription owners for high severity alerts in Security Center. | AuditIfNotExists, Disabled | 2.0.0 |
Subscriptions should have a contact email address for security issues | To ensure the relevant people in your organization are notified when there is a potential security breach in one of your subscriptions, set a security contact to receive email notifications from Security Center. | AuditIfNotExists, Disabled | 1.0.1 |
Detect and report events.
ID: CMMC L3 IR.2.093 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: All Internet traffic should be routed via your deployed Azure Firewall | Azure Security Center has identified that some of your subnets aren't protected with a next generation firewall. Protect your subnets from potential threats by restricting access to them with Azure Firewall or a supported next generation firewall | AuditIfNotExists, Disabled | 3.0.0-preview |
An activity log alert should exist for specific Security operations | This policy audits specific Security operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Azure Defender for App Service should be enabled | Azure Defender for App Service leverages the scale of the cloud, and the visibility that Azure has as a cloud provider, to monitor for common web app attacks. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for Azure SQL Database servers should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for Key Vault should be enabled | Azure Defender for Key Vault provides an additional layer of protection and security intelligence by detecting unusual and potentially harmful attempts to access or exploit key vault accounts. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for servers should be enabled | Azure Defender for servers provides real-time threat protection for server workloads and generates hardening recommendations as well as alerts about suspicious activities. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for SQL servers on machines should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Key Vault should have firewall enabled | Enable the key vault firewall so that the key vault is not accessible by default to any public IPs. Optionally, you can configure specific IP ranges to limit access to those networks. Learn more at: https://docs.microsoft.com/azure/key-vault/general/network-security | Audit, Deny, Disabled | 3.2.1 |
Azure Web Application Firewall should be enabled for Azure Front Door entry-points | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 1.0.2 |
Deploy Advanced Threat Protection for Cosmos DB Accounts | This policy enables Advanced Threat Protection across Cosmos DB accounts. | DeployIfNotExists, Disabled | 1.0.0 |
Deploy Defender for Storage (Classic) on storage accounts | This policy enables Defender for Storage (Classic) on storage accounts. | DeployIfNotExists, Disabled | 1.0.1 |
Email notification for high severity alerts should be enabled | To ensure the relevant people in your organization are notified when there is a potential security breach in one of your subscriptions, enable email notifications for high severity alerts in Security Center. | AuditIfNotExists, Disabled | 1.0.1 |
Flow logs should be configured for every network security group | Audit for network security groups to verify if flow logs are configured. Enabling flow logs allows to log information about IP traffic flowing through network security group. It can be used for optimizing network flows, monitoring throughput, verifying compliance, detecting intrusions and more. | Audit, Disabled | 1.1.0 |
Microsoft Defender for Containers should be enabled | Microsoft Defender for Containers provides hardening, vulnerability assessment and run-time protections for your Azure, hybrid, and multi-cloud Kubernetes environments. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft Defender for Storage should be enabled | Microsoft Defender for Storage detects potential threats to your storage accounts. It helps prevent the three major impacts on your data and workload: malicious file uploads, sensitive data exfiltration, and data corruption. The new Defender for Storage plan includes Malware Scanning and Sensitive Data Threat Detection. This plan also provides a predictable pricing structure (per storage account) for control over coverage and costs. | AuditIfNotExists, Disabled | 1.0.0 |
Monitor missing Endpoint Protection in Azure Security Center | Servers without an installed Endpoint Protection agent will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Web Application Firewall (WAF) should be enabled for Application Gateway | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 2.0.0 |
Web Application Firewall (WAF) should use the specified mode for Application Gateway | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Application Gateway. | Audit, Deny, Disabled | 1.0.0 |
Web Application Firewall (WAF) should use the specified mode for Azure Front Door Service | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Azure Front Door Service. | Audit, Deny, Disabled | 1.0.0 |
Recovery
Regularly perform and test data back-ups.
ID: CMMC L3 RE.2.137 Ownership: Customer
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Audit virtual machines without disaster recovery configured | Audit virtual machines which do not have disaster recovery configured. To learn more about disaster recovery, visit https://aka.ms/asr-doc. | auditIfNotExists | 1.0.0 |
Azure Backup should be enabled for Virtual Machines | Ensure protection of your Azure Virtual Machines by enabling Azure Backup. Azure Backup is a secure and cost effective data protection solution for Azure. | AuditIfNotExists, Disabled | 3.0.0 |
Geo-redundant backup should be enabled for Azure Database for MariaDB | Azure Database for MariaDB allows you to choose the redundancy option for your database server. It can be set to a geo-redundant backup storage in which the data is not only stored within the region in which your server is hosted, but is also replicated to a paired region to provide recovery option in case of a region failure. Configuring geo-redundant storage for backup is only allowed during server create. | Audit, Disabled | 1.0.1 |
Geo-redundant backup should be enabled for Azure Database for MySQL | Azure Database for MySQL allows you to choose the redundancy option for your database server. It can be set to a geo-redundant backup storage in which the data is not only stored within the region in which your server is hosted, but is also replicated to a paired region to provide recovery option in case of a region failure. Configuring geo-redundant storage for backup is only allowed during server create. | Audit, Disabled | 1.0.1 |
Geo-redundant backup should be enabled for Azure Database for PostgreSQL | Azure Database for PostgreSQL allows you to choose the redundancy option for your database server. It can be set to a geo-redundant backup storage in which the data is not only stored within the region in which your server is hosted, but is also replicated to a paired region to provide recovery option in case of a region failure. Configuring geo-redundant storage for backup is only allowed during server create. | Audit, Disabled | 1.0.1 |
Long-term geo-redundant backup should be enabled for Azure SQL Databases | This policy audits any Azure SQL Database with long-term geo-redundant backup not enabled. | AuditIfNotExists, Disabled | 2.0.0 |
Regularly perform complete, comprehensive and resilient data backups as organizationally-defined.
ID: CMMC L3 RE.3.139 Ownership: Customer
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Audit virtual machines without disaster recovery configured | Audit virtual machines which do not have disaster recovery configured. To learn more about disaster recovery, visit https://aka.ms/asr-doc. | auditIfNotExists | 1.0.0 |
Azure Backup should be enabled for Virtual Machines | Ensure protection of your Azure Virtual Machines by enabling Azure Backup. Azure Backup is a secure and cost effective data protection solution for Azure. | AuditIfNotExists, Disabled | 3.0.0 |
Geo-redundant backup should be enabled for Azure Database for MariaDB | Azure Database for MariaDB allows you to choose the redundancy option for your database server. It can be set to a geo-redundant backup storage in which the data is not only stored within the region in which your server is hosted, but is also replicated to a paired region to provide recovery option in case of a region failure. Configuring geo-redundant storage for backup is only allowed during server create. | Audit, Disabled | 1.0.1 |
Geo-redundant backup should be enabled for Azure Database for MySQL | Azure Database for MySQL allows you to choose the redundancy option for your database server. It can be set to a geo-redundant backup storage in which the data is not only stored within the region in which your server is hosted, but is also replicated to a paired region to provide recovery option in case of a region failure. Configuring geo-redundant storage for backup is only allowed during server create. | Audit, Disabled | 1.0.1 |
Geo-redundant backup should be enabled for Azure Database for PostgreSQL | Azure Database for PostgreSQL allows you to choose the redundancy option for your database server. It can be set to a geo-redundant backup storage in which the data is not only stored within the region in which your server is hosted, but is also replicated to a paired region to provide recovery option in case of a region failure. Configuring geo-redundant storage for backup is only allowed during server create. | Audit, Disabled | 1.0.1 |
Long-term geo-redundant backup should be enabled for Azure SQL Databases | This policy audits any Azure SQL Database with long-term geo-redundant backup not enabled. | AuditIfNotExists, Disabled | 2.0.0 |
Risk Assessment
Periodically assess the risk to organizational operations (including mission, functions, image, or reputation), organizational assets, and individuals, resulting from the operation of organizational systems and the associated processing, storage, or transmission of CUI.
