Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
This article describes the Packing work order type, which manages work for packing containers. It supports partial shipments of packed containers that are related to loads where inventory items remain unpacked. Packing work lets you use confirm and transfer functionality to confirm outbound shipments that are associated with containers. It also provides an optional container conversion feature that converts eligible work containers into packing station containers when they arrive at a packing station.
Packing work is automatically created when inventory that is related to source document work is put in locations of the Packing location type. The work consists of two lines, one for Pick and one for Put. The system automatically maintains it as part of a container close and reopen process.
Note
In Supply Chain Management version 10.0.45 and later, the Warehouse Management mobile app can record the worker IDs of workers that use it to do packing work. Learn more in Create containers, Close containers, and Pack inventory into containers.
For more information about how to set up and use the container packing process, see Pack containers for shipment.
If packing notes don't appear in the packing form, check whether they're associated with the shipment. Packing instructions attached only to a product master or a product variant aren't shown as packing notes in the form.
Set up a location for packing work
Use the following procedure to set up packing locations. For each location, you can select whether the system automatically creates packing work.
Go to Warehouse management > Setup > Packing > Packing station setup.
On the Action Pane, select New to add a packing station setup record.
In the new record, set the following fields:
- Warehouse – Select or enter the warehouse where the packing location is located.
- Location – Select or enter the packing location. Assign this location to a location profile that uses the location type configured as the packing location type for your company on the Warehouse management parameters page. Learn more in Pack containers for shipment.
- Create packing work – Select this checkbox to create packing work each time that items are delivered to the packing location. The work includes links to related load lines, so that partial loads can be packed and shipped.
- Container packing policy – If you want to stamp a container closing profile (container packing policy) on each work container that's converted into a packing station container at this location, select the profile here. Learn more in Convert work containers at a packing station.
- Force container closing profile – If you want to require that the system always apply the Container packing policy set for this packing station, then select this checkbox.
- Default packing profile – If you want to use a default packing profile for containers that are packed at this packing station, select the default profile here. If you set this value while also using the Force container closing profile option, the profile you select here must be configured with a Container packing policy that matches one selected for this packing station.
Caution
Before enabling the Create packing work option, make sure the packing station is empty (no items are present).
Example scenario: Pack and ship a partial load
This example scenario shows how to process an outbound sales order flow by packing a container and shipping a partial load.
Make sample data available
To work through this scenario by using the sample records and values that are specified here, you must be on a system where the standard demo data is installed. Also, you must select the USMF legal entity before you begin.
You can also use this scenario as guidance for using the feature on a production system. However, in that case, you must substitute your own values for each setting that is described here.
Configure packing work for warehouse packing location
Configure the Packing work process for a specific warehouse and location.
Go to Warehouse management > Setup > Packing > Packing station setup.
On the Action Pane, select New to add a setup record.
In the new record, set the following values:
- Warehouse: 62
- Location: Pack
- Create packing work: Yes
Close the Packing station setup page.
Create a load template that allows partial shipping
To enable a load to be delivered over multiple shipments, associate it with a load template that allows partial shipping. Follow these steps to create the required template.
Go to Warehouse management > Setup > Load > Load templates.
On the Action Pane, select New to add a setup record.
In the new record, set the following values:
- Load template ID: Partial
- Allow load split during ship confirm: Yes
Close the Load templates page.
Learn more in Confirm and transfer.
Process a sales order
Follow these steps to process a sales order and partially ship it.
- Complete the example scenario that's provided in Pack containers for shipment. During that scenario, you create a sales order for two pieces of one item. You then pack just one of the pieces into a container and close the container. Make a note of the shipment ID that you create, as instructed in the scenario.
- Go to Warehouse management > Work > All work.
- In the filter area, select the Show closed work checkbox. Then enter the shipment ID in the Filter field, and select to filter by Shipment ID value. You should now see three work headers. One is for the sales order picking work and has a status of Closed. Two are for the packing process: one is related to the closed container and has a status of Closed, and the other is related to the unpacked remaining item and has a status of Open.
