Note
Access to this page requires authorization. You can try signing in or changing directories.
Access to this page requires authorization. You can try changing directories.
The following table lists the metrics available for the Microsoft.ManagedNetworkFabric/networkDevices resource type.
Table headings
- Metric - The metric display name as it appears in the Azure portal.
- Name in Rest API - Metric name as referred to in the REST API.
- Advanced platform metrics - A premium, paid tier of platform metrics in Azure Monitor that provide more granular observability for Azure resources.
- Unit - Unit of measure.
- Aggregation - The default aggregation type. Valid values: Average, Minimum, Maximum, Total, Count.
- Dimensions - Dimensions available for the metric.
- Time Grains - Intervals at which the metric is sampled. For example,
PT1Mindicates that the metric is sampled every minute,PT30Mevery 30 minutes,PT1Hevery hour, and so on. - DS Export -S Whether the metric is exportable to Azure Monitor Logs via Diagnostic Settings.
For information on exporting metrics, see - Metrics export using data collection rules and Create diagnostic settings in Azure Monitor.
For information on metric retention, see Azure Monitor Metrics overview.
For a list of supported logs, see Supported log categories - Microsoft.ManagedNetworkFabric/networkDevices
Category: ACL State Counters
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Acl Matched Packets Count of the number of packets matching the current ACL entry. |
AclMatchedPackets |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, AclSetName, AclEntrySequenceId, AclSetType |
PT1M | Yes |
Category: BGP Status
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| BGP Peer Status Operational state of the BGP peer. State is represented in numerical form. Idle : 1, Connect : 2, Active : 3, Opensent : 4, Openconfirm : 5, Established : 6 |
BgpPeerStatus |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, IpAddress |
PT1M | Yes |
Category: Component Operational State
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Component Operational State The current operational status of the component. |
ComponentOperStatus |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
Category: Disk Utilization
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Disk Available Size Current available size of the disk in bytes. |
DiskAvailableSize |
No | Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, MountPointName |
PT1M | Yes |
| Disk Size Current size of the disk in bytes. |
DiskSize |
No | Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, MountPointName |
PT1M | Yes |
| Disk Utilization Percent Percentage value of current utilized disk space compared to the total disk size. |
DiskUtilPercent |
No | Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, MountPointName |
PT1M | Yes |
| Disk Utilized Size Current utilized disk space in bytes. |
DiskUtilSize |
No | Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, MountPointName |
PT1M | Yes |
Category: Interface QoS State Counters
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Interface Dropped Octets Number of octets dropped by the queue due to overrun, that is tail-drop or AMQ (RED, WRED, etc) induced drops as indicated by the attached queue-management-profile. |
IfDroppedOctets |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Dropped Octets Rate The calculated drop rate of octets from the queue. |
IfDroppedOctetsRate |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Dropped Pkts Number of packets dropped by the queue due to overrun, that is tail-drop or AMQ (RED, WRED, etc) induced drops as indicated by the attached queue-management-profile. |
IfDroppedPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Dropped Pkts Rate The calculated drop rate of packets from the queue. |
IfDroppedPktsRate |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
Category: Interface State
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Interface Admin Status Interface Admin Status of the device. Possible values are Up: 1, Down: 2, Testing: 3. |
InterfaceAdminStatus |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | InterfaceName |
PT1M | Yes |
| Interface Operational State The current operational state of the interface. State is represented in numerical form. Up: 0, Down: 1, Lower_layer_down: 2, Testing: 3, Unknown: 4, Dormant: 5, Not_present: 6. |
InterfaceOperStatus |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
Category: Interface State Counters
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Eth Interface In CRC Errors The total number of frames received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error) |
IfEthInCrcErrors |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Eth Interface In Fragment Frames The total number of frames received that were less than 64 octets in length (excluding framing bits but including FCS octets) and had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error). |
IfEthInFragmentFrames |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Eth Interface In Jabber Frames Number of jabber frames received on the interface. Jabber frames are typically defined as oversize frames which also have a bad CRC. |
IfEthInJabberFrames |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Eth Interface In MAC Control Frames MAC layer control frames received on the interface |
IfEthInMacControlFrames |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Eth Interface In MAC Pause Frames MAC layer PAUSE frames received on the interface |
IfEthInMacPauseFrames |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Eth Interface In Maxsize Exceeded The total number frames received that are well-formed dropped due to exceeding the maximum frame size on the interface. |
IfEthInMaxsizeExceeded |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Eth Interface In Oversize Frames The total number of frames received that were longer than 1518 octets (excluding framing bits, but including FCS octets) and were otherwise well formed. |
IfEthInOversizeFrames |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Eth Interface Out MAC Control Frames MAC layer control frames sent on the interface. |