ID: CMMC L3 RM.2.141 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
A vulnerability assessment solution should be enabled on your virtual machines | Audits virtual machines to detect whether they are running a supported vulnerability assessment solution. A core component of every cyber risk and security program is the identification and analysis of vulnerabilities. Azure Security Center's standard pricing tier includes vulnerability scanning for your virtual machines at no extra cost. Additionally, Security Center can automatically deploy this tool for you. | AuditIfNotExists, Disabled | 3.0.0 |
Azure Defender for App Service should be enabled | Azure Defender for App Service leverages the scale of the cloud, and the visibility that Azure has as a cloud provider, to monitor for common web app attacks. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for Azure SQL Database servers should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for Key Vault should be enabled | Azure Defender for Key Vault provides an additional layer of protection and security intelligence by detecting unusual and potentially harmful attempts to access or exploit key vault accounts. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for servers should be enabled | Azure Defender for servers provides real-time threat protection for server workloads and generates hardening recommendations as well as alerts about suspicious activities. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for SQL servers on machines should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Microsoft Defender for Containers should be enabled | Microsoft Defender for Containers provides hardening, vulnerability assessment and run-time protections for your Azure, hybrid, and multi-cloud Kubernetes environments. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft Defender for Storage should be enabled | Microsoft Defender for Storage detects potential threats to your storage accounts. It helps prevent the three major impacts on your data and workload: malicious file uploads, sensitive data exfiltration, and data corruption. The new Defender for Storage plan includes Malware Scanning and Sensitive Data Threat Detection. This plan also provides a predictable pricing structure (per storage account) for control over coverage and costs. | AuditIfNotExists, Disabled | 1.0.0 |
Security Center standard pricing tier should be selected | The standard pricing tier enables threat detection for networks and virtual machines, providing threat intelligence, anomaly detection, and behavior analytics in Azure Security Center | Audit, Disabled | 1.1.0 |
Vulnerability assessment should be enabled on SQL Managed Instance | Audit each SQL Managed Instance which doesn't have recurring vulnerability assessment scans enabled. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 1.0.1 |
Vulnerability assessment should be enabled on your SQL servers | Audit Azure SQL servers which do not have vulnerability assessment properly configured. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 3.0.0 |
Scan for vulnerabilities in organizational systems and applications periodically and when new vulnerabilities affecting those systems and applications are identified.
ID: CMMC L3 RM.2.142 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
A vulnerability assessment solution should be enabled on your virtual machines | Audits virtual machines to detect whether they are running a supported vulnerability assessment solution. A core component of every cyber risk and security program is the identification and analysis of vulnerabilities. Azure Security Center's standard pricing tier includes vulnerability scanning for your virtual machines at no extra cost. Additionally, Security Center can automatically deploy this tool for you. | AuditIfNotExists, Disabled | 3.0.0 |
Azure Defender for App Service should be enabled | Azure Defender for App Service leverages the scale of the cloud, and the visibility that Azure has as a cloud provider, to monitor for common web app attacks. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for Azure SQL Database servers should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for Key Vault should be enabled | Azure Defender for Key Vault provides an additional layer of protection and security intelligence by detecting unusual and potentially harmful attempts to access or exploit key vault accounts. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for servers should be enabled | Azure Defender for servers provides real-time threat protection for server workloads and generates hardening recommendations as well as alerts about suspicious activities. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for SQL servers on machines should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Microsoft Defender for Containers should be enabled | Microsoft Defender for Containers provides hardening, vulnerability assessment and run-time protections for your Azure, hybrid, and multi-cloud Kubernetes environments. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft Defender for Storage should be enabled | Microsoft Defender for Storage detects potential threats to your storage accounts. It helps prevent the three major impacts on your data and workload: malicious file uploads, sensitive data exfiltration, and data corruption. The new Defender for Storage plan includes Malware Scanning and Sensitive Data Threat Detection. This plan also provides a predictable pricing structure (per storage account) for control over coverage and costs. | AuditIfNotExists, Disabled | 1.0.0 |
Security Center standard pricing tier should be selected | The standard pricing tier enables threat detection for networks and virtual machines, providing threat intelligence, anomaly detection, and behavior analytics in Azure Security Center | Audit, Disabled | 1.1.0 |
Vulnerability assessment should be enabled on SQL Managed Instance | Audit each SQL Managed Instance which doesn't have recurring vulnerability assessment scans enabled. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 1.0.1 |
Vulnerability assessment should be enabled on your SQL servers | Audit Azure SQL servers which do not have vulnerability assessment properly configured. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 3.0.0 |
Remediate vulnerabilities in accordance with risk assessments.
ID: CMMC L3 RM.2.143 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
A vulnerability assessment solution should be enabled on your virtual machines | Audits virtual machines to detect whether they are running a supported vulnerability assessment solution. A core component of every cyber risk and security program is the identification and analysis of vulnerabilities. Azure Security Center's standard pricing tier includes vulnerability scanning for your virtual machines at no extra cost. Additionally, Security Center can automatically deploy this tool for you. | AuditIfNotExists, Disabled | 3.0.0 |
Azure Defender for App Service should be enabled | Azure Defender for App Service leverages the scale of the cloud, and the visibility that Azure has as a cloud provider, to monitor for common web app attacks. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for Azure SQL Database servers should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for Key Vault should be enabled | Azure Defender for Key Vault provides an additional layer of protection and security intelligence by detecting unusual and potentially harmful attempts to access or exploit key vault accounts. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for servers should be enabled | Azure Defender for servers provides real-time threat protection for server workloads and generates hardening recommendations as well as alerts about suspicious activities. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for SQL servers on machines should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Kubernetes Services should be upgraded to a non-vulnerable Kubernetes version | Upgrade your Kubernetes service cluster to a later Kubernetes version to protect against known vulnerabilities in your current Kubernetes version. Vulnerability CVE-2019-9946 has been patched in Kubernetes versions 1.11.9+, 1.12.7+, 1.13.5+, and 1.14.0+ | Audit, Disabled | 1.0.2 |
Microsoft Defender for Containers should be enabled | Microsoft Defender for Containers provides hardening, vulnerability assessment and run-time protections for your Azure, hybrid, and multi-cloud Kubernetes environments. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft Defender for Storage should be enabled | Microsoft Defender for Storage detects potential threats to your storage accounts. It helps prevent the three major impacts on your data and workload: malicious file uploads, sensitive data exfiltration, and data corruption. The new Defender for Storage plan includes Malware Scanning and Sensitive Data Threat Detection. This plan also provides a predictable pricing structure (per storage account) for control over coverage and costs. | AuditIfNotExists, Disabled | 1.0.0 |
Security Center standard pricing tier should be selected | The standard pricing tier enables threat detection for networks and virtual machines, providing threat intelligence, anomaly detection, and behavior analytics in Azure Security Center | Audit, Disabled | 1.1.0 |
SQL databases should have vulnerability findings resolved | Monitor vulnerability assessment scan results and recommendations for how to remediate database vulnerabilities. | AuditIfNotExists, Disabled | 4.1.0 |
Vulnerabilities in container security configurations should be remediated | Audit vulnerabilities in security configuration on machines with Docker installed and display as recommendations in Azure Security Center. | AuditIfNotExists, Disabled | 3.0.0 |
Vulnerabilities in security configuration on your machines should be remediated | Servers which do not satisfy the configured baseline will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.1.0 |
Vulnerabilities in security configuration on your virtual machine scale sets should be remediated | Audit the OS vulnerabilities on your virtual machine scale sets to protect them from attacks. | AuditIfNotExists, Disabled | 3.0.0 |
Vulnerability assessment should be enabled on SQL Managed Instance | Audit each SQL Managed Instance which doesn't have recurring vulnerability assessment scans enabled. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 1.0.1 |
Vulnerability assessment should be enabled on your SQL servers | Audit Azure SQL servers which do not have vulnerability assessment properly configured. Vulnerability assessment can discover, track, and help you remediate potential database vulnerabilities. | AuditIfNotExists, Disabled | 3.0.0 |
Risk Management
Periodically perform risk assessments to identify and prioritize risks according to the defined risk categories, risk sources and risk measurement criteria.
