Azure Blob Storage frequently asked questions

Once you configure a policy, it can take up to 24 hours to go into effect. Once the policy is in effect, the time taken for actions to run may vary depending on the size of the storage account and the operations performed.

The updated policy takes up to 24 hours to go into effect. Once the policy is in effect, the time that it takes for the actions to run varies depending on size of the storage account and operations that are performed. If the update is to disable or delete a rule, and enableAutoTierToHotFromCool was used, then auto-tiering to the hot tier will still happen. For example, set a rule including enableAutoTierToHotFromCool based on last access. If the rule is disabled or deleted, and a blob is currently in the cool or cold tier and then accessed, it will move back to the hot tier as that is applied on access outside of lifecycle management. The blob won't then move from hot to cool or cold given the lifecycle management rule is disabled or deleted. The only way to prevent autoTierToHotFromCool is to turn off last access time tracking.

Depending on the size and the number of objects that are in a storage account, more than one run might be required to process all of the objects. You can also check the storage resource logs to see if the operations are being performed by the lifecycle management policy.

Check to see if data protection features such as soft delete or versioning are enabled on the storage account. Even if the policy is deleting the blobs, those blobs might still exist in a soft deleted state or as an older version depending on how these features are configured.

If there's a lifecycle management policy in effect for the storage account, then rehydrating a blob by changing its tier can result in a scenario where the lifecycle policy moves the blob back to the archive tier. This can happen if the last modified time, creation time, or last access time is beyond the threshold set for the policy. There are three ways to prevent this from happening:

• Add the daysAfterLastTierChangeGreaterThan condition to the tierToArchive action of the policy. See Use lifecycle management policies to archive blobs.

• Disable the rule that affects this blob temporarily to prevent it from being archived again. Re-enable the rule when the blob can be safely moved back to archive tier.

• If the blob needs to stay in the hot, cool, or cold tier permanently, copy the blob to another location where the lifecycle manage policy isn't in effect.

The blob prefix match field of a policy is a full or partial blob path, which is used to match the blobs you want the policy actions to apply to. The path must start with the container name. If no prefix match is specified, then the policy will apply to all the blobs in the storage account. The format of the prefix match string is [container name]/[blob name].
Keep in mind the following points about the prefix match string:

• A prefix match string like container1/ applies to all blobs in the container named container1. A prefix match string of container1, without the trailing forward slash character (/), applies to all blobs in all containers where the container name begins with the string container1. The prefix will match containers named container11, container1234, container1ab, and so on.
• A prefix match string of container1/sub1/ applies to all blobs in the container named container1 that begin with the string sub1/. For example, the prefix will match blobs named container1/sub1/test.txt or container1/sub1/sub2/test.txt.
• The asterisk character * is a valid character in a blob name. If the asterisk character is used in a prefix, then the prefix will match blobs with an asterisk in their names. The asterisk doesn't function as a wildcard character.
• The question mark character ? is a valid character in a blob name. If the question mark character is used in a prefix, then the prefix will match blobs with a question mark in their names. The question mark doesn't function as a wildcard character.
• The prefix match considers only positive (=) logical comparisons. Negative (!=) logical comparisons are ignored.
• The prefix matching operates in a case-sensitive manner.

Unfortunately, there's no way to track the time at which the policy will be executing, as it's a background scheduling process. However, the platform will run the policy once per day.

The daily inventory rule is designed to run once every day. Additionally, there is a weekly inventory rule scheduled for every Sunday.

While we strive to provide a consistent experience, we can't guarantee the exact execution time for each run. The inventory rule's execution time might vary. For example, if today's policy is scheduled for 12:05 am, it might kick in at 12:07 am, 12:15 am, or any other time on the following day.

Blob Inventory report produces three types of files. See Inventory files. Existing customers using blob inventory might see a change in the number of inventory files, from one file to multiple files. Today, we already have manifest file that provides the list of files. This behavior remains unchanged, so these files are listed in the manifest file.

The change was implemented to enhance blob inventory performance, particularly for large storage accounts containing over five million objects. Now, results are written in parallel to multiple files, eliminating the bottleneck of using a single inventory file. This change was prompted by customer feedback, as they reported difficulties in opening and working with the excessively large single inventory file.

As a user, this change has a positive impact on your experience with blob inventory runs. It's expected to enhance performance and reduce the overall running time. However, to fully benefit from this improvement, you must ensure that your code is updated to process multiple results files instead of just one. This adjustment aligns your code with the new approach and optimizes the handling of inventory data.