IfEthOutMacControlFrames |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Eth Interface Out MAC Pause Frames MAC layer PAUSE frames sent on the interface. |
IfEthOutMacPauseFrames |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Broadcast Pkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, that were addressed to a broadcast address at this sub-layer. |
IfInBroadcastPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Discards The number of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. |
IfInDiscards |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Errors For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
IfInErrors |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Errors Rate For packet-oriented interfaces, the rate of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. |
IfInErrorsRate |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In FCS Errors Number of received packets which had errors in the frame check sequence (FCS), i.e., framing errors. |
IfInFcsErrors |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Multicast Pkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, that were addressed to a multicast address at this sub-layer. For a MAC-layer protocol, this includes both Group and Functional addresses. |
IfInMulticastPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Octets The total number of octets received on the interface, including framing characters. |
IfInOctets |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Pkts The total number of packets received on the interface, including all unicast, multicast, broadcast and bad packets etc. |
IfInPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Unicast Pkts The number of packets, delivered by this sub-layer to a higher (sub-)layer, that were not addressed to a multicast or broadcast address at this sub-layer. |
IfInUnicastPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Broadcast Pkts The total number of packets that higher-level protocols requested be transmitted, and that were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. |
IfOutBroadcastPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Discards The number of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. |
IfOutDiscards |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Errors For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. |
IfOutErrors |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Errors Rate For packet-oriented interfaces, the rate of outbound packets that could not be transmitted because of errors. |
IfOutErrorsRate |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Multicast Pkts The total number of packets that higher-level protocols requested be transmitted, and that were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC-layer protocol, this includes both Group and Functional addresses. |
IfOutMulticastPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Octets The total number of octets transmitted out of the interface, including framing characters. |
IfOutOctets |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Pkts The total number of packets transmitted out of the interface, including all unicast, multicast, broadcast, and bad packets etc. |
IfOutPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Unicast Pkts The total number of packets that higher-level requested be transmitted, and that were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. |
IfOutUnicastPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
Category: Interface State Rate
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Interface In Bits Rate The calculated received rate of the interface, measured in bits per second. |
IfInBitsRate |
No | BitsPerSecond | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Bits Rate Percent Percentage value of current input bits rate on the interface compared to the port speed. |
IfInBitsRatePercent |
No | Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Discards Rate The rate of inbound packets that were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. |
IfInDiscardsRate |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface In Pkts Rate The calculated received rate of the interface, measured in packets per second. |
IfInPktsRate |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Bits Rate The calculated transmitted rate of the interface, measured in bits per second. |
IfOutBitsRate |
No | BitsPerSecond | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Bits Rate Percent Percentage value of current output bits rate on the interface compared to the port speed. |
IfOutBitsRatePercent |
No | Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Discards Rate The rate of outbound packets that were chosen to be discarded even though no errors had been detected to prevent their being transmitted. |
IfOutDiscardsRate |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Interface Out Pkts Rate The calculated transmitted rate of the interface, measured in packets per second. |
IfOutPktsRate |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
Category: LACP State Counters
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Lacp Errors Number of LACPDU illegal packet errors. |
LacpErrors |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Lacp In Pkts Number of LACPDUs received. |
LacpInPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Lacp Out Pkts Number of LACPDUs transmitted. |
LacpOutPkts |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Lacp Rx Errors Number of LACPDU receive packet errors. |
LacpRxErrors |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Lacp Tx Errors Number of LACPDU transmit packet errors. |
LacpTxErrors |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Lacp Unknown Errors Number of LACPDU unknown packet errors. |
LacpUnknownErrors |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
Category: Layer 1 Metrics
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| L1 - Interface FEC Corrected Codewords FEC Corrected Codewords on the interface. |
IfEthPhyIngFecCCW |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| L1 - Interface FEC Pre-FEC BER FEC Pre-FEC Bit Error Rate on the interface. |