ID: CMMC L3 RM.3.144 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Azure Defender for App Service should be enabled | Azure Defender for App Service leverages the scale of the cloud, and the visibility that Azure has as a cloud provider, to monitor for common web app attacks. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for Azure SQL Database servers should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for Key Vault should be enabled | Azure Defender for Key Vault provides an additional layer of protection and security intelligence by detecting unusual and potentially harmful attempts to access or exploit key vault accounts. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for servers should be enabled | Azure Defender for servers provides real-time threat protection for server workloads and generates hardening recommendations as well as alerts about suspicious activities. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for SQL servers on machines should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Microsoft Defender for Containers should be enabled | Microsoft Defender for Containers provides hardening, vulnerability assessment and run-time protections for your Azure, hybrid, and multi-cloud Kubernetes environments. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft Defender for Storage should be enabled | Microsoft Defender for Storage detects potential threats to your storage accounts. It helps prevent the three major impacts on your data and workload: malicious file uploads, sensitive data exfiltration, and data corruption. The new Defender for Storage plan includes Malware Scanning and Sensitive Data Threat Detection. This plan also provides a predictable pricing structure (per storage account) for control over coverage and costs. | AuditIfNotExists, Disabled | 1.0.0 |
Security Center standard pricing tier should be selected | The standard pricing tier enables threat detection for networks and virtual machines, providing threat intelligence, anomaly detection, and behavior analytics in Azure Security Center | Audit, Disabled | 1.1.0 |
System and Communications Protection
Monitor, control, and protect communications (i.e., information transmitted or received by organizational systems) at the external boundaries and key internal boundaries of organizational systems.
ID: CMMC L3 SC.1.175 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: Storage account public access should be disallowed | Anonymous public read access to containers and blobs in Azure Storage is a convenient way to share data but might present security risks. To prevent data breaches caused by undesired anonymous access, Microsoft recommends preventing public access to a storage account unless your scenario requires it. | audit, Audit, deny, Deny, disabled, Disabled | 3.1.0-preview |
Adaptive network hardening recommendations should be applied on internet facing virtual machines | Azure Security Center analyzes the traffic patterns of Internet facing virtual machines and provides Network Security Group rule recommendations that reduce the potential attack surface | AuditIfNotExists, Disabled | 3.0.0 |
All network ports should be restricted on network security groups associated to your virtual machine | Azure Security Center has identified some of your network security groups' inbound rules to be too permissive. Inbound rules should not allow access from 'Any' or 'Internet' ranges. This can potentially enable attackers to target your resources. | AuditIfNotExists, Disabled | 3.0.0 |
App Service apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 4.0.0 |
App Service apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for App Service apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Azure AI Services resources should restrict network access | By restricting network access, you can ensure that only allowed networks can access the service. This can be achieved by configuring network rules so that only applications from allowed networks can access the Azure AI service. | Audit, Deny, Disabled | 3.2.0 |
Azure Web Application Firewall should be enabled for Azure Front Door entry-points | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 1.0.2 |
Cognitive Services accounts should disable public network access | To improve the security of Cognitive Services accounts, ensure that it isn't exposed to the public internet and can only be accessed from a private endpoint. Disable the public network access property as described in https://go.microsoft.com/fwlink/?linkid=2129800. This option disables access from any public address space outside the Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. This reduces data leakage risks. | Audit, Deny, Disabled | 3.0.1 |
Container registries should not allow unrestricted network access | Azure container registries by default accept connections over the internet from hosts on any network. To protect your registries from potential threats, allow access from only specific private endpoints, public IP addresses or address ranges. If your registry doesn't have network rules configured, it will appear in the unhealthy resources. Learn more about Container Registry network rules here: https://aka.ms/acr/privatelink, https://aka.ms/acr/portal/public-network and https://aka.ms/acr/vnet. | Audit, Deny, Disabled | 2.0.0 |
Flow logs should be configured for every network security group | Audit for network security groups to verify if flow logs are configured. Enabling flow logs allows to log information about IP traffic flowing through network security group. It can be used for optimizing network flows, monitoring throughput, verifying compliance, detecting intrusions and more. | Audit, Disabled | 1.1.0 |
Function apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 5.0.0 |
Function apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for Function apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Internet-facing virtual machines should be protected with network security groups | Protect your virtual machines from potential threats by restricting access to them with network security groups (NSG). Learn more about controlling traffic with NSGs at https://aka.ms/nsg-doc | AuditIfNotExists, Disabled | 3.0.0 |
Kubernetes cluster pods should only use approved host network and port range | Restrict pod access to the host network and the allowable host port range in a Kubernetes cluster. This recommendation is part of CIS 5.2.4 which is intended to improve the security of your Kubernetes environments. This policy is generally available for Kubernetes Service (AKS), and preview for Azure Arc enabled Kubernetes. For more information, see https://aka.ms/kubepolicydoc. | audit, Audit, deny, Deny, disabled, Disabled | 6.1.0 |
Management ports of virtual machines should be protected with just-in-time network access control | Possible network Just In Time (JIT) access will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Network Watcher should be enabled | Network Watcher is a regional service that enables you to monitor and diagnose conditions at a network scenario level in, to, and from Azure. Scenario level monitoring enables you to diagnose problems at an end to end network level view. It is required to have a network watcher resource group to be created in every region where a virtual network is present. An alert is enabled if a network watcher resource group is not available in a particular region. | AuditIfNotExists, Disabled | 3.0.0 |
Non-internet-facing virtual machines should be protected with network security groups | Protect your non-internet-facing virtual machines from potential threats by restricting access with network security groups (NSG). Learn more about controlling traffic with NSGs at https://aka.ms/nsg-doc | AuditIfNotExists, Disabled | 3.0.0 |
Only secure connections to your Azure Cache for Redis should be enabled | Audit enabling of only connections via SSL to Azure Cache for Redis. Use of secure connections ensures authentication between the server and the service and protects data in transit from network layer attacks such as man-in-the-middle, eavesdropping, and session-hijacking | Audit, Deny, Disabled | 1.0.0 |
Public network access on Azure SQL Database should be disabled | Disabling the public network access property improves security by ensuring your Azure SQL Database can only be accessed from a private endpoint. This configuration denies all logins that match IP or virtual network based firewall rules. | Audit, Deny, Disabled | 1.1.0 |
Public network access should be disabled for MariaDB servers | Disable the public network access property to improve security and ensure your Azure Database for MariaDB can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for MySQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for MySQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.1.0 |
Public network access should be disabled for MySQL servers | Disable the public network access property to improve security and ensure your Azure Database for MySQL can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for PostgreSQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for PostgreSQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 3.0.1 |
Public network access should be disabled for PostgreSQL servers | Disable the public network access property to improve security and ensure your Azure Database for PostgreSQL can only be accessed from a private endpoint. This configuration disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.1 |
Secure transfer to storage accounts should be enabled | Audit requirement of Secure transfer in your storage account. Secure transfer is an option that forces your storage account to accept requests only from secure connections (HTTPS). Use of HTTPS ensures authentication between the server and the service and protects data in transit from network layer attacks such as man-in-the-middle, eavesdropping, and session-hijacking | Audit, Deny, Disabled | 2.0.0 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Web Application Firewall (WAF) should be enabled for Application Gateway | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 2.0.0 |
Web Application Firewall (WAF) should use the specified mode for Application Gateway | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Application Gateway. | Audit, Deny, Disabled | 1.0.0 |
Web Application Firewall (WAF) should use the specified mode for Azure Front Door Service | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Azure Front Door Service. | Audit, Deny, Disabled | 1.0.0 |
Windows machines should be configured to use secure communication protocols | To protect the privacy of information communicated over the Internet, your machines should use the latest version of the industry-standard cryptographic protocol, Transport Layer Security (TLS). TLS secures communications over a network by encrypting a connection between machines. | AuditIfNotExists, Disabled | 4.1.1 |
Windows machines should meet requirements for 'Security Options - Network Access' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Access' for including access for anonymous users, local accounts, and remote access to the registry. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Windows machines should meet requirements for 'Security Options - Network Security' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Security' for including Local System behavior, PKU2U, LAN Manager, LDAP client, and NTLM SSP. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Implement subnetworks for publicly accessible system components that are physically or logically separated from internal networks.
ID: CMMC L3 SC.1.176 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Adaptive network hardening recommendations should be applied on internet facing virtual machines | Azure Security Center analyzes the traffic patterns of Internet facing virtual machines and provides Network Security Group rule recommendations that reduce the potential attack surface | AuditIfNotExists, Disabled | 3.0.0 |
All network ports should be restricted on network security groups associated to your virtual machine | Azure Security Center has identified some of your network security groups' inbound rules to be too permissive. Inbound rules should not allow access from 'Any' or 'Internet' ranges. This can potentially enable attackers to target your resources. | AuditIfNotExists, Disabled | 3.0.0 |
Internet-facing virtual machines should be protected with network security groups | Protect your virtual machines from potential threats by restricting access to them with network security groups (NSG). Learn more about controlling traffic with NSGs at https://aka.ms/nsg-doc | AuditIfNotExists, Disabled | 3.0.0 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Subnets should be associated with a Network Security Group | Protect your subnet from potential threats by restricting access to it with a Network Security Group (NSG). NSGs contain a list of Access Control List (ACL) rules that allow or deny network traffic to your subnet. | AuditIfNotExists, Disabled | 3.0.0 |
Use encrypted sessions for the management of network devices.
