Stuck in Automatic Repair Loop After Improper Shutdown

Hi AutoRepairLoopBlues,

I am Vijay, an Independent Advisor. I am here to work with you on this problem.

Most likely you will have to go for point D, if you have executed others.

A. Try to boot into safe mode

Power ON your computer and as Windows / manufacturer's Logo appears, Power OFF - Repeat 3 times

Now your computer will go into Advanced Recovery Environment

Advanced Options > Troubleshoot > Advanced Options > Startup Settings > Restart

Press 4 or F4 to enable Safe Mode (5 or F5 to enable Safe Mode with Networking)

Log in once Windows starts in safe mode

See whether you able to login. If yes, come out of this and start normally.

If you are not able to boot like above, You will need to boot through a Bootable USB drive. You will need to create this on another computer which is working - https://www.tenforums.com/tutorials/2376-create...

How to Boot from a USB Flash Drive in Windows 10 - https://www.tenforums.com/tutorials/21756-boot-...

B. Another option when you are in Advanced Options in previous step is to choose (Note - You won't lose any files in this step)

1. System Restore - This will restore your system to a point when things were working fine.

OR

2. Startup Repair - Startup Repair upgrade fixes all Windows errors and retains all files, applications and settings.

C. Penultimate option could be Reset this PC.

In Step A > Troubleshoot > Reset this PC - Keep my files and Remove everything. Choose this carefully as most likely you would like to keep your files.

All apps will be removed and windows will be reinstalled.

D. Last option could be a clean Install. This is the best method to perform a clean install of Windows 10. (If you want to rescue your files, there is a section Rescue Files when Windows Won't Start)

https://answers.microsoft.com/en-us/windows/for...

If you want a very lightweight guide - Start fresh with a clean installation of Windows 10

https://www.microsoft.com/en-us/software-downlo...

Disclaimer - This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

I tried system restore, startup repair, previous system image etc... none will work. If i create a Bootable USB Drive, will i be able to use it to run this desktop without harming/ loosing my files?

Hi, AutoRepairLoopBlues

My name is Maritza and I am an Independent Advisor. I would be happy to help you today.

Try to enter Safe Mode to repair Windows.

Interrupt the normal boot process of your Windows 10 PC

If Windows 10 fails to boot normally three times over, the fourth time it enters by default in an Automatic Repair mode. Using this mode, you can boot into Safe Mode. To trigger the Automatic Repair mode, you must interrupt the normal boot process three consecutive times: use the reset or the power button on your Windows 10 PC to stop it during boot, before it finishes loading Windows 10. If you use the power button, you might have to keep it pressed for at least 4 seconds to force the power off

Then you proceed to repair the computer:

With a reset, all of your Installed applications are lost, but you get an option to save your files if you want. If a system image from the OEM exists-called a recovery partition, then it also gives you an option to restore it. It would make your PC load to default factory settings.

Navigate to Troubleshooting section, again.

Select Reset.

If you select keep my files, your files would be kept. You might also get the third option-restore to factory settings-which isn’t applicable on the PC.

After selecting the desired options, you are presented with a confirmation, something like this- This indicates what you have chosen.

Click on Reset and the resetting should begin.

Let us know if these steps help you to resolve the issue.

You will need to rescue your files. The guide has it all.

Hi AutoRepairLoopBlues

Power on and off your computer three times

How do you do that?

Power on, when you see the Windows Logo - power off

Power on, when you see the Windows Logo - power off

Power on, it will then your computer will boot into the Advanced Recovery environment

You might be asked to sign in with your Microsoft Account or Local Account password.

Click Advanced Options

Click Troubleshoot

Click Advanced Options

Click System Restore, see if you can go back to an earlier time.

If not, boot into the recovery environment again, then try performing a startup repair.

If that does not work, boot into the recovery environment, then click 'Go back to previous version of Windows'

If that does not work.

Power on and off your computer three times

On the third time, your computer will boot into the Advanced Recovery environment

Click Advanced Options

Click Troubleshoot

Click Reset this PC

Click Keep my files

Choose your account

Enter your password

Click Continue

Click Reset

If that does not work.

Go to a working computer, download, create a bootable copy, then perform a clean install.

	Step 1: How to download official Windows 10 ISO files 

	[http://answers.microsoft.com/en-us/windows/wiki...](http://answers.microsoft.com/en-us/windows/wiki/windows_10-windows_install/how-to-download-official-windows-10-iso-files/35cde7ec-5b6f-481c-a02d-dadf465df326)



	Step 2: How to: Perform a clean install of Windows 10

	[http://answers.microsoft.com/en-us/insider/wiki...](http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_install/how-to-do-a-clean-install-of-windows-10/aef0ae63-2117-41ee-a8ea-4a3181625b08)



If there are files on the drive you want to recover, see -  How to: Perform a Custom install of Windows 10

http://answers.microsoft.com/en-us/insider/wiki...

Step 4: how to recover your files from Windows.old:

https://answers.microsoft.com/en-us/windows/for...