IfEthPhyIngFecPreFecBer |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| L1 - Interface FEC Uncorrected Codewords FEC Uncorrected Codewords on the interface. |
IfEthPhyIngFecUCW |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| L1 - Interface PCS Error Blocks PCS Error Blocks on the interface. |
IfEthPhyIngPcsErrBlcks |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| L1 - Lane Fault Rx CDR LoL lane fault reception CDR LoL (Clock and Data Recovery - Loss of Lock). Possible values are 0 (no fault), 1 (fault). |
LaneFaultRxCdrLol |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| L1 - Lane Fault Rx LoS lane fault reception LoS (Loss of Signal). Possible values are 0 (no fault), 1 (fault). |
LaneFaultRxLos |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| L1 - Lane Fault Tx CDR LoL lane fault transmission CDR LoL (Clock and Data Recovery - Loss of Lock). Possible values are 0 (no fault), 1 (fault). |
LaneFaultTxCdrLol |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| L1 - Lane Fault Tx Failure lane fault transmission failures. Possible values are 0 (no fault), 1 (fault). |
LaneFaultTxFailure |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| L1 - Lane Fault Tx LoS lane fault transmission LoS (Loss of Signal). Possible values are 0 (no fault), 1 (fault). |
LaneFaultTxLos |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| L1 - Transceiver Input Power Instant Instantaneous value of the input power for the transceiver (watts). |
TransceiverInputPowerInstant |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| L1 - Transceiver Laser Bias Current Instant Instantaneous value of the laser bias current for the transceiver (amps). |
TransceiverLaserBiasCurrentInstant |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| L1 - Transceiver Output Power Instant Instantaneous value of the output power for the transceiver (watts). |
TransceiverOutputPowerInstant |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| L1 - Transceiver Supply Voltage Instantaneous value of the supply voltage for the transceiver (volts). |
TransceiverSupplyVoltage |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
Category: LLDP State Counters
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Lldp Frame In The number of lldp frames received. |
LldpFrameIn |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Lldp Frame Out The number of frames transmitted out. |
LldpFrameOut |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
| Lldp Tlv Discards Lldp Tlv Discards |
LldpTlvDiscard |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | InterfaceName, FabricId |
PT1M | Yes |
| Lldp Tlv Unknown The number of frames received with unknown TLV. |
LldpTlvUnknown |
No | Count | Average, Minimum, Maximum, Total (Sum), Count | FabricId, InterfaceName |
PT1M | Yes |
Category: Resource Utilization
| Metric | Name in REST API | Advanced platform metrics | Unit | Aggregation | Dimensions | Time Grains | DS Export |
|---|---|---|---|---|---|---|---|
| Cpu Utilization Avg Avg cpu utilization. The Avg value of the percentage measure of the statistic over the time interval. |
CpuUtilizationAvg |
No | Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Cpu Utilization Instant Instantaneous Cpu utilization. The instantaneous value of the percentage measure of the statistic over the time interval. |
CpuUtilizationInstant |
No | Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Cpu Utilization Max Max cpu utilization. The maximum value of the percentage measure of the statistic over the time interval. |
CpuUtilizationMax |
No | Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Cpu Utilization Min Min cpu utilization. The minimum value of the percentage measure of the statistic over the time interval. |
CpuUtilizationMin |
No | Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Fan Speed Current fan speed. |
FanSpeed |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Memory Available The available memory physically installed, or logically allocated to the component. |
MemoryAvailable |
No | Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Memory Free Memory that is not used and is available for allocation. |
MemoryFree |
No | Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Memory Utilization Percentage The percentage of memory currently in use by processes running on the component, not considering reserved memory that is not available for use. |
MemoryUtilizationPercentage |
No | Percent | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Memory Utilized The memory currently in use by processes running on the component, not considering reserved memory that is not available for use. |
MemoryUtilized |
No | Bytes | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Power Supply Max Power Capacity Maximum power capacity of the power supply (watts). |
PowerSupplyCapacity |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Power Supply Input Current The input current draw of the power supply (amps). |
PowerSupplyInputCurrent |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Power Supply Input Voltage Input voltage to the power supply (volts). |
PowerSupplyInputVoltage |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Power Supply Output Current The output current supplied by the power supply (amps) |
PowerSupplyOutputCurrent |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Power Supply Output Power Output power supplied by the power supply (watts) |
PowerSupplyOutputPower |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Power Supply Output Voltage Output voltage supplied by the power supply (volts). |
PowerSupplyOutputVoltage |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Temperature Instantaneous The instantaneous value of temperature in degrees Celsius of the component. |
TemperatureInstant |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |
| Temperature Max Max temperature in degrees Celsius of the component. The maximum value of the statistic over the sampling period. |
TemperatureMax |
No | Unspecified | Average, Minimum, Maximum, Total (Sum), Count | FabricId, ComponentName |
PT1M | Yes |