ID: CMMC L3 SC.2.179 Ownership: Customer
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Management ports of virtual machines should be protected with just-in-time network access control | Possible network Just In Time (JIT) access will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Employ FIPS-validated cryptography when used to protect the confidentiality of CUI.
ID: CMMC L3 SC.3.177 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Audit Windows machines that do not store passwords using reversible encryption | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if Windows machines that do not store passwords using reversible encryption | AuditIfNotExists, Disabled | 2.0.0 |
Automation account variables should be encrypted | It is important to enable encryption of Automation account variable assets when storing sensitive data | Audit, Deny, Disabled | 1.1.0 |
Azure API for FHIR should use a customer-managed key to encrypt data at rest | Use a customer-managed key to control the encryption at rest of the data stored in Azure API for FHIR when this is a regulatory or compliance requirement. Customer-managed keys also deliver double encryption by adding a second layer of encryption on top of the default one done with service-managed keys. | audit, Audit, disabled, Disabled | 1.1.0 |
Azure Data Box jobs should enable double encryption for data at rest on the device | Enable a second layer of software-based encryption for data at rest on the device. The device is already protected via Advanced Encryption Standard 256-bit encryption for data at rest. This option adds a second layer of data encryption. | Audit, Deny, Disabled | 1.0.0 |
Azure Data Explorer encryption at rest should use a customer-managed key | Enabling encryption at rest using a customer-managed key on your Azure Data Explorer cluster provides additional control over the key being used by the encryption at rest. This feature is oftentimes applicable to customers with special compliance requirements and requires a Key Vault to managing the keys. | Audit, Deny, Disabled | 1.0.0 |
Azure Stream Analytics jobs should use customer-managed keys to encrypt data | Use customer-managed keys when you want to securely store any metadata and private data assets of your Stream Analytics jobs in your storage account. This gives you total control over how your Stream Analytics data is encrypted. | audit, Audit, deny, Deny, disabled, Disabled | 1.1.0 |
Azure Synapse workspaces should use customer-managed keys to encrypt data at rest | Use customer-managed keys to control the encryption at rest of the data stored in Azure Synapse workspaces. Customer-managed keys deliver double encryption by adding a second layer of encryption on top of the default encryption with service-managed keys. | Audit, Deny, Disabled | 1.0.0 |
Both operating systems and data disks in Azure Kubernetes Service clusters should be encrypted by customer-managed keys | Encrypting OS and data disks using customer-managed keys provides more control and greater flexibility in key management. This is a common requirement in many regulatory and industry compliance standards. | Audit, Deny, Disabled | 1.0.1 |
Certificates using RSA cryptography should have the specified minimum key size | Manage your organizational compliance requirements by specifying a minimum key size for RSA certificates stored in your key vault. | audit, Audit, deny, Deny, disabled, Disabled | 2.1.0 |
Cognitive Services accounts should enable data encryption with a customer-managed key | Customer-managed keys are commonly required to meet regulatory compliance standards. Customer-managed keys enable the data stored in Cognitive Services to be encrypted with an Azure Key Vault key created and owned by you. You have full control and responsibility for the key lifecycle, including rotation and management. Learn more about customer-managed keys at https://go.microsoft.com/fwlink/?linkid=2121321. | Audit, Deny, Disabled | 2.1.0 |
Container registries should be encrypted with a customer-managed key | Use customer-managed keys to manage the encryption at rest of the contents of your registries. By default, the data is encrypted at rest with service-managed keys, but customer-managed keys are commonly required to meet regulatory compliance standards. Customer-managed keys enable the data to be encrypted with an Azure Key Vault key created and owned by you. You have full control and responsibility for the key lifecycle, including rotation and management. Learn more at https://aka.ms/acr/CMK. | Audit, Deny, Disabled | 1.1.2 |
Disk encryption should be enabled on Azure Data Explorer | Enabling disk encryption helps protect and safeguard your data to meet your organizational security and compliance commitments. | Audit, Deny, Disabled | 2.0.0 |
Double encryption should be enabled on Azure Data Explorer | Enabling double encryption helps protect and safeguard your data to meet your organizational security and compliance commitments. When double encryption has been enabled, data in the storage account is encrypted twice, once at the service level and once at the infrastructure level, using two different encryption algorithms and two different keys. | Audit, Deny, Disabled | 2.0.0 |
Infrastructure encryption should be enabled for Azure Database for MySQL servers | Enable infrastructure encryption for Azure Database for MySQL servers to have higher level of assurance that the data is secure. When infrastructure encryption is enabled, the data at rest is encrypted twice using FIPS 140-2 compliant Microsoft managed keys. | Audit, Deny, Disabled | 1.0.0 |
Infrastructure encryption should be enabled for Azure Database for PostgreSQL servers | Enable infrastructure encryption for Azure Database for PostgreSQL servers to have higher level of assurance that the data is secure. When infrastructure encryption is enabled, the data at rest is encrypted twice using FIPS 140-2 compliant Microsoft managed keys | Audit, Deny, Disabled | 1.0.0 |
Keys should be the specified cryptographic type RSA or EC | Some applications require the use of keys backed by a specific cryptographic type. Enforce a particular cryptographic key type, RSA or EC, in your environment. | Audit, Deny, Disabled | 1.0.1 |
Keys using elliptic curve cryptography should have the specified curve names | Keys backed by elliptic curve cryptography can have different curve names. Some applications are only compatible with specific elliptic curve keys. Enforce the types of elliptic curve keys that are allowed to be created in your environment. | Audit, Deny, Disabled | 1.0.1 |
Keys using RSA cryptography should have a specified minimum key size | Set the minimum allowed key size for use with your key vaults. Use of RSA keys with small key sizes is not a secure practice and doesn't meet many industry certification requirements. | Audit, Deny, Disabled | 1.0.1 |
Require encryption on Data Lake Store accounts | This policy ensures encryption is enabled on all Data Lake Store accounts | deny | 1.0.0 |
Service Fabric clusters should have the ClusterProtectionLevel property set to EncryptAndSign | Service Fabric provides three levels of protection (None, Sign and EncryptAndSign) for node-to-node communication using a primary cluster certificate. Set the protection level to ensure that all node-to-node messages are encrypted and digitally signed | Audit, Deny, Disabled | 1.1.0 |
SQL managed instances should use customer-managed keys to encrypt data at rest | Implementing Transparent Data Encryption (TDE) with your own key provides you with increased transparency and control over the TDE Protector, increased security with an HSM-backed external service, and promotion of separation of duties. This recommendation applies to organizations with a related compliance requirement. | Audit, Deny, Disabled | 2.0.0 |
SQL servers should use customer-managed keys to encrypt data at rest | Implementing Transparent Data Encryption (TDE) with your own key provides increased transparency and control over the TDE Protector, increased security with an HSM-backed external service, and promotion of separation of duties. This recommendation applies to organizations with a related compliance requirement. | Audit, Deny, Disabled | 2.0.1 |
Storage accounts should have infrastructure encryption | Enable infrastructure encryption for higher level of assurance that the data is secure. When infrastructure encryption is enabled, data in a storage account is encrypted twice. | Audit, Deny, Disabled | 1.0.0 |
Storage accounts should use customer-managed key for encryption | Secure your blob and file storage account with greater flexibility using customer-managed keys. When you specify a customer-managed key, that key is used to protect and control access to the key that encrypts your data. Using customer-managed keys provides additional capabilities to control rotation of the key encryption key or cryptographically erase data. | Audit, Disabled | 1.0.3 |
Transparent Data Encryption on SQL databases should be enabled | Transparent data encryption should be enabled to protect data-at-rest and meet compliance requirements | AuditIfNotExists, Disabled | 2.0.0 |
Virtual machines should encrypt temp disks, caches, and data flows between Compute and Storage resources | By default, a virtual machine's OS and data disks are encrypted-at-rest using platform-managed keys. Temp disks, data caches and data flowing between compute and storage aren't encrypted. Disregard this recommendation if: 1. using encryption-at-host, or 2. server-side encryption on Managed Disks meets your security requirements. Learn more in: Server-side encryption of Azure Disk Storage: https://aka.ms/disksse, Different disk encryption offerings: https://aka.ms/diskencryptioncomparison | AuditIfNotExists, Disabled | 2.0.3 |
Employ architectural designs, software development techniques, and systems engineering principles that promote effective information security within organizational systems.
