Share via

Exception Processing Message 0xc0000005 Parameters 0x7ffec91b1ce8...

Anonymous
2019-02-23T19:03:26+00:00

I just installed Windows 10 edu

and I have no idea why i get system errors whenever I load the .exe files.

Besides this issues 'Exception Processing Message 0xc0000005 Parameters 0x7ffec91b1ce8...',

this error 'Instruction at0x00000000779DA223 referenced memory at 0x000... The memory could not be read.' also came out,

and sometimes '...could not be written' came out..

+When I login to Window, WerFault.exe makes some error.

Thus when I tried to install ChromeSetup and ietabhelper I should try over 10 times and wait for a lucky chance when the error did not come out and succeed to install.

However programs which do not use the internet such as 3DP_Net and Graphic Drivers could be installed smoothly on the Safe Mode.

I read all the questions about this problems and followed them, but my computer is just fresh one and does not have any programs installed.

I did

1. Dism /online /cleanup-image /restorehealth

  1. Windows update
  2. Clean booting
Windows for home | Windows 10 | Settings

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

1 answer

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2019-02-23T21:32:32+00:00

    Hi, sinu527

    My name is Maritza and I am an Independent Advisor. I would be happy to help you today.

    I would recommend you to check your Hard Disk with chkdsk.

    1. On your keyboard, press the Windows logo key and S key at the same time, then type cmd in the search box.
    2. Right-click Command Prompt, then select Run as administrator.
    3. Type chkdsk /f /r, then press Enter on your keyboard.
    4. Press Y on your keyboard.
    5. Press the Windows logo key and R at the same time, then type mdsched.exe.
    6. Click Restart now and check for problems (recommended). Your PC will restart immediately.
    7. Wait for the scans to finish.

    Diagnose memory problems

    Using these steps requires you to restart your computer, so make sure to save any files you may have open and close any running applications before proceeding. Here goes:

    1.- Open Control Panel.

    2.- Click on System and Security.

    3.- Click on Administrative Tools.

    4.- Double-click the Windows Memory Diagnostic shortcut. Quick tip: Alternatively, you can also use the Windows key + R keyboard shortcut, type mdsched.exe, and click OK to launch the tool.

    5.- Click the Restart now and check problems option. (The tool also offers an option to schedule a test in the next reboot, if you can't afford to close your applications and restart immediately.)

    Once your computer reboots, it will start in the Windows Memory Diagnostics environment, and the tests will kick in the Standard mode right away. In this mode, the tool will run all the scans available in the Basic mode, in addition to LRAND, Stride6 (cache enabled), CHCKR3, WMATS+, and WINVC tests.

    You can simply let the Standard mode test your computer's memory, or you can also press the F1 key at any time to open the Windows Memory Diagnostic page to change the scan options.

    Let us know if these steps help you to resolve the issue.

    50+ people found this answer helpful.
    0 comments