Apple Software Update doesn't work after Windows 7 Update

I know this is an old thread, but it still pops up when I (and others) are researching this issue - BUT here is what worked for me today - and is VERY EASY! .......

Problem 1. - When clicking on "Update Now" after your iTunes "Search for Updates" tells you a newer version is available, and then NOTHING HAPPENS.

Related Problem 2.  - With Apple Software Update 2.2.  Error message: "The Apple Software Update server could not be found. Check your Internet settings and try again.".

Solution:  (found this info on another thread, so just passing along)

• Go to the Control panel -> Network and Internet -> (and/or) Internet Options.
• In the "Advanced" tab scroll down to "Security" and UNcheck "Do not save encrypted pages to disk".
• Now Apple Software Update 2.2 should work without problems.

(Just an FYI in case anyone is wondering:  I have Windows 8.1, and was updating iTunes to version 12.4.1.6.)

Hello,

Thank you for keeping us updated on the issue.

Method 1

Try to remove Phantom devices from device manager and then try to plug external device.

Windows sometimes displays USB drives and other removable devices that are no longer connected to your system. Here’s how to cure the problem and prevent it from happening again.

1. Click Start, point to All Programs, point to Accessories, and then click Command Prompt.
2. At a command prompt, type the following command, and then press ENTER:

Set devmgr_show_nonpresent_devices=1

3. Type the following command a command prompt, and then press ENTER:

Start devmgmt.msc

4. Troubleshoot the devices and drivers in Device Manager.

NOTE: Click Show hidden devices on the View menu in Device Manager before you can see devices that are not connected to the computer.

5. Expand the devices and removed the phantom device drivers.(Greyed out devices)
6. When you finish troubleshooting, close Device Manager.
7. Type exit at the command prompt.

Note that when you close the command prompt window, Window clears the devmgr_show_nonpresent_devices=1 variable that you set in step 2 and prevents ghosted devices from being displayed when you click Show hidden devices.

Method 2 If the above steps does not resolve the issue follow the steps given below.

1. Plug the Apple device into a USB port on the computer you want to have recognize it.
2. Open Device Manager (Start button, right click on 'Computer', select 'Properties' and 'Device Manager'.
3. Open up the list of Universal Serial Bus Controllers (click on the little arrow beside the entry). One device should show up as an iPad or iPhone with an alert beside it (yellow triangle with exclamation mark).
4. Right click on the entry for that device and select 'Properties'.
5. Select the 'Driver' tab and 'Uninstall'.
6. On the main 'Device Manager' window, select 'Action' from the menu bar then 'Scan for hardware changes' (if that option is not there - single click on one of the devices in the list, then go back to the 'Action' menu and try again)
7. The scan should pick up your Apple device and load the driver.
8. Unplug the device from the USB port, start iTunes, then plug the device back in. All should now be working.

Follow the above steps for each device not recognized.

Hope this information is helpful. Please do let us know if you need further assistance, we’ll be glad to assist you.

Thank you

I tried all of the steps you suggested without success (individual results are listed below). In so much as the info you requested...

1. What is the make and model number of the computer?  HP Pavilion g series
2. Which updates were installed on 12th June?

Windows Malicious Software Removal Tool x64 - June 2014 (KB890830)

Security Update for Microsoft Office 2007 suites (KB2881069)

Security Update for Windows 7 for x64-based Systems (KB2957509)

Security Update for Windows 7 for x64-based Systems (KB2957189)

Security Update for Windows 7 for x64-based Systems (KB2939576)

Update for Windows 7 for x64-based Systems (KB2800095)

Security Update for Windows 7 for x64-based Systems (KB2965788)

Update for Microsoft Word 2010 (KB2880529) 32-Bit Edition

Security Update for Microsoft Office 2007 suites (KB2880513)

Definition Update for Microsoft Office 2010 (KB982726) 32-Bit Edition

Security Update for Windows 7 for x64-based Systems (KB2957503)

Security Update for Microsoft Office Word 2007 (KB2880515)

Update for Microsoft Office Outlook 2007 Junk Email Filter (KB2881065)

Security Update for Microsoft Office 2010 (KB2767915) 32-Bit Edition

Security Update for Microsoft Office 2007 suites (KB2878233)

Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2957689)

3. Which anti-virus is installed on the computer? Bitdefender
4. What is exact error code you get when you plugged the iPhone and iPad?

There is no error code, but it simply does not recognize the device. It doesn't appear in either iTunes or in the Windows Explorer folder under Computer.

Additionally, when I'm in iTunes and attempt to connect to the internet via the Match tab, the following message appears "iTunes could not connect to the iTunes Store. Make sure your network connection is active and try again". My computer was fully connected to the internet at the time without any error messages.

Step 1

- Ran and successfully fixed some other issues I had but it did not flag anything with my iPad

Step 2

Method 1

- Would not run, gave me the following error: Troubleshooting cannot continue because an error has occured (Code 80072EE7)

Method 2

- Followed all instructions, iTunes will still not recognize the iPad

Step 3

- I was not setup to run a Proxy server, so this step just confirmed I didn't have the box checked

Step 4

- Conducted a clean boot and iTunes still would not recognize iPad

Hello,

Thank you for posting your question on Microsoft Community Forum.

I would like to know some information about the issue so that we could assist you further.

1. What is the make and model number of the computer?
2. Which updates were installed on 12th June?
3. Which anti-virus is installed on the computer?
4. What is exact error code you get when you plugged the iPhone and iPad?

Check the update history

http://windows.microsoft.com/en-US/windows7/See-which-Windows-updates-are-installed

I would suggest you to try the following steps:

Method 1 Try to run Microsoft fix it.

Step 1

Try running the Hardware and Devices troubleshooter.

Refer: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

Step 2

Try to run the following fixit and check with the issue:

Diagnose and fix Windows USB problems automatically

http://support.microsoft.com/mats/Windows_USB_diagnostics

Method 2 Follow the article given below from apple.

Device not recognized in iTunes for Windows

http://support.apple.com/kb/TS1538

Method 3

Remove Proxy server settings in Internet Explorer if selected.

1. Open Internet Explorer.
2. Click the Tools button, and then click Internet options.
3. Click the Connections tab, and then click LAN settings.
4. Uncheck the Use a proxy server for your LAN check box. And check the issue.

Method 4 If the issue does not resolve try to clean boot the system.

Try to clean boot the system:

A clean boot is performed to start Windows by using a minimal set of drivers and startup programs. This helps eliminate software conflicts that occur when you install a program or an update or when you run a program in Windows 8.1, Windows 8, Windows 7, or Windows Vista. You may also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

How to perform a clean boot in Windows

http://support.microsoft.com/kb/929135

Note: Refer "How to reset the computer to start normally after clean boot troubleshooting" to reset the computer to start as normal after troubleshooting.

Additional information:

Resolve iOS update and restore errors in iTunes

http://support.apple.com/kb/TS1275

Hope this information is helpful. Please do let us know if you need further assistance, we’ll be glad to assist you.

Thank you