ID: CMMC L3 SC.3.180 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Subnets should be associated with a Network Security Group | Protect your subnet from potential threats by restricting access to it with a Network Security Group (NSG). NSGs contain a list of Access Control List (ACL) rules that allow or deny network traffic to your subnet. | AuditIfNotExists, Disabled | 3.0.0 |
Separate user functionality from system management functionality.
ID: CMMC L3 SC.3.181 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
A maximum of 3 owners should be designated for your subscription | It is recommended to designate up to 3 subscription owners in order to reduce the potential for breach by a compromised owner. | AuditIfNotExists, Disabled | 3.0.0 |
An Azure Active Directory administrator should be provisioned for SQL servers | Audit provisioning of an Azure Active Directory administrator for your SQL server to enable Azure AD authentication. Azure AD authentication enables simplified permission management and centralized identity management of database users and other Microsoft services | AuditIfNotExists, Disabled | 1.0.0 |
Audit Windows machines that have the specified members in the Administrators group | Requires that prerequisites are deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. Machines are non-compliant if the local Administrators group contains one or more of the members listed in the policy parameter. | auditIfNotExists | 2.0.0 |
Blocked accounts with owner permissions on Azure resources should be removed | Deprecated accounts with owner permissions should be removed from your subscription. Deprecated accounts are accounts that have been blocked from signing in. | AuditIfNotExists, Disabled | 1.0.0 |
Guest accounts with owner permissions on Azure resources should be removed | External accounts with owner permissions should be removed from your subscription in order to prevent unmonitored access. | AuditIfNotExists, Disabled | 1.0.0 |
There should be more than one owner assigned to your subscription | It is recommended to designate more than one subscription owner in order to have administrator access redundancy. | AuditIfNotExists, Disabled | 3.0.0 |
Deny network communications traffic by default and allow network communications traffic by exception (i.e., deny all, permit by exception).
ID: CMMC L3 SC.3.183 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: All Internet traffic should be routed via your deployed Azure Firewall | Azure Security Center has identified that some of your subnets aren't protected with a next generation firewall. Protect your subnets from potential threats by restricting access to them with Azure Firewall or a supported next generation firewall | AuditIfNotExists, Disabled | 3.0.0-preview |
[Preview]: Storage account public access should be disallowed | Anonymous public read access to containers and blobs in Azure Storage is a convenient way to share data but might present security risks. To prevent data breaches caused by undesired anonymous access, Microsoft recommends preventing public access to a storage account unless your scenario requires it. | audit, Audit, deny, Deny, disabled, Disabled | 3.1.0-preview |
Adaptive network hardening recommendations should be applied on internet facing virtual machines | Azure Security Center analyzes the traffic patterns of Internet facing virtual machines and provides Network Security Group rule recommendations that reduce the potential attack surface | AuditIfNotExists, Disabled | 3.0.0 |
All network ports should be restricted on network security groups associated to your virtual machine | Azure Security Center has identified some of your network security groups' inbound rules to be too permissive. Inbound rules should not allow access from 'Any' or 'Internet' ranges. This can potentially enable attackers to target your resources. | AuditIfNotExists, Disabled | 3.0.0 |
App Service apps should not have CORS configured to allow every resource to access your apps | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your app. Allow only required domains to interact with your app. | AuditIfNotExists, Disabled | 2.0.0 |
Azure AI Services resources should restrict network access | By restricting network access, you can ensure that only allowed networks can access the service. This can be achieved by configuring network rules so that only applications from allowed networks can access the Azure AI service. | Audit, Deny, Disabled | 3.2.0 |
Azure Key Vault should have firewall enabled | Enable the key vault firewall so that the key vault is not accessible by default to any public IPs. Optionally, you can configure specific IP ranges to limit access to those networks. Learn more at: https://docs.microsoft.com/azure/key-vault/general/network-security | Audit, Deny, Disabled | 3.2.1 |
Azure Web Application Firewall should be enabled for Azure Front Door entry-points | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 1.0.2 |
Cognitive Services accounts should disable public network access | To improve the security of Cognitive Services accounts, ensure that it isn't exposed to the public internet and can only be accessed from a private endpoint. Disable the public network access property as described in https://go.microsoft.com/fwlink/?linkid=2129800. This option disables access from any public address space outside the Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. This reduces data leakage risks. | Audit, Deny, Disabled | 3.0.1 |
Container registries should not allow unrestricted network access | Azure container registries by default accept connections over the internet from hosts on any network. To protect your registries from potential threats, allow access from only specific private endpoints, public IP addresses or address ranges. If your registry doesn't have network rules configured, it will appear in the unhealthy resources. Learn more about Container Registry network rules here: https://aka.ms/acr/privatelink, https://aka.ms/acr/portal/public-network and https://aka.ms/acr/vnet. | Audit, Deny, Disabled | 2.0.0 |
CORS should not allow every domain to access your API for FHIR | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your API for FHIR. To protect your API for FHIR, remove access for all domains and explicitly define the domains allowed to connect. | audit, Audit, disabled, Disabled | 1.1.0 |
Flow logs should be configured for every network security group | Audit for network security groups to verify if flow logs are configured. Enabling flow logs allows to log information about IP traffic flowing through network security group. It can be used for optimizing network flows, monitoring throughput, verifying compliance, detecting intrusions and more. | Audit, Disabled | 1.1.0 |
Function apps should not have CORS configured to allow every resource to access your apps | Cross-Origin Resource Sharing (CORS) should not allow all domains to access your Function app. Allow only required domains to interact with your Function app. | AuditIfNotExists, Disabled | 2.0.0 |
Internet-facing virtual machines should be protected with network security groups | Protect your virtual machines from potential threats by restricting access to them with network security groups (NSG). Learn more about controlling traffic with NSGs at https://aka.ms/nsg-doc | AuditIfNotExists, Disabled | 3.0.0 |
Kubernetes cluster pods should only use approved host network and port range | Restrict pod access to the host network and the allowable host port range in a Kubernetes cluster. This recommendation is part of CIS 5.2.4 which is intended to improve the security of your Kubernetes environments. This policy is generally available for Kubernetes Service (AKS), and preview for Azure Arc enabled Kubernetes. For more information, see https://aka.ms/kubepolicydoc. | audit, Audit, deny, Deny, disabled, Disabled | 6.1.0 |
Management ports of virtual machines should be protected with just-in-time network access control | Possible network Just In Time (JIT) access will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Network Watcher should be enabled | Network Watcher is a regional service that enables you to monitor and diagnose conditions at a network scenario level in, to, and from Azure. Scenario level monitoring enables you to diagnose problems at an end to end network level view. It is required to have a network watcher resource group to be created in every region where a virtual network is present. An alert is enabled if a network watcher resource group is not available in a particular region. | AuditIfNotExists, Disabled | 3.0.0 |
Non-internet-facing virtual machines should be protected with network security groups | Protect your non-internet-facing virtual machines from potential threats by restricting access with network security groups (NSG). Learn more about controlling traffic with NSGs at https://aka.ms/nsg-doc | AuditIfNotExists, Disabled | 3.0.0 |
Public network access on Azure SQL Database should be disabled | Disabling the public network access property improves security by ensuring your Azure SQL Database can only be accessed from a private endpoint. This configuration denies all logins that match IP or virtual network based firewall rules. | Audit, Deny, Disabled | 1.1.0 |
Public network access should be disabled for MariaDB servers | Disable the public network access property to improve security and ensure your Azure Database for MariaDB can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for MySQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for MySQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.1.0 |
Public network access should be disabled for MySQL servers | Disable the public network access property to improve security and ensure your Azure Database for MySQL can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.0 |
Public network access should be disabled for PostgreSQL flexible servers | Disabling the public network access property improves security by ensuring your Azure Database for PostgreSQL flexible servers can only be accessed from a private endpoint. This configuration strictly disables access from any public address space outside of Azure IP range and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 3.0.1 |
Public network access should be disabled for PostgreSQL servers | Disable the public network access property to improve security and ensure your Azure Database for PostgreSQL can only be accessed from a private endpoint. This configuration disables access from any public address space outside of Azure IP range, and denies all logins that match IP or virtual network-based firewall rules. | Audit, Deny, Disabled | 2.0.1 |
Storage accounts should allow access from trusted Microsoft services | Some Microsoft services that interact with storage accounts operate from networks that can't be granted access through network rules. To help this type of service work as intended, allow the set of trusted Microsoft services to bypass the network rules. These services will then use strong authentication to access the storage account. | Audit, Deny, Disabled | 1.0.0 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Subnets should be associated with a Network Security Group | Protect your subnet from potential threats by restricting access to it with a Network Security Group (NSG). NSGs contain a list of Access Control List (ACL) rules that allow or deny network traffic to your subnet. | AuditIfNotExists, Disabled | 3.0.0 |
Web Application Firewall (WAF) should be enabled for Application Gateway | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 2.0.0 |
Web Application Firewall (WAF) should use the specified mode for Application Gateway | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Application Gateway. | Audit, Deny, Disabled | 1.0.0 |
Web Application Firewall (WAF) should use the specified mode for Azure Front Door Service | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Azure Front Door Service. | Audit, Deny, Disabled | 1.0.0 |
Windows machines should meet requirements for 'Security Options - Network Access' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Access' for including access for anonymous users, local accounts, and remote access to the registry. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Windows machines should meet requirements for 'Security Options - Network Security' | Windows machines should have the specified Group Policy settings in the category 'Security Options - Network Security' for including Local System behavior, PKU2U, LAN Manager, LDAP client, and NTLM SSP. This policy requires that the Guest Configuration prerequisites have been deployed to the policy assignment scope. For details, visit https://aka.ms/gcpol. | AuditIfNotExists, Disabled | 3.0.0 |
Implement cryptographic mechanisms to prevent unauthorized disclosure of CUI during transmission unless otherwise protected by alternative physical safeguards.