- Select the Load ID value for any of the work headers to open Load details page for the load.
- Switch to the Header view.
- On the General FastTab, select the Edit button for the Load template ID field. Then select the partial shipping load template that you created for this scenario (Partial).
- On the Action Pane, on the Ship and receive tab, in the Confirm group, select Outbound shipment.
- In the Ship confirm dialog box, select the Split quantity to new load option.
- Select OK.
You shipped one container that is related to the original load, and the system creates a new load for the remaining items that must still be packed into containers.
Convert work containers at a packing station
Supply Chain Management works with two kinds of containers, and it handles them differently:
- Work containers are created by the wave containerization process, which plans the contents of each container before picking begins. The system closes a work container automatically, as the final step of work execution. Because the container is already closed by the time it reaches the packing station, workers can't weigh it, manifest it through a transportation management system, or print a shipping label for it as an individual container.
- Packing station containers are created by a worker at a packing station. They stay open until a worker explicitly closes them, so they can be weighed, manifested, and labeled first.
You can set up the system so that it converts a work container into a packing station container when the container arrives at a packing station. The container then stays open, and workers handle it exactly as if they built it at the packing station themselves.
Prerequisites
Before you use the functionality that's described in this section, ensure your system meets the following requirements:
- You're running Supply Chain Management version 10.0.49 or later.
- The packing station is set up to create packing work, as described in Set up a location for packing work.
When the system converts a container
The system converts a container only when all the following conditions are met. Otherwise, the system automatically closes the container and packing continues as usual.
- The put is the step that closes the work. The system evaluates conversion only when a put completes both the work line and the whole work header. Earlier puts never trigger conversion.
- The put location is a packing station where Create packing work is turned on, and the work is for an outbound shipment.
- The container is still open. A container that's already closed can't be converted.
- The contents of the container belong to a single work header. The system skips any container that is shared with another work, that has a parent container, or that is itself a parent container.
When the system converts a container, it makes the following changes:
- It moves the container build ID to a separate field, where it remains available for tracing, and it clears the original field. As a result, no other process treats the container as a work container any longer.
- It stamps the container with the container closing profile (container packing policy) that's defined for the packing station.
- It updates the container, and each of its lines, to reflect the packing station location and the dimensions that the items were put to, including the tote license plate, if one was used.
Conversion occurs before the system creates the packing work for the put, so the new packing work reflects the converted container.
Note
The system doesn't convert containers that are marked as error containers. Instead, the system unpacks them. It removes the container reference from the work lines and deletes the container, so that the items arrive at the packing station as unpacked inventory.
Choose how the system handles work containers you put at a packing station
To choose how the system handles work containers you put at a packing station, follow these steps:
Go to Warehouse management > Setup > Warehouse management parameters.
Open the Packing tab.
Set the Convert work containers to packing station containers field to one of the following values:
- Not allowed – The system never converts work containers. Workers can still put them at a packing station, but the system automatically closes each container during work execution, as it did before this functionality was introduced.
- Aligned with work headers – The system converts each work container whose contents belong to a single work header, as described in When the system converts a container. The system automatically closes containers that don't meet the conditions.
Close the page to save your changes.
Set up the packing station for container conversion
A work container might arrive at any packing station, so the system can't infer which container closing profile (container packing policy) to stamp on it. You must therefore assign the profile on each packing station where conversion can occur.
Set the Container packing policy field for the packing station, as described in Set up a location for packing work. If a work container reaches a packing station where this field is blank, the system shows the following error, and the put can't be completed: A container closing profile must be specified on the packing station setup to convert work containers to packing station containers.
To prevent workers from applying a different profile to containers at the station, also turn on the Force container closing profile option. The system then always applies the profile that you specify here, and it ignores any profile that's set for the worker or for the default packing profile. If you use this option together with the Default packing profile field, the two profiles must specify the same container packing policy.