Blue Screen Bug Check 0x116: VIDEO_TDR_ERROR

Boot into Safe Mode, then use System Restore to set Windows back to a point before this problem became apparent.

Bug Check 0x116: VIDEO_TDR_ERROR

This indicates that an attempt to reset the display driver and recover from a timeout failed.

Try different graphics card drivers.

---

"A programmer is just a tool which converts caffeine into code" CLIP- Stellvertreter http://www.winvistaside.de/

Hi,

References to Vista also apply to Windows 7.

This is my generic how to for proper driver updates :

This utility makes it easy to see which versions are loaded :

DriverView - Free - utility displays the list of all device drivers currently loaded on your system.

For each driver in the list, additional useful information is displayed: load address of the driver,

description, version, product name, company that created the driver, and more.

http://www.nirsoft.net/utils/driverview.html

For Drivers check System Maker as fallbacks and Device Maker's which are the most current.

Control Panel - Device Manager - Display Adapter - write down the make and complete model

of your video adapter - double click - Driver's tab - write down the version info. Now click UPdate

Driver (this may not do anything as MS is far behind certifying drivers) - then Right Click -

Uninstall - REBOOT this will refresh the driver stack.

Repeat that for Network - Network Card (NIC), Wifi, Sound, Mouse and Keyboard if 3rd party

with their own software and drivers and any other major device drivers you have.

Now go to System Maker's site (Dell, HP, Toshiba as examples) (as rollback) and then Device

Maker's site (Realtek, Intel, Nvidia, ATI as examples) and get their latest versions. (Look for

BIOS, Chipset and software updates at System Maker's site while there.)

Download - SAVE - go to where you put them - Right Click - RUN AD ADMIN - REBOOT after

each installation.

Always check in Device Manager - Drivers tab to be sure the version you are installing actually

shows up. This is because some drivers rollback before the latest is installed (sound drivers

particularly do this) so install a driver - reboot - check to be sure it is installed and repeat as

needed.

Repeat at Device Makers - BTW at Device Makers DO NOT RUN THEIR SCANNER - check

manually by model.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.

http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

Installing and updating drivers in Windows 7 (updating drivers manually using the methods above

is preferred to ensure the latest drivers from System maker and Device makers are found)

http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html

If you update drivers manually then it is a good idea to disable Driver Installations in Windows

Updates, this leaves Windows Updates ON however it will not install drivers which will usually be

older and cause issues. If Updates suggests a new driver then HIDE it (Right Click on it) and then

go look for new ones manually if you wish.

How To Disable Automatic Driver Installation In Windows Vista - Drivers

http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/

http://technet.microsoft.com/en-us/library/cc730606(WS.10).aspx

Hope this helps.

---

Rob Brown - MS MVP - Windows Desktop Experience : Bicycle - Mark Twain said it right.

Hi,

Check this thread for information on using BlueScreenView, MyEventViewer and other methods to

troubleshoot BlueScreens - top 3 replies.

http://social.answers.microsoft.com/Forums/en-US/w7repair/thread/c675b7b8-795f-474d-a1c4-6b77b3fcd990

---

References to Vista also apply to Windows 7.

Have you updated your display/video or other major drivers lately - check in Control Panel -

Windows Updates to see if a driver has been loaded there. Use the generic troubleshooter below

and when you get to the driver section use the methods in the next message and then return to

the troubleshooter as needed. In rare cases the antivirus/antispyware/security programs can

cause this error.

Also check with System Maker and Video/Display adapter's Support as there could be known

issues - also check in their forums.

BCCode : 116    0x00000116

The VIDEO_TDR_ ERROR bug check has a value of 0x00000116. This indicates that an attempt

to reset the display driver and recover from a timeout failed.

BCCode: 116     0x00000116  <-- read thishttp://www.faultwire.com/solutions-fatal\_error/Attempt-to-reset-the-display-driver-and-recover-from-0x00000116-\*1275.html

---

The inclusion the 116 error code in the troubleshooter is only coincidence and holds no specific

meaning (other than driver caused bluescreens do occur with some frequency).

