Set up Microsoft Defender for Endpoint deployment
Want to experience Microsoft Defender for Endpoint? Sign up for a free trial.
Deploying Defender for Endpoint is a three-phase process:
Phase 1: Prepare
Phase 2: Setup
Phase 3: Onboard
|You are here!|
You are currently in the set-up phase.
In this deployment scenario, you'll be guided through the steps on:
- Licensing validation
- Tenant configuration
- Network configuration
For the purpose of guiding you through a typical deployment, this scenario will only cover the use of Microsoft Endpoint Configuration Manager. Defender for Endpoint supports the use of other onboarding tools but won't cover those scenarios in the deployment guide. For more information, see Onboard devices to Microsoft Defender for Endpoint.
Check license state
Checking for the license state and whether it got properly provisioned, can be done through the admin center or through the Microsoft Azure portal.
To view your licenses, go to the Microsoft Azure portal and navigate to the Microsoft Azure portal license section.
Alternately, in the admin center, navigate to Billing > Subscriptions.
On the screen, you'll see all the provisioned licenses and their current Status.
Cloud Service Provider validation
To gain access into which licenses are provisioned to your company, and to check the state of the licenses, go to the admin center.
From the Partner portal, select Administer services > Office 365.
Clicking on the Partner portal link will open the Admin on behalf option and will give you access to the customer admin center.
Onboarding to Microsoft Defender for Endpoint is easy. From the navigation menu, select any item under the Endpoints section, or any Microsoft 365 Defender feature such as Incidents, Hunting, Action center, or Threat analytics to initiate the onboarding process.
From a web browser, navigate to the Microsoft 365 Defender portal.
Data center location
Microsoft Defender for Endpoint will store and process data in the same location as used by Microsoft 365 Defender. If Microsoft 365 Defender has not been turned on yet, onboarding to Microsoft Defender for Endpoint will also turn on Microsoft 365 Defender and a new data center location is automatically selected based on the location of active Microsoft 365 security services. The selected data center location is shown on the screen.
If the organization doesn't require the endpoints to use a Proxy to access the Internet, skip this section.
The Microsoft Defender for Endpoint sensor requires Microsoft Windows HTTP (WinHTTP) to report sensor data and communicate with the Microsoft Defender for Endpoint service. The embedded Microsoft Defender for Endpoint sensor runs in the system context using the LocalSystem account. The sensor uses Microsoft Windows HTTP Services (WinHTTP) to enable communication with the Microsoft Defender for Endpoint cloud service. The WinHTTP configuration setting is independent of the Windows Internet (WinINet) internet browsing proxy settings and can only discover a proxy server by using the following discovery methods:
- Transparent proxy
- Web Proxy Autodiscovery Protocol (WPAD)
If a Transparent proxy or WPAD has been implemented in the network topology, there is no need for special configuration settings. For more information on Microsoft Defender for Endpoint URL exclusions in the proxy, see the Proxy Service URLs section in this document for the URLs allow list or on Configure device proxy and Internet connectivity settings.
Manual static proxy configuration:
WinHTTP configured using netsh command
Suitable only for desktops in a stable topology (for example: a desktop in a corporate network behind the same proxy).
Configure the proxy server manually using a registry-based static proxy
Configure a registry-based static proxy to allow only Microsoft Defender for Endpoint sensor to report diagnostic data and communicate with Microsoft Defender for Endpoint services if a computer isn't permitted to connect to the Internet. The static proxy is configurable through Group Policy (GP). The group policy can be found under:
- Administrative Templates > Windows Components > Data Collection and Preview Builds > Configure Authenticated Proxy usage for the Connected User Experience and Telemetry Service
- Set it to Enabled and select Disable Authenticated Proxy usage
Open the Group Policy Management Console.
Create a policy or edit an existing policy based off the organizational practices.
Edit the Group Policy and navigate to Administrative Templates > Windows Components > Data Collection and Preview Builds > Configure Authenticated Proxy usage for the Connected User Experience and Telemetry Service.
Select Disable Authenticated Proxy usage.
Navigate to Administrative Templates > Windows Components > Data Collection and Preview Builds > Configure connected user experiences and telemetry.
Enter the Proxy Server Name.
The policy sets two registry values
TelemetryProxyServer as REG_SZ and
DisableEnterpriseAuthProxy as REG_DWORD under the registry key
The registry value
TelemetryProxyServer takes the following string format:
<server name or ip>:<port>
For example: 10.0.0.6:8080
The registry value
DisableEnterpriseAuthProxy should be set to 1.
Configure the proxy server manually using netsh command
Use netsh to configure a system-wide static proxy.
- This will affect all applications including Windows services which use WinHTTP with default proxy.
- Laptops that are changing topology (for example: from office to home) will malfunction with netsh. Use the registry-based static proxy configuration.
Open an elevated command line:
- Go to Start and type cmd.
- Right-click Command prompt and select Run as administrator.
Enter the following command and press Enter:
netsh winhttp set proxy <proxy>:<port>
For example: netsh winhttp set proxy 10.0.0.6:8080
Proxy Configuration for down-level devices
Down-Level devices include Windows 7 SP1 and Windows 8.1 workstations as well as Windows Server 2008 R2, and other server operating systems that have been onboarded previously using the Microsoft Monitoring Agent. These operating systems will have the proxy configured as part of the Microsoft Management Agent to handle communication from the endpoint to Azure. Refer to the Microsoft Management Agent Fast Deployment Guide for information on how a proxy is configured on these devices.
Proxy Service URLs
URLs that include v20 in them are only needed if you have Windows 10, version 1803 or Windows 11 devices. For example,
us-v20.events.data.microsoft.com is only needed if the device is on Windows 10, version 1803 or Windows 11.
If a proxy or firewall is blocking anonymous traffic, as Microsoft Defender for Endpoint sensor is connecting from system context, make sure anonymous traffic is permitted in the listed URLs.
The following downloadable spreadsheet lists the services and their associated URLs that your network must be able to connect to. Ensure there are no firewall or network filtering rules that would deny access to these URLs, or you may need to create an allow rule specifically for them.
|Spreadsheet of domains list||Description|
|Microsoft Defender for Endpoint URL list for commercial customers||Spreadsheet of specific DNS records for service locations, geographic locations, and OS for commercial customers.|
|Microsoft Defender for Endpoint URL list for Gov/GCC/DoD||Spreadsheet of specific DNS records for service locations, geographic locations, and OS for Gov/GCC/DoD customers.|
Phase 3: Onboard: Onboard devices to the service so that the Microsoft Defender for Endpoint service can get sensor data from them.
Submit and view feedback for