Share via

How I can setup some additional parameters of PPPoE dial-up connection?

NetworkM 1 Reputation point
2020-12-22T19:00:05.83+00:00

I’m using PPPoE dial-up connection which is created on Windows 10 Pro version 20H2.
Sometimes I have lot of difficulty to establish the connection to My access router.
I think that the problem is in My access router PPPoE interface settings because I can there to setup many details of PPPoE connection.
I unable (or I don’t know how) to setup those details of PPPoE connection on Windows 10 Pro.
Therefore I kindly ask anybody to provide me which parameters of PPPoE dial-up connection are setup by default when I create one on Windows 10 Pro.
Next parameters I can setup on My access router and those are default parameters when I create one on My access router:

connection.id: Test1c
connection.uuid: code number (specified by system)
connection.stable-id: Not setup
connection.type: pppoe
connection.interface-name: Not setup
connection.autoconnect: yes
connection.autoconnect-priority: 0
connection.autoconnect-retries: -1 (default)
connection.multi-connect: 0 (default)
connection.auth-retries: -1
connection.timestamp: 1608651779
connection.read-only: no
connection.permissions: Not setup
connection.zone: Not setup
connection.master: Not setup
connection.slave-type: Not setup
connection.autoconnect-slaves: -1 (default)
connection.secondaries: Not setup
connection.gateway-ping-timeout: 0
connection.metered: unknown
connection.lldp: default
connection.mdns: -1 (default)
connection.llmnr: -1 (default)

connection.wait-device-timeout: -1

ipv4.method: auto
ipv4.dns: Not setup
ipv4.dns-search: Not setup
ipv4.dns-options: Not setup
ipv4.dns-priority: 0
ipv4.addresses: Not setup
ipv4.gateway: Not setup
ipv4.routes: Not setup
ipv4.route-metric: -1
ipv4.route-table: 0 (unspecified)
ipv4.routing-rules: Not setup
ipv4.ignore-auto-routes: no
ipv4.ignore-auto-dns: no
ipv4.dhcp-client-id: Not setup
ipv4.dhcp-iaid: Not setup
ipv4.dhcp-timeout: 0 (default)
ipv4.dhcp-send-hostname: yes
ipv4.dhcp-hostname: Not setup
ipv4.dhcp-fqdn: Not setup
ipv4.dhcp-hostname-flags: 0x0 (none)
ipv4.never-default: no
ipv4.may-fail: yes

ipv4.dad-timeout: -1 (default)

ipv6.method: auto
ipv6.dns: Not setup
ipv6.dns-search: Not setup
ipv6.dns-options: Not setup
ipv6.dns-priority: 0
ipv6.addresses: Not setup
ipv6.gateway: Not setup
ipv6.routes: Not setup
ipv6.route-metric: -1
ipv6.route-table: 0 (unspecified)
ipv6.routing-rules: Not setup
ipv6.ignore-auto-routes: no
ipv6.ignore-auto-dns: no
ipv6.never-default: no
ipv6.may-fail: yes
ipv6.ip6-privacy: -1 (unknown)
ipv6.addr-gen-mode: stable-privacy
ipv6.ra-timeout: 0 (default)
ipv6.dhcp-duid: Not setup
ipv6.dhcp-iaid: Not setup
ipv6.dhcp-timeout: 0 (default)
ipv6.dhcp-send-hostname: yes
ipv6.dhcp-hostname: Not setup
ipv6.dhcp-hostname-flags: 0x0 (none)

ipv6.token: Not setup

ppp.noauth: yes
ppp.refuse-eap: no
ppp.refuse-pap: no
ppp.refuse-chap: no
ppp.refuse-mschap: no
ppp.refuse-mschapv2: no
ppp.nobsdcomp: no
ppp.nodeflate: no
ppp.no-vj-comp: no
ppp.require-mppe: no
ppp.require-mppe-128: no
ppp.mppe-stateful: no
ppp.crtscts: no
ppp.baud: 0
ppp.mru: 0
ppp.mtu: auto
ppp.lcp-echo-failure: 0

ppp.lcp-echo-interval: 0

pppoe.parent: Not setup
pppoe.service: Not setup
pppoe.username: userTest01
pppoe.password: <hidden>

pppoe.password-flags: 0 (none)

proxy.method: none
proxy.browser-only: no
proxy.pac-url: Not setup
proxy.pac-script: Not setup

Here I provide you simple setup interface of My access router PPPoE settings with default parameters:

  • Connect automatically with priority 0
  • All users may connect to this network Enabled
  • Automatically connect to VPN Not setup
  • Metered connection: Automatic
  • Parent interface: Access ethernet LAN port (specified by code)
  • Claim interface: Enabled
  • Authentication allowed methods: EAP, PAP, CHAP, MSCHAPv2, MSCHAP
  • Point-to-point encryption (MPPE): Not setup
  • BSD data compression: Enabled
  • Deflate data compression: Enabled
  • TCP header compression: Enabled
  • Send PPP echo packets: Disabled
  • Proxy: Not setup
  • IPv4 settings: Automatic (PPPoE)
  • IPv6 settings: Automatic (PPPoE)
Windows 10 Network
Windows 10 Network
Windows 10: A Microsoft operating system that runs on personal computers and tablets.Network: A group of devices that communicate either wirelessly or via a physical connection.
2,312 questions
0 comments

1 answer

Sort by: Most helpful
Most helpful Newest Oldest
  1. Gloria Gu 3,896 Reputation points
    2020-12-23T05:18:27.03+00:00

    @NetworkM Hi,

    Thank you for posting in Q&A!

    According to my research, if you want to configure the PPPoE connection manually on windows 10 computer, you will need the unique ID (username) and password assigned by your Internet Service Provider. The connection setting GUI would be like this:

    50691-16.png

    For the steps about set up and use PPPoE internet connections in Windows 10, please refer to:
    https://www.digitalcitizen.life/how-setup-and-use-pppoe-internet-connections-windows-10/

    However, there is a catch: to be able to use it, you have to connect to it each time you need it. If you want it to connect each time you start your computer or device automatically. In that case, you should read:
    https://www.digitalcitizen.life/how-automatically-dial-broadband-pppoe-connection-windows-10/

    Merry Christmas, Hope you have a nice day : )
    Gloria

    ============================================

    If the Answer is helpful, please click "Accept Answer" and upvote it.
    Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.
    https://learn.microsoft.com/en-us/answers/articles/67444/email-notifications.html