ID: CMMC L3 SC.3.185 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
App Service apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 4.0.0 |
App Service apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for App Service apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Enforce SSL connection should be enabled for MySQL database servers | Azure Database for MySQL supports connecting your Azure Database for MySQL server to client applications using Secure Sockets Layer (SSL). Enforcing SSL connections between your database server and your client applications helps protect against 'man in the middle' attacks by encrypting the data stream between the server and your application. This configuration enforces that SSL is always enabled for accessing your database server. | Audit, Disabled | 1.0.1 |
Enforce SSL connection should be enabled for PostgreSQL database servers | Azure Database for PostgreSQL supports connecting your Azure Database for PostgreSQL server to client applications using Secure Sockets Layer (SSL). Enforcing SSL connections between your database server and your client applications helps protect against 'man in the middle' attacks by encrypting the data stream between the server and your application. This configuration enforces that SSL is always enabled for accessing your database server. | Audit, Disabled | 1.0.1 |
Function apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 5.0.0 |
Function apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for Function apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Only secure connections to your Azure Cache for Redis should be enabled | Audit enabling of only connections via SSL to Azure Cache for Redis. Use of secure connections ensures authentication between the server and the service and protects data in transit from network layer attacks such as man-in-the-middle, eavesdropping, and session-hijacking | Audit, Deny, Disabled | 1.0.0 |
Secure transfer to storage accounts should be enabled | Audit requirement of Secure transfer in your storage account. Secure transfer is an option that forces your storage account to accept requests only from secure connections (HTTPS). Use of HTTPS ensures authentication between the server and the service and protects data in transit from network layer attacks such as man-in-the-middle, eavesdropping, and session-hijacking | Audit, Deny, Disabled | 2.0.0 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Windows machines should be configured to use secure communication protocols | To protect the privacy of information communicated over the Internet, your machines should use the latest version of the industry-standard cryptographic protocol, Transport Layer Security (TLS). TLS secures communications over a network by encrypting a connection between machines. | AuditIfNotExists, Disabled | 4.1.1 |
Establish and manage cryptographic keys for cryptography employed in organizational systems.
ID: CMMC L3 SC.3.187 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Azure Defender for Key Vault should be enabled | Azure Defender for Key Vault provides an additional layer of protection and security intelligence by detecting unusual and potentially harmful attempts to access or exploit key vault accounts. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Key Vault should have firewall enabled | Enable the key vault firewall so that the key vault is not accessible by default to any public IPs. Optionally, you can configure specific IP ranges to limit access to those networks. Learn more at: https://docs.microsoft.com/azure/key-vault/general/network-security | Audit, Deny, Disabled | 3.2.1 |
Key Vault keys should have an expiration date | Cryptographic keys should have a defined expiration date and not be permanent. Keys that are valid forever provide a potential attacker with more time to compromise the key. It is a recommended security practice to set expiration dates on cryptographic keys. | Audit, Deny, Disabled | 1.0.2 |
Key vaults should have deletion protection enabled | Malicious deletion of a key vault can lead to permanent data loss. You can prevent permanent data loss by enabling purge protection and soft delete. Purge protection protects you from insider attacks by enforcing a mandatory retention period for soft deleted key vaults. No one inside your organization or Microsoft will be able to purge your key vaults during the soft delete retention period. Keep in mind that key vaults created after September 1st 2019 have soft-delete enabled by default. | Audit, Deny, Disabled | 2.1.0 |
Key vaults should have soft delete enabled | Deleting a key vault without soft delete enabled permanently deletes all secrets, keys, and certificates stored in the key vault. Accidental deletion of a key vault can lead to permanent data loss. Soft delete allows you to recover an accidentally deleted key vault for a configurable retention period. | Audit, Deny, Disabled | 3.0.0 |
Keys should be the specified cryptographic type RSA or EC | Some applications require the use of keys backed by a specific cryptographic type. Enforce a particular cryptographic key type, RSA or EC, in your environment. | Audit, Deny, Disabled | 1.0.1 |
Keys using elliptic curve cryptography should have the specified curve names | Keys backed by elliptic curve cryptography can have different curve names. Some applications are only compatible with specific elliptic curve keys. Enforce the types of elliptic curve keys that are allowed to be created in your environment. | Audit, Deny, Disabled | 1.0.1 |
Keys using RSA cryptography should have a specified minimum key size | Set the minimum allowed key size for use with your key vaults. Use of RSA keys with small key sizes is not a secure practice and doesn't meet many industry certification requirements. | Audit, Deny, Disabled | 1.0.1 |
Protect the authenticity of communications sessions.
ID: CMMC L3 SC.3.190 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Accounts with owner permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with owner permissions to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Accounts with read permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with read privileges to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
Accounts with write permissions on Azure resources should be MFA enabled | Multi-Factor Authentication (MFA) should be enabled for all subscription accounts with write privileges to prevent a breach of accounts or resources. | AuditIfNotExists, Disabled | 1.0.0 |
App Service apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 4.0.0 |
App Service apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for App Service apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Certificates using RSA cryptography should have the specified minimum key size | Manage your organizational compliance requirements by specifying a minimum key size for RSA certificates stored in your key vault. | audit, Audit, deny, Deny, disabled, Disabled | 2.1.0 |
Enforce SSL connection should be enabled for MySQL database servers | Azure Database for MySQL supports connecting your Azure Database for MySQL server to client applications using Secure Sockets Layer (SSL). Enforcing SSL connections between your database server and your client applications helps protect against 'man in the middle' attacks by encrypting the data stream between the server and your application. This configuration enforces that SSL is always enabled for accessing your database server. | Audit, Disabled | 1.0.1 |
Enforce SSL connection should be enabled for PostgreSQL database servers | Azure Database for PostgreSQL supports connecting your Azure Database for PostgreSQL server to client applications using Secure Sockets Layer (SSL). Enforcing SSL connections between your database server and your client applications helps protect against 'man in the middle' attacks by encrypting the data stream between the server and your application. This configuration enforces that SSL is always enabled for accessing your database server. | Audit, Disabled | 1.0.1 |
Function apps should only be accessible over HTTPS | Use of HTTPS ensures server/service authentication and protects data in transit from network layer eavesdropping attacks. | Audit, Disabled, Deny | 5.0.0 |
Function apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for Function apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Windows machines should be configured to use secure communication protocols | To protect the privacy of information communicated over the Internet, your machines should use the latest version of the industry-standard cryptographic protocol, Transport Layer Security (TLS). TLS secures communications over a network by encrypting a connection between machines. | AuditIfNotExists, Disabled | 4.1.1 |
Protect the confidentiality of CUI at rest.
