Share via

Nuvision model no. TM116W725L 2in1 tablet and laptop. Suddenly gets dead .

Anonymous
2019-03-16T20:43:27+00:00

I have got Nuvision model no. TM116W725L  2in1 tablet and laptop. Suddenly , It totally gets dead except the red led blinking on top left of the screen. Is there any one who can help me solve the problem.

Windows for home | Windows 10 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

5 answers

Sort by: Most helpful
  1. Anonymous
    2019-03-16T21:52:30+00:00

    It likely means you need to get the battery replaced. This will require contacting the manufacturer of your Tablet to see if they can help with getting it replaced.

    3 people found this answer helpful.
    0 comments No comments
  2. Anonymous
    2019-03-20T20:24:37+00:00

    That is not working

    1 person found this answer helpful.
    0 comments No comments
  3. Anonymous
    2019-03-16T21:08:27+00:00

    Dear Andre

    Thank you for your immeduate response.But it didn't work. To give you more about the problem, it doesn't boot the led (red led)blinks continousely.

    1 person found this answer helpful.
    0 comments No comments
  4. Anonymous
    2019-03-16T21:08:41+00:00

    Hi Tesfaye

    Turn that tablet off

    Then, press the power button and the volume down button and hold both of them for 10 seconds

    When the device starts, you should be in Reset Mode . . .

    0 comments No comments
  5. Anonymous
    2019-03-16T20:52:48+00:00

    Hi Tesfaye

    My name is Andre Da Costa; an Independent Consultant, Windows Insider MVP and Windows & Devices for IT MVP. I'm here to help you with your problem.

    The device needs to be reset

    To reset the device, press the power button and the volume down button and hold both of them for 10 seconds. Once the tablet turns on it enters the Reboot screen. Scroll down to “Wipe Data/Reset”.

    0 comments No comments