Reset Surface Pro without Password or Recovery Key

Hi Beth Barentsen,

Thank you for reaching Microsoft Community.

May I know first the exact model of your Surface Pro since the post was moved under Surface Pro 1stgen by another moderator? See this page for reference: Find out which Surface model you have - Microsoft Support. You may also enter the serial number here to get the Surafce model that you have: Check Warranty Page - ROBO SelfServe Portal (surface.com).

Anyway, to reset the Surface without the recovery key or password, you can do a clean install of Windows on the device using the Surafce Recovery Image through USB Recovery. This option will reimage the entire device and reload Windows including the drivers and firmware. It is the most complete form of Reset and it will wipe out everything on the device. You will need also a 16GB/32GB of flash drive that must be formatted into FAT32 prior to downloading the Recovery Image. See the steps below for guidance.

How to Download, Create and Use a USB recovery drive

To download the Recovery Image:

• You'll another working device running on Windows.

1. Visit the page to Download the recovery image for your Surface
2. Sign in with your Microsoft Account
3. From the list of Surface devices available, select the device that you need a recovery image for
   Please note that while you will only be presented with devices that are currently registered on your account, you will also be presented with the option to get an image for a different type of device. If you try to use this option, you will be prompted to enter the serial number for that device
4. Download the recovery image using the button on the page
5. When the download bar pops up at the bottom of your screen, save the file in a location you will be able to find it.

 Format USB Drive:

• Note: Formatting a recovery drive will erase anything that is already stored on your USB drive. Make sure to transfer any important data from your USB drive to another storage device before using it to create a Surface USB recovery drive.

1. Insert your USB drive into the USB port of your PC.
2. From the desktop, open File Explorer
3. Tap and hold or right-click on the USB drive and choose Format
4. Select FAT32 as the file system and enter a Volume label to name the USB drive, such as RECOVERY, and then tap or click Start
5. Tap or click OK to erase the contents of the USB drive
6. Tap or click OK when the format is complete

Create a recovery drive:

1. On your Surface or PC, open recovery image that you downloaded by double-clicking it or right click then select Extract and then Extract all.
2. Select the USB drive you formatted earlier for the location and click Extract.

Use a USB recovery drive to reset your Surface:

1. Shutdown the Surface
2. Insert the USB recovery drive into the USB port
3. Press and hold the volume-down (-) rocker
4. Press and release the power button
5. When the Surface logo appears, release the volume-down (-) rocker
6. Surface will start the recovery software on the USB recovery drive
7. When prompted, choose your language options and keyboard layout
8. Select Troubleshoot
9. Select Recover from a Drive. Choose Remove Everything and Fully Clean the Drive. Recovering this PC.
10. If prompted, select Repartition the drives
11. If prompted for BitLocker Key, tap Skip this Drive

Kind regards,

Marrion

Hi Beth Barentsen,

We haven't heard from you in, so we assume that your issue has already been resolved. We will not be monitoring this thread moving forward so, if you need further assistance, please create a new thread to discuss these concerns by clicking this link: Create a new question or start a discussion (microsoft.com)

Thank you for understanding. 

Kind regards,
Marrion