BSOD - BCCode: 1000007e

Smitty64

In addition to the excellent advice already offered. please refer to the link below fo additional troubleshooting steps.

Log Name:      Application

Source:        Microsoft-Windows-WMI

Date:          6/7/2014 5:01:05 PM

Event ID:      10

Task Category: None

Level:         Error

Keywords:      Classic

User:          N/A

Computer:      user-PC

Description:

Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected.

*Resolution* See link.

Event ID 10 is logged in the Application log after you install  Service Pack 1 for Windows 7 or Windows Server 2008 R2.

http://support.microsoft.com/kb/2545227/en-us

Hi,

Definitely contact whoever serviced your computer because they definitely did not check

it out carefully enough and this may be hardware. Regardless they should have resolved

the issues before returning the unit.

Check these KB articles :

"Stop 0x0000007E" or "Stop 0x00000050" Stop error message in Windows 7 or Windows Server

2008 R2

http://support.microsoft.com/kb/979538 

"Stop 0x0000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLED" error when the GPU

is under heavy load conditions in Windows 7 or Windows Server 2008 R2

http://support.microsoft.com/kb/983615

---

Resolving stop (blue screen) errors in Windows 7 - has a section for if you can or can't start Windows.

http://windows.microsoft.com/en-us/windows7/Resolving-stop-blue-screen-errors-in-Windows-7 

See this thread for information on using BlueScreenView, MyEventViewer, and other methods

to troubleshoot BlueScreens - top 3 replies (+1 other).

http://answers.microsoft.com/en-us/windows/forum/windows_7-system/sometimes-i-get-a-blue-screen-when-using-ie-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

We can analyze the minidumps if you make them available from the OneDrive or other file

sharing sites (such as MediaFire). If you have problems uploading the minidumps copy

them to the Desktop or the Documents folder and upload them from there.

Adding files to your OneDrive

http://windows.microsoft.com/en-us/windows-8/getting-started-onedrive-tutorial

One-Drive - Share files and folders and change permissions

http://windows.microsoft.com/en-us/onedrive/share-file-folder

Zip or upload the contents of C:\Windows\minidump

Use OneDrive to upload collected files

http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65

---

References to Vista also apply to Windows 7.BCCode: 7E      0x0000007E  which is also 0x1000007EThis error is usually a driver issue and display adapter (video) driver is the most suspect

though it could be others. Antivirus/antispyware/security programs, hardware (heat) and

major software issues can also cause the error. When you get to the driver section of the

troubleshooter use my generic methods in the next message and then return to the

troubleshooter if needed.

Have you added hardware recently or updated drivers? Be sure to look in Control Panel -

Windows Updates to see if any drivers were updated there. Other lessor possibilities

include antivirus/anti-spyware/security programs.

When you get to the driver and memory sections of the troubleshooter refer to the next

message to update drivers and test memory and then refer back to the troubleshooter

if needed.

=======================================================

BCCode: 7E      0x0000007E  which is also 0x1000007E SYSTEM_THREAD_EXCEPTION_NOT_HANDLEDThe SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug check has a value of 0x0000007E. This bug check indicates that a system thread generated an exception that the error handler did not catch.

Important Info If You Have Received a STOP CodeIf you received a blue screen error, or stop code, the computer has shut down abruptly to protect itself from data loss. A hardware device, its driver, or related software might have caused this error. If your copy of Windows came with your computer, call the manufacturer of your computer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact info for Microsoft or your computer manufacturer, Contact Support.

If you have experience with computers and want to try to recover from this error, follow the steps provided in the Microsoft article Resolving STOP (Blue Screen) Errors in Windows.

These actions might prevent an error like this from happening again:

1. Download and install updates and device drivers for your computer from Windows Update.
2. Scan your computer for computer viruses.
3. Check your hard disk for errors.

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED Parameters

The following parameters appear on the blue screen.

CauseThe SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug check is a very common bug check. To interpret it, you must identify which exception was generated.

Common exception codes include the following:

• 0x80000002: STATUS_DATATYPE_MISALIGNMENT indicates an unaligned data reference was encountered.
• 0x80000003: STATUS_BREAKPOINT indicates a breakpoint or ASSERT was encountered when no kernel debugger was attached to the system.
• 0xC0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation occurred.

For a complete list of exception codes, see the Ntstatus.h file that is located in the inc directory of the Microsoft Windows Driver Kit (WDK).

Resolution

If you are not equipped to debug this problem, you should use some basic troubleshooting techniques.

• Make sure you have enough disk space.
• If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
• Try changing video adapters.
• Check with your hardware vendor for any BIOS updates.
• Disable BIOS memory options such as caching or shadowing.

If you plan to debug this problem, you might find it difficult to obtain a stack trace. Parameter 2 (the exception address) should identify the driver or function that caused this problem.

If exception code 0x80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system was started with the /NODEBUG switch. This problem should rarely occur. If it occurs repeatedly, make sure that a kernel debugger is connected and the system is started with the /DEBUG switch.

If exception code 0x80000002 occurs, the trap frame supplies additional information.

If you do not know the specific cause of the exception, consider the following issues:

• Hardware incompatibility. Make sure that any new hardware that is installed is compatible with the installed version of Windows. For example, you can get information about compatibility with Windows 7 at the Windows 7 Compatibility Center.
• Faulty device driver or system service. A faulty device driver or system service might be responsible for this error. Hardware issues, such as BIOS incompatibilities, memory conflicts, and IRQ conflicts can also generate this error.