ID: CMMC L3 SC.3.191 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Automation account variables should be encrypted | It is important to enable encryption of Automation account variable assets when storing sensitive data | Audit, Deny, Disabled | 1.1.0 |
Azure Data Box jobs should enable double encryption for data at rest on the device | Enable a second layer of software-based encryption for data at rest on the device. The device is already protected via Advanced Encryption Standard 256-bit encryption for data at rest. This option adds a second layer of data encryption. | Audit, Deny, Disabled | 1.0.0 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Disk encryption should be enabled on Azure Data Explorer | Enabling disk encryption helps protect and safeguard your data to meet your organizational security and compliance commitments. | Audit, Deny, Disabled | 2.0.0 |
Double encryption should be enabled on Azure Data Explorer | Enabling double encryption helps protect and safeguard your data to meet your organizational security and compliance commitments. When double encryption has been enabled, data in the storage account is encrypted twice, once at the service level and once at the infrastructure level, using two different encryption algorithms and two different keys. | Audit, Deny, Disabled | 2.0.0 |
Infrastructure encryption should be enabled for Azure Database for MySQL servers | Enable infrastructure encryption for Azure Database for MySQL servers to have higher level of assurance that the data is secure. When infrastructure encryption is enabled, the data at rest is encrypted twice using FIPS 140-2 compliant Microsoft managed keys. | Audit, Deny, Disabled | 1.0.0 |
Infrastructure encryption should be enabled for Azure Database for PostgreSQL servers | Enable infrastructure encryption for Azure Database for PostgreSQL servers to have higher level of assurance that the data is secure. When infrastructure encryption is enabled, the data at rest is encrypted twice using FIPS 140-2 compliant Microsoft managed keys | Audit, Deny, Disabled | 1.0.0 |
Require encryption on Data Lake Store accounts | This policy ensures encryption is enabled on all Data Lake Store accounts | deny | 1.0.0 |
Service Fabric clusters should have the ClusterProtectionLevel property set to EncryptAndSign | Service Fabric provides three levels of protection (None, Sign and EncryptAndSign) for node-to-node communication using a primary cluster certificate. Set the protection level to ensure that all node-to-node messages are encrypted and digitally signed | Audit, Deny, Disabled | 1.1.0 |
Storage accounts should have infrastructure encryption | Enable infrastructure encryption for higher level of assurance that the data is secure. When infrastructure encryption is enabled, data in a storage account is encrypted twice. | Audit, Deny, Disabled | 1.0.0 |
Storage accounts should restrict network access | Network access to storage accounts should be restricted. Configure network rules so only applications from allowed networks can access the storage account. To allow connections from specific internet or on-premises clients, access can be granted to traffic from specific Azure virtual networks or to public internet IP address ranges | Audit, Deny, Disabled | 1.1.1 |
Transparent Data Encryption on SQL databases should be enabled | Transparent data encryption should be enabled to protect data-at-rest and meet compliance requirements | AuditIfNotExists, Disabled | 2.0.0 |
Virtual machines should encrypt temp disks, caches, and data flows between Compute and Storage resources | By default, a virtual machine's OS and data disks are encrypted-at-rest using platform-managed keys. Temp disks, data caches and data flowing between compute and storage aren't encrypted. Disregard this recommendation if: 1. using encryption-at-host, or 2. server-side encryption on Managed Disks meets your security requirements. Learn more in: Server-side encryption of Azure Disk Storage: https://aka.ms/disksse, Different disk encryption offerings: https://aka.ms/diskencryptioncomparison | AuditIfNotExists, Disabled | 2.0.3 |
System and Information Integrity
Identify, report, and correct information and information system flaws in a timely manner.
ID: CMMC L3 SI.1.210 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
App Service apps should use latest 'HTTP Version' | Periodically, newer versions are released for HTTP either due to security flaws or to include additional functionality. Using the latest HTTP version for web apps to take advantage of security fixes, if any, and/or new functionalities of the newer version. | AuditIfNotExists, Disabled | 4.0.0 |
App Service apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for App Service apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Function apps should use latest 'HTTP Version' | Periodically, newer versions are released for HTTP either due to security flaws or to include additional functionality. Using the latest HTTP version for web apps to take advantage of security fixes, if any, and/or new functionalities of the newer version. | AuditIfNotExists, Disabled | 4.0.0 |
Function apps should use the latest TLS version | Periodically, newer versions are released for TLS either due to security flaws, include additional functionality, and enhance speed. Upgrade to the latest TLS version for Function apps to take advantage of security fixes, if any, and/or new functionalities of the latest version. | AuditIfNotExists, Disabled | 2.0.1 |
Kubernetes Services should be upgraded to a non-vulnerable Kubernetes version | Upgrade your Kubernetes service cluster to a later Kubernetes version to protect against known vulnerabilities in your current Kubernetes version. Vulnerability CVE-2019-9946 has been patched in Kubernetes versions 1.11.9+, 1.12.7+, 1.13.5+, and 1.14.0+ | Audit, Disabled | 1.0.2 |
Microsoft Antimalware for Azure should be configured to automatically update protection signatures | This policy audits any Windows virtual machine not configured with automatic update of Microsoft Antimalware protection signatures. | AuditIfNotExists, Disabled | 1.0.0 |
SQL databases should have vulnerability findings resolved | Monitor vulnerability assessment scan results and recommendations for how to remediate database vulnerabilities. | AuditIfNotExists, Disabled | 4.1.0 |
System updates on virtual machine scale sets should be installed | Audit whether there are any missing system security updates and critical updates that should be installed to ensure that your Windows and Linux virtual machine scale sets are secure. | AuditIfNotExists, Disabled | 3.0.0 |
System updates should be installed on your machines | Missing security system updates on your servers will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 4.0.0 |
Vulnerabilities in security configuration on your machines should be remediated | Servers which do not satisfy the configured baseline will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.1.0 |
Vulnerabilities in security configuration on your virtual machine scale sets should be remediated | Audit the OS vulnerabilities on your virtual machine scale sets to protect them from attacks. | AuditIfNotExists, Disabled | 3.0.0 |
Provide protection from malicious code at appropriate locations within organizational information systems.
ID: CMMC L3 SI.1.211 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Endpoint protection solution should be installed on virtual machine scale sets | Audit the existence and health of an endpoint protection solution on your virtual machines scale sets, to protect them from threats and vulnerabilities. | AuditIfNotExists, Disabled | 3.0.0 |
Microsoft Antimalware for Azure should be configured to automatically update protection signatures | This policy audits any Windows virtual machine not configured with automatic update of Microsoft Antimalware protection signatures. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft IaaSAntimalware extension should be deployed on Windows servers | This policy audits any Windows server VM without Microsoft IaaSAntimalware extension deployed. | AuditIfNotExists, Disabled | 1.1.0 |
Monitor missing Endpoint Protection in Azure Security Center | Servers without an installed Endpoint Protection agent will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Update malicious code protection mechanisms when new releases are available.
ID: CMMC L3 SI.1.212 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Microsoft Antimalware for Azure should be configured to automatically update protection signatures | This policy audits any Windows virtual machine not configured with automatic update of Microsoft Antimalware protection signatures. | AuditIfNotExists, Disabled | 1.0.0 |
Perform periodic scans of the information system and real-time scans of files from external sources as files are downloaded, opened, or executed.
ID: CMMC L3 SI.1.213 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Azure Defender for App Service should be enabled | Azure Defender for App Service leverages the scale of the cloud, and the visibility that Azure has as a cloud provider, to monitor for common web app attacks. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for Azure SQL Database servers should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for Key Vault should be enabled | Azure Defender for Key Vault provides an additional layer of protection and security intelligence by detecting unusual and potentially harmful attempts to access or exploit key vault accounts. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for servers should be enabled | Azure Defender for servers provides real-time threat protection for server workloads and generates hardening recommendations as well as alerts about suspicious activities. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for SQL servers on machines should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Microsoft Antimalware for Azure should be configured to automatically update protection signatures | This policy audits any Windows virtual machine not configured with automatic update of Microsoft Antimalware protection signatures. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft Defender for Containers should be enabled | Microsoft Defender for Containers provides hardening, vulnerability assessment and run-time protections for your Azure, hybrid, and multi-cloud Kubernetes environments. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft Defender for Storage should be enabled | Microsoft Defender for Storage detects potential threats to your storage accounts. It helps prevent the three major impacts on your data and workload: malicious file uploads, sensitive data exfiltration, and data corruption. The new Defender for Storage plan includes Malware Scanning and Sensitive Data Threat Detection. This plan also provides a predictable pricing structure (per storage account) for control over coverage and costs. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft IaaSAntimalware extension should be deployed on Windows servers | This policy audits any Windows server VM without Microsoft IaaSAntimalware extension deployed. | AuditIfNotExists, Disabled | 1.1.0 |
Monitor missing Endpoint Protection in Azure Security Center | Servers without an installed Endpoint Protection agent will be monitored by Azure Security Center as recommendations | AuditIfNotExists, Disabled | 3.0.0 |
Monitor organizational systems, including inbound and outbound communications traffic, to detect attacks and indicators of potential attacks.
