Share via

BI initializeLibrary failed 0xc00000bb on black window

Anonymous
2018-02-15T19:22:20+00:00

Asus e200 do not work after reboot. New system is not started. Recovery and System hidden volume of hdd all right.

Usb boot disk normal running.

What happening?

[Moved from: Windows / Windows 10 / Devices & drivers]

Windows for home | Windows 10 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments
Answer accepted by question author
  1. Anonymous
    2018-02-16T00:21:25+00:00

    Hi,

    The BlInitializeLibrary failed 0xc00000bb error is usually related to your computer's motherboard BIOS. This likely occurs if the motherboard reset to its default values. Modifying BIOS/CMOS incorrectly might cause serious issues on your computer. In line with the error that you're getting, we suggest contacting your device manufacturer for better assistance. They will be able to check what causes the issue and can help you modify and reset BIOS.

    Let us know if you have further questions.

    100+ people found this answer helpful.
    0 comments
Answer accepted by question author
  1. Anonymous
    2018-02-20T05:55:47+00:00

    Hi,

    This error message occurs when the boot firmware on the computer generates lots of memory fragmentation. This can also be caused by an issue with Boot Configuration Data (BCD).

    To help you with this, we suggest that you rebuild the BCD. To do this, please follow the steps below:

    1. Using the bootable USB flash that you already have, plug it in or insert it on your device.
    2. Select Command Prompt and type the following commands, then press Enter:

    Bootrec / fixmbr

    Bootrec / fixboot

    Bootrec /rebuildbcd Note: Please enter each command in order.

    1. Close the Command Prompt window, then restart your device.

    Feel free to post back for an update and let us know if you need more help.

    80+ people found this answer helpful.
    0 comments

9 additional answers

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2018-06-03T02:45:37+00:00

    Hi

    I had this problem, and my asus laptop wasn't boot correcly, so i turned off secure boot from bios menu, after that it boot up nomaly.

    20+ people found this answer helpful.
    0 comments
  2. Anonymous
    2018-02-18T15:06:40+00:00

    Bios normaly worked. Bootable usb flash running winPE system. Notebook working After change hdd and installing window7. I thing trouble in boot efi or bcd. After post my trouble i was finded in microsoft support this problem occurs if the loader does not correctly work this memory

    20+ people found this answer helpful.
    0 comments
  3. Anonymous
    2018-02-23T14:13:09+00:00

    I Have a same Problem, and I think this it can caused by Microsoft windows Bugs!

    Main Board: MSI Z77A-G43

    Bios Version: V2.13 (2.1 tested + 2.7 tested)

    Video Card: gtx 750ti (now removed and i'm on 3770 cpu's gpu)

    PSU brand and model:  Green 750W OC(overclaco

    12v rail Rating of listed PSU: 60A

    CPU: i7 3770

    Memory: 16G (8*2) Gskill ares

    SSD/ HDD: 2x(one removed) 4Tb Western Blue

    CPU COOLER: tower, don't remember the brand, It's cool!

    Keyboard: microsoft comfort curve 3000

    Mouse: Farasoo fom-3170 (2800 DPI)

    Any Additional hardware plugged into your system: Everything disconnected! but a lan cable, mouse and Keyboard, HDMI.

    OC: Never

    Operating System: Win 10 1079 last Update everyday

    .

    I was working with my pc, and go out of room, after 2 hour I came back and see my pc restart endlessly!

    I can enter the bios setup.

    after that I try to fix it, and I saw a massage exactly before restart. that's showing in very short time, so I record it with SlowMotion with my phone and find out what is a Error:

    .

    blinitializelibrary failed 0x000000bb

    .

    what I tested:

    1. windows installation GPT UEFI worked (just on bootable USB, when it come to HDD, same error).
    2. I removed my Graphic cart (Ii have single one) and I'm on CPU (3770). Nothing changed, I still got error.
    3. recreate boot drive. Nothing changed, I still got error.
    4. format and reinstall second windows 10(on USB part it's ok!). Nothing changed, I still got error.
    5. Update bios to last ver. Nothing changed, I still got error.
    6. HDD worked, checked by windows instillation cmd and browser in repair section, Open Drives and move some files from second WinDrive to another.
    7. 5 Time BIOS Upgrade/Downgrade/flash from DOS. Nothing changed, I still got error.
    8. Unplug monitor. Nothing changed, I still got error(flash keyboard lights).
    9. clean dust from pc,Nothing changed, I still got error.
    10. check voltage of parts, check the picture here:https://forum-en.msi.com/index.php?topic=300356.0
    11. Every solid capacitor check, they didn't look broken(their top flat)
    12. Disable everything in bios! one by one! fastboot,... (not sata settings)
    13. This happened when nothing changed. last think I done is rendering with CPU and GPU for about an hour, installing some cheap software for network monitoring.
    14. For win installation, after all, I'm format my 2 first drive. But Nothing chenged, after that gone of HDD to finish installation, error and restart and error and restart and error and ...

    20+ people found this answer helpful.
    0 comments