Look in the Event Viewer to see if anything is reported about those.

http://www.computerperformance.co.uk/vista/vista\_event\_viewer.htm

MyEventViewer - Free - a simple alternative to the standard event viewer ofWindows. TIP - Options - Advanced Filter allows you to see a time frame instead of the whole file.http://www.nirsoft.net/utils/my\_event\_viewer.html

---

Here are some methods to possibly fix the blue screen issue. If you could give the Blue Screen

info that would help. Such as the BCC and the other 4 entries on the lower left. And any other

error information such as STOP codes and info such as IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples :

BCCode: 116

BCP1: 87BC9510

BCP2: 8C013D80

BCP3: 00000000

BCP4: 00000002

or in this format :

Stop: 0x00000000 (oxoooooooo oxoooooooo oxooooooooo oxoooooooo)

tcpip.sys - Address 0x00000000 base at 0x000000000 DateStamp 0x000000000

This is an excellent tool for posting Blue Screen Error InformationBlueScreenView scans all your minidump files created during 'blue screen of death'crashes, and displays the information about all crashes in one table - Free

http://www.nirsoft.net/utils/blue\_screen\_view.html

Many BlueScreens are caused by old or corrupted drivers, especially video drivers however

there are other causes.

You can do these in Safe Mode if needed or from Command Prompt from Vista DVD or

Recovery Options if your system has that installed by the maker.

How to Boot to the System Recovery Options in Windows 7

http://www.sevenforums.com/tutorials/668-system-recovery-options.html

You can try a System Restore back to a point before the problem started if there is one.

How to Do a System Restore in Windows 7

http://www.sevenforums.com/tutorials/700-system-restore.html

---

Start - type this in Search Box ->  COMMAND   find at top and RIGHT CLICK  -  RUN AS ADMIN

Enter this at the prompt - sfc /scannow

How to Repair Windows 7 System Files with System File Checker

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program

generates in Windows Vista cbs.log (and Windows 7)

http://support.microsoft.com/kb/928228

The log might give you the answer if there was a corrupted driver. (Does not tell all the possible

driver issues).

Also run CheckDisk so we can rule out corruption as much as possible.

How to Run Check Disk at Startup in Windows 7

http://www.sevenforums.com/tutorials/433-disk-check.html

---

Often updating drivers will help, usually Video, Sound, Network Card  (NIC), WiFi, 3rd party

keyboard and mouse, as well as other major device drivers.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.

http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

Installing and updating drivers in Windows 7 (updating drivers manually using the methods above is

preferred to ensure the latest drivers from System maker and Device makers are found)

http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html

How To Disable Automatic Driver Installation In Windows Vista - Drivers

http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/

http://technet.microsoft.com/en-us/library/cc730606(WS.10).aspx

---

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart

unexpectedly

http://support.microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, STOP Errors (and Windows 7)

http://www.chicagotech.net/vista/vistabluescreen.htm

Understanding and Decoding BSOD (blue screen of death) Messages

http://www.taranfx.com/blog/?p=692

Windows - Troubleshooting Blue Screen Errors

http://kb.wisc.edu/page.php?id=7033

---

In some cases this might be required.

StartUp Repair from Recovery Options or Windows 7 disk

How to Run a Startup Repair in Windows 7

http://www.sevenforums.com/tutorials/681-startup-repair.html

How to Boot to the System Recovery Options in Windows 7

http://www.sevenforums.com/tutorials/668-system-recovery-options.html

How to Create a Windows 7 System Repair Disc

http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html

How to Do a Repair Install to Fix Windows 7

http://www.sevenforums.com/tutorials/3413-repair-install.html

Hope this helps.

---

Rob Brown - MS MVP - Windows Desktop Experience : Bicycle - Mark Twain said it right.