If a driver is listed by name within the bug check message, disable or remove that driver. Disable or remove any drivers or services that were recently added. If the error occurs during the startup sequence and the system partition is formatted with NTFS file system, you might be able to use Safe Mode to rename or delete the faulty driver. If the driver is used as part of the system startup process in Safe Mode, you must start the computer by using the Recovery Console to access the file.

If the problem is associated with Win32k.sys, the source of the error might be a third-party remote control program. If such software is installed, you can remove the service by starting the computer by using the Recovery Console and then deleting the offending system service file.

Check the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing bug check 0x7E. 

You can also disable memory caching of the BIOS might to try to resolve the error. You should also run hardware diagnostics, especially the memory scanner, that the system manufacturer supplies. For more information about these procedures, see the owner's manual for your computer.

The error that generates this message can occur after the first restart during Windows Setup, or after Setup is finished. A possible cause of the error is lack of disk space for installation and system BIOS incompatibilities. For problems during Windows installation that are associated with lack of disk space, reduce the number of files on the target hard disk drive. Check for and delete any temporary files that you do not have to have, Internet cache files, application backup files, and .chk files that contain saved file fragments from disk scans. You can also use another hard disk drive with more free space for the installation. You can resolve BIOS problems by upgrading the system BIOS version.

BCCode: 7E    0x00000007E  which is also 0x1000007E <-- read this link

http://www.faultwire.com/solutions-fatal\_error/SYSTEM-THREAD-EXCEPTION-NOT-HANDLED-0x0000007E-\*1141.html?order=votes 

===============================================================

Look in the Event Viewer to see if anything is reported about those.

http://www.computerperformance.co.uk/vista/vista\_event\_viewer.htm

MyEventViewer - Free - a simple alternative to the standard event viewer of Windows.TIP - Options - Advanced Filter allows you to see a time frame instead of the whole file.

http://www.nirsoft.net/utils/my\_event\_viewer.html

---

Here are some methods to possibly fix the blue screen issue. If you could give the Blue Screen

info that would help. Such as the BCC and the other 4 entries on the lower left. And any other

error information such as STOP codes and info such as IRQL_NOT_LESS_OR_EQUAL or

PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples :

BCCode: 116

BCP1: 87BC9510

BCP2: 8C013D80

BCP3: 00000000

BCP4: 00000002

or in this format :

Stop: 0x00000000 (oxoooooooo oxoooooooo oxooooooooo oxoooooooo)

tcpip.sys - Address 0x00000000 base at 0x000000000 DateStamp 0x000000000

This is an excellent tool for posting Blue Screen Error InformationBlueScreenView scans all your minidump files created during 'blue screen of death'crashes, and displays the information about all crashes in one table - Freehttp://www.nirsoft.net/utils/blue\_screen\_view.html

Many BlueScreens are caused by old or corrupted drivers, especially video drivers however

there are other causes.

You can do these in Safe Mode if needed or from Command Prompt from Vista DVD or

Recovery Options if your system has that installed by the maker.

How to Boot to the System Recovery Options in Windows 7

http://www.sevenforums.com/tutorials/668-system-recovery-options.html

You can try a System Restore back to a point before the problem started if there is one.

How to Do a System Restore in Windows 7

http://www.sevenforums.com/tutorials/700-system-restore.html

---

Start - type this in Search Box ->  COMMAND   find at top and RIGHT CLICK  -  RUN AS ADMIN

Enter this at the prompt - sfc /scannow

How to Repair Windows 7 System Files with System File Checker

http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program

generates in Windows Vista cbs.log (and Windows 7)

http://support.microsoft.com/kb/928228

The log might give you the answer if there was a corrupted driver. (Does not tell all the possible

driver issues).

Also run CheckDisk so we can rule out corruption as much as possible.

How to Run Check Disk at Startup in Windows 7

http://www.sevenforums.com/tutorials/433-disk-check.html

---

Often updating drivers will help, usually Video, Sound, Network Card  (NIC), WiFi, 3rd party

keyboard and mouse, as well as other major device drivers.

Manually look at manufacturer's sites for drivers - and Device Maker's sites.

http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm

Installing and updating drivers in Windows 7 (updating drivers manually using the methods above

is preferred to ensure the latest drivers from System maker and Device makers are found)

http://www.sevenforums.com/tutorials/43216-installing-updating-drivers-7-a.html

How to stop Windows 7 automatically installing drivers

http://support.microsoft.com/kb/2500967/en-us

---

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart

unexpectedly

http://support.microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, STOP Errors (and Windows 7)

http://www.chicagotech.net/vista/vistabluescreen.htm

Understanding and Decoding BSOD (blue screen of death) Messages

http://www.taranfx.com/blog/?p=692

Windows - Troubleshooting Blue Screen Errors

http://kb.wisc.edu/page.php?id=7033

---

In some cases this might be required.

StartUp Repair from Recovery Options or Windows 7 disk

How to Run a Startup Repair in Windows 7

http://www.sevenforums.com/tutorials/681-startup-repair.html 

How to Boot to the System Recovery Options in Windows 7

http://www.sevenforums.com/tutorials/668-system-recovery-options.html

How to Create a Windows 7 System Repair Disc

http://www.sevenforums.com/tutorials/2083-system-repair-disc-create.html

How to Do a Repair Install to Fix Windows 7

http://www.sevenforums.com/tutorials/3413-repair-install.html

Hope this helps.

---

Rob Brown - Microsoft MVP <- profile - Windows Expert - Consumer : Bicycle <- Mark Twain said it right!