No, existing data isn't affected. Only new blob inventory results have multiple inventory files.

No, the change happens seamlessly.

Your required actions depend on how you currently process blob inventory results:

• If your current processing assumes a single inventory results file, then you need to modify your code to accommodate multiple inventory results files.

• However, if your current processing involves reading the list of results files from the manifest file, there's no need to make any changes to how you process the results. The existing approach continues to work seamlessly with the updated feature.

This isn't recommended, but it's possible. Please work through your support channels to ask to turn off this feature.

Please work through your current account team and support channels.

This change will start gradual rollout starting September 1, 2023.

No. Azure Compute supports the metrics on disks. For more information, see Per disk metrics for Managed and Unmanaged Disks.

Some Azure metrics charts, such as the ones that display availability and latency data, use a dashed line to indicate that there's a missing value (also known as null value) between two known time grain data points. For example, if in the time selector you picked 1 minute time granularity, but the metric was reported at 07:26, 07:27, 07:29, and 07:30, then a dashed line connects 07:27 and 07:29 because there's a minute gap between those two data points. A solid line connects all other data points. The dashed line drops down to zero when the metric uses count and sum aggregation. For the avg, min or max aggregations, a dashed line connects the two nearest known data points. Also, when the data is missing on the rightmost or leftmost side of the chart, the dashed line expands to the direction of the missing data point.

You can configure a resource health alert based on the Azure Resource Health service to track the availability of your storage account. If there are no transactions on the account, then the alert reports based on the health of the Storage cluster where your storage account is located.

The blob capacity and blob count metric are emitted hourly. A background process computes these metrics and updates them multiple times a day.

Analytics logs have records of all read, write, list, and delete operations with successful and failed requests across all operations. Analytics logs are best-effort and no ordering is guaranteed.

The change feed is a solution that provides transactional log of successful mutations or changes to your account such as blob creation, modification, and deletions. The change feed guarantees all events to be recorded and displayed in the order of successful changes per blob, thus you do not have to filter out noise from a huge volume of read operations or failed requests. The change feed is fundamentally designed and optimized for application development that requires certain guarantees.

You can leverage both features as the change feed and Blob storage events provide the same information with the same delivery reliability guarantee, with the main difference being the latency, ordering, and storage of event records. The change feed publishes records to the log within few minutes of the change and also guarantees the order of change operations per blob. Storage events are pushed in real time and might not be ordered. Change feed events are durably stored inside your storage account as read-only stable logs with your own defined retention, while storage events are transient to be consumed by the event handler unless you explicitly store them. With change feed, any number of your applications can consume the logs at their own convenience using blob APIs or SDKs.

Yes. Storage account network security rules, including IP-based and VNET firewalls, are supported for the static website endpoint, and may be used to protect your website.

No. A static website only supports anonymous public read access for files in the $web container.

You can configure a custom domain with a static website by using Azure Content Delivery Network (Azure CDN). Azure CDN provides consistent low latencies to your website from anywhere in the world.

You can configure a custom SSL certificate with a static website by using Azure CDN. Azure CDN provides consistent low latencies to your website from anywhere in the world.

You can configure the host header for a static website by using Azure CDN - Verizon Premium. We'd be interested to hear your feedback here.

A 404 error can happen if you refer to a file name by using an incorrect case. For example: Index.html instead of index.html. File names and extensions in the url of a static website are case-sensitive even though they're served over HTTP. This can also happen if your Azure CDN endpoint isn't yet provisioned. Wait up to 90 minutes after you provision a new Azure CDN for the propagation to complete.

In the Azure portal, open the static website configuration page of your account and locate the name and extension that is set in the Index document name field. Ensure that this name is exactly the same as the name of the file located in the $web container of the storage account. File names and extensions in the url of a static website are case-sensitive even though they're served over HTTP.

No, if you need to search within your blob data, use query acceleration or Azure search.

Blob index tags only support string data types and querying returns results with lexicographical ordering. For numbers, zero pad the number. For dates and times, store as an ISO 8601 compliant format.

No, Resource Manager tags help organize control plane resources such as subscriptions, resource groups, and storage accounts. Index tags provide blob management and discovery on the data plane.

Storage capacity for Blob Storage is billed in units of the average daily amount of data stored, in gigabytes (GB), over a monthly period. For example, if you consistently used 10 GB of storage for the first half of the month, and none for the second half of the month, you would be billed for your average usage of 5 GB of storage.

Next steps

You can learn more about Azure Blob Storage by visiting the following links:

• Introduction to Azure Storage
• What is Azure Blob Storage