Fresco Logic 3.0 USB

Hi RenéBravo

Greetings! I am Vijay, an Independent Advisor. I am here to work with you on this problem.

What is the exact issue which you get? Any screenshot?

Hi Rene,

If the driver from the cards installation disc (if the card is/was an add-on) or if the driver from the Fresco site was downloaded and installed, completely uninstall all of those (these drivers are basically for Win 7/Vista/XP support) then restart the PC and let Windows update install the driver(s) that it likes.

The add-on cards (in my case an Inatech 7 Ports PCI-E to USB 3.0 Expansion Card installed in Feb. 2016) that use the Fresco Logic (FL1100) chipset were always plug-n-play with Windows 10 with the best results. (Those that mistakenly installed the old drivers had problems).

Or, if you are referring to (using) the FL2000 USB 3.0 Display device controller then also refer to the links below:

https://support.frescologic.com/portal/home

https://support.frescologic.com/portal/kb/articles/fl2000-recommended-usb-3-0-xhci-host

https://support.frescologic.com/portal/kb/fresco-logic/faq/vga

Hope this helps,

-Richard

Hi René

This does seem to be a known issue, over on their forum, please see this article on the Fresco Logic forum and if that does not resolve this, you can download their driver and see if that gets that device working for you . . .

https://support.frescologic.com/portal/kb/artic...

________________________________________________________

Standard Disclaimer: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

.