ID: CMMC L3 SI.2.216 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
[Preview]: All Internet traffic should be routed via your deployed Azure Firewall | Azure Security Center has identified that some of your subnets aren't protected with a next generation firewall. Protect your subnets from potential threats by restricting access to them with Azure Firewall or a supported next generation firewall | AuditIfNotExists, Disabled | 3.0.0-preview |
An activity log alert should exist for specific Administrative operations | This policy audits specific Administrative operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
An activity log alert should exist for specific Policy operations | This policy audits specific Policy operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 3.0.0 |
An activity log alert should exist for specific Security operations | This policy audits specific Security operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Azure Defender for App Service should be enabled | Azure Defender for App Service leverages the scale of the cloud, and the visibility that Azure has as a cloud provider, to monitor for common web app attacks. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for Azure SQL Database servers should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for Key Vault should be enabled | Azure Defender for Key Vault provides an additional layer of protection and security intelligence by detecting unusual and potentially harmful attempts to access or exploit key vault accounts. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for servers should be enabled | Azure Defender for servers provides real-time threat protection for server workloads and generates hardening recommendations as well as alerts about suspicious activities. | AuditIfNotExists, Disabled | 1.0.3 |
Azure Defender for SQL servers on machines should be enabled | Azure Defender for SQL provides functionality for surfacing and mitigating potential database vulnerabilities, detecting anomalous activities that could indicate threats to SQL databases, and discovering and classifying sensitive data. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Monitor should collect activity logs from all regions | This policy audits the Azure Monitor log profile which does not export activities from all Azure supported regions including global. | AuditIfNotExists, Disabled | 2.0.0 |
Azure subscriptions should have a log profile for Activity Log | This policy ensures if a log profile is enabled for exporting activity logs. It audits if there is no log profile created to export the logs either to a storage account or to an event hub. | AuditIfNotExists, Disabled | 1.0.0 |
Azure Web Application Firewall should be enabled for Azure Front Door entry-points | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 1.0.2 |
Email notification to subscription owner for high severity alerts should be enabled | To ensure your subscription owners are notified when there is a potential security breach in their subscription, set email notifications to subscription owners for high severity alerts in Security Center. | AuditIfNotExists, Disabled | 2.0.0 |
Flow logs should be configured for every network security group | Audit for network security groups to verify if flow logs are configured. Enabling flow logs allows to log information about IP traffic flowing through network security group. It can be used for optimizing network flows, monitoring throughput, verifying compliance, detecting intrusions and more. | Audit, Disabled | 1.1.0 |
Microsoft Defender for Containers should be enabled | Microsoft Defender for Containers provides hardening, vulnerability assessment and run-time protections for your Azure, hybrid, and multi-cloud Kubernetes environments. | AuditIfNotExists, Disabled | 1.0.0 |
Microsoft Defender for Storage should be enabled | Microsoft Defender for Storage detects potential threats to your storage accounts. It helps prevent the three major impacts on your data and workload: malicious file uploads, sensitive data exfiltration, and data corruption. The new Defender for Storage plan includes Malware Scanning and Sensitive Data Threat Detection. This plan also provides a predictable pricing structure (per storage account) for control over coverage and costs. | AuditIfNotExists, Disabled | 1.0.0 |
Network Watcher should be enabled | Network Watcher is a regional service that enables you to monitor and diagnose conditions at a network scenario level in, to, and from Azure. Scenario level monitoring enables you to diagnose problems at an end to end network level view. It is required to have a network watcher resource group to be created in every region where a virtual network is present. An alert is enabled if a network watcher resource group is not available in a particular region. | AuditIfNotExists, Disabled | 3.0.0 |
Subscriptions should have a contact email address for security issues | To ensure the relevant people in your organization are notified when there is a potential security breach in one of your subscriptions, set a security contact to receive email notifications from Security Center. | AuditIfNotExists, Disabled | 1.0.1 |
Web Application Firewall (WAF) should be enabled for Application Gateway | Deploy Azure Web Application Firewall (WAF) in front of public facing web applications for additional inspection of incoming traffic. Web Application Firewall (WAF) provides centralized protection of your web applications from common exploits and vulnerabilities such as SQL injections, Cross-Site Scripting, local and remote file executions. You can also restrict access to your web applications by countries, IP address ranges, and other http(s) parameters via custom rules. | Audit, Deny, Disabled | 2.0.0 |
Web Application Firewall (WAF) should use the specified mode for Application Gateway | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Application Gateway. | Audit, Deny, Disabled | 1.0.0 |
Web Application Firewall (WAF) should use the specified mode for Azure Front Door Service | Mandates the use of 'Detection' or 'Prevention' mode to be active on all Web Application Firewall policies for Azure Front Door Service. | Audit, Deny, Disabled | 1.0.0 |
Identify unauthorized use of organizational systems.
ID: CMMC L3 SI.2.217 Ownership: Shared
Name (Azure portal) |
Description | Effect(s) | Version (GitHub) |
---|---|---|---|
Activity log should be retained for at least one year | This policy audits the activity log if the retention is not set for 365 days or forever (retention days set to 0). | AuditIfNotExists, Disabled | 1.0.0 |
An activity log alert should exist for specific Administrative operations | This policy audits specific Administrative operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
An activity log alert should exist for specific Policy operations | This policy audits specific Policy operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 3.0.0 |
An activity log alert should exist for specific Security operations | This policy audits specific Security operations with no activity log alerts configured. | AuditIfNotExists, Disabled | 1.0.0 |
Azure Defender for SQL should be enabled for unprotected Azure SQL servers | Audit SQL servers without Advanced Data Security | AuditIfNotExists, Disabled | 2.0.1 |
Azure Defender for SQL should be enabled for unprotected SQL Managed Instances | Audit each SQL Managed Instance without advanced data security. | AuditIfNotExists, Disabled | 1.0.2 |
Azure Monitor log profile should collect logs for categories 'write,' 'delete,' and 'action' | This policy ensures that a log profile collects logs for categories 'write,' 'delete,' and 'action' | AuditIfNotExists, Disabled | 1.0.0 |
Azure Monitor should collect activity logs from all regions | This policy audits the Azure Monitor log profile which does not export activities from all Azure supported regions including global. | AuditIfNotExists, Disabled | 2.0.0 |
Azure subscriptions should have a log profile for Activity Log | This policy ensures if a log profile is enabled for exporting activity logs. It audits if there is no log profile created to export the logs either to a storage account or to an event hub. | AuditIfNotExists, Disabled | 1.0.0 |
Email notification to subscription owner for high severity alerts should be enabled | To ensure your subscription owners are notified when there is a potential security breach in their subscription, set email notifications to subscription owners for high severity alerts in Security Center. | AuditIfNotExists, Disabled | 2.0.0 |
Network Watcher should be enabled | Network Watcher is a regional service that enables you to monitor and diagnose conditions at a network scenario level in, to, and from Azure. Scenario level monitoring enables you to diagnose problems at an end to end network level view. It is required to have a network watcher resource group to be created in every region where a virtual network is present. An alert is enabled if a network watcher resource group is not available in a particular region. | AuditIfNotExists, Disabled | 3.0.0 |
Next steps
Additional articles about Azure Policy:
- Regulatory Compliance overview.
- See the initiative definition structure.
- Review other examples at Azure Policy samples.
- Review Understanding policy effects.
- Learn how to remediate non-compliant resources.
Feedback
https://aka.ms/ContentUserFeedback.
Coming soon: Throughout 2024 we will be phasing out GitHub Issues as the feedback mechanism for content and replacing it with a new feedback system. For more information see:Submit and view feedback for