Share via

Internal error occured Scanner driver will be closed code 5,202,52

Anonymous
2012-01-15T10:01:21+00:00

I have just purchase a Canonscan 210, I have Windows xp fully updated. Unfortunetly I can not get it to perform after  using the installaiton disk, because of this I removed software then downloaded from Canon web site but problem persisted. Keep getting the message Internal error, Scanner driver will closed Code 5,202,52 any advice would be appreicated.

Regards

Windows for home | Previous Windows versions | Devices and drivers

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
  1. Anonymous
    2012-01-16T05:13:18+00:00

    Hi,

    ·          Was it working before?

    ·          Were there any changes made to the computer prior to this issue?

    Step 1: Verify that the Scanner is detected by the Computer.

    If the scanner is recognized by the computer, it will be displayed under "Imaging devices" in Device Manager.

    a.     On the Start menu, right-click My Computer, then select Properties.

    b.     On the Hardware tab, select Device Manager.

    Step 2: Run the following Microsoft Fix it:

    “Hardware devices are not working or are not detected in Windows “:  http://support.microsoft.com/mats/hardware_device_problems/en-us

    200+ people found this answer helpful.
    0 comments

11 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2015-09-29T14:28:45+00:00

    I have tried the fix above and it did not work.  My scanner connects as it tells me scanner is warming up. But then I get the error Internal Error has occurred. Scanner driver will be closed. Code: 5,202,54.

    Please Help. I have two scanners and both had been working perfectly. Now neither one will scan.

    300+ people found this answer helpful.
    0 comments
  2. Anonymous
    2016-11-15T09:29:12+00:00

    My Solution:

    1. Launch Device Manager
    2. Right Click on scanner
    3. Clicked Properties
    4. Click on the "Driver" Tab
    5. Click "Uninstall"
    6. Re-plug scanner after un-installation
    7. Done

    20+ people found this answer helpful.
    0 comments
  3. Anonymous
    2016-07-26T05:21:15+00:00
    • Only the scanner not working and never had any problem before, until the error code 5.202.54 appeared.
    • Downloaded and installed updated driver - hey presto, scanner works again. Turned off printer and computer.
    • Next day the dreaded error code reappears.
    • Re-installed same driver  but no effect. Error code reappears.
    • Now what ?

    20+ people found this answer helpful.
    0 comments
  4. Anonymous
    2015-09-07T18:33:35+00:00

    Clicked on Start but there was no "My Computer" to select.

    10+ people found this answer helpful.
    0 comments