When I Boot my PC it goes to a blue screen, which has a “:(“.

Hi Kyle. I'm Greg, an installation specialist, 10 year Windows MVP, and Guardian Moderator here to help you.

Unplug power and remove battery, press and hold power button for 30 seconds to release all power from circuitry, plug back in and power up to see if any change.

I will give you steps to access the Repair Mode to try all repairs to get Windows started, and if not to do the automated Reset or the superior Clean Install after rescuing your files.

1. Use whichever method works in this link to access Advanced Startup Options: https://www.tenforums.com/tutorials/2294-advanc.... Easiest may be to force shut down the PC (by holding in the power button) three separate times to trigger the Startup Options. If one of these methods work, then go to Step 3.
2. If none of the other methods work it may be necessary to Create Windows 10 Installation Media on another PC following the steps in the middle of the downloads page here: http://windows.microsoft.com/en-us/windows-10/m... Make sure to uncheck the box for Recommended Settings to choose only the licensed version.

If the Media Creation Tool will not cooperate use the alternate download site at https://tb.rg-adguard.net/public.php. Burn to DVD using WIndows Image Burner or create bootable flash using one of the options here: https://www.tenforums.com/tutorials/2376-create...

Insert media, boot it by powering up PC while pressing the BIOS Boot Menu Key: https://www.sysnative.com/forums/hardware-tutor...

Choose the boot device as a UEFI device if offered, then on second screen choose Repair Your Computer. If the media won't boot you may need to enter BIOS/UEFI Setup (pressing key given in chart in link above) to turn off Fast Boot or Fast Startup first.

3. In the Advanced Troubleshooting options try to System Restore to a point before the problems began, Startup Repair, then if necessary from Startup Settings try to get into Safe Mode with Networking, or lastly Safe Mode.

If Startup Settings aren't available you can force Safe Mode from Command Prompt following Step 5 here: https://www.digitalcitizen.life/4-ways-boot-saf..., or using the command to unhide F8 Advanced Boot Options here: https://www.tenforums.com/tutorials/22455-enabl... where you can also try the old reliable Last Known Good Configuration.

4. From Safe Mode w/Networking work through the Windows 10 Install Integrity Checklist to make sure the install is set up correctly, optimized for best performance, and any needed repairs get donehttp://answers.microsoft.com/en-us/windows/wiki/windows_10-performance/windows-10-performance-and-install-integrity/75529fd4-fac7-4653-893a-dd8cd4b4db00: If it doesn’t fix Windows enough to start it normally, then try a Windows 10 Refresh: https://www.howtogeek.com/265054/how-to-easily-...

Update your drivers from the PC's Support Downloads web page. Compare the latest drivers with the ones presently installed in Device Manager reached by right clicking the Start Menu. Make sure you have the latest BIOS, Chipset, Display (Video), Sound, USB3, Bluetooth, Network and all other drivers, or else download and install the latest now.

5. If Safe Mode doesn’t work or help stabilize things then return to Advanced Troubleshoot options. Next try Command Prompt to run through Windows 10 Install Integrity Checklist (above link) Step 10 repair commands including sfc /scannow, DISM, a full Disk Check https://www.groovypost.com/howto/check-hard-dri..., or return to Troubleshoot options to Reset Your Windows 10 PC. You can also try System Restore to a point before the problem began.
6. Better yet do the vastly superior Clean Install Windows 10 following the steps in this link to delete all partitions down to Unallocated Space to get it cleanest: http://answers.microsoft.com/en-us/windows/wiki...
7. There is a step to Rescue Files from the booted media or Repair Mode Command Prompt first: http://answers.microsoft.com/en-us/windows/wiki...

These steps are excerpted from my tutorial that compiles everything possible for Troubleshooting Windows 10 Failure to Start: http://answers.microsoft.com/en-us/windows/wiki.... You can continue with the other steps there.

To test hardware, Dell and HP have onboard diagnostics triggered by powering up and pressing the F12 and ESC key respectively.

Test the RAM overnight to stress it with the best bootable test memtest86, following these steps which test both the sticks and the slots: http://www.sevenforums.com/tutorials/105647-ram...

Test the hard drive with diagnostics:

https://www.lifewire.com/free-hard-drive-testin...

Best is to use the manufacturer's own if there is one, otherwise use Seatools bootable long test: http://blog.nowherelan.com/2013/04/04/boot-seat...

Follow this up with a full Disk Check: https://www.groovypost.com/howto/check-hard-dri...

I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it's resolved.

________________________________________________________

Standard Disclaimer There are links to a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

Your options are quite limited.

If the system has a removable battery, you can try removing then see if it boots successfully.

But, if you can't factory reset the device, then your best option is to take it to a reputable repair shop and let them fix it for you.

I don’t have another working PC. When I go to reset my PC windows cannot reset my PC.

Hi Kyle

My name is Andre Da Costa; an Independent Consultant, Windows Insider MVP and Windows & Devices for IT MVP. I'm here to help you with your problem.

Option 1:

Option 1

Go to another working computer, download then install Macrium Reflect Free and create bootable Rescue Flash Drive.

Boot from it and click on 'fix windows boot problems'

Make sure bios is set to uefi or legacy bios depending on how it was installed.

See instructions how to download it:

https://www.groovypost.com/howto/create-windows...

See the section: Create Rescue Media

Option 2:

If that does not work....

Power on and off your computer three times

On the third time, your computer will boot into the Advanced Recovery environment

Click Advanced Options

Click Troubleshoot

Click Reset this PC

Click Keep my files

Choose your account

Enter your password

Click Continue

Click Reset

Option 3

If that does not work.

Go to a working computer, download, create a bootable copy, then perform a clean install.

	Step 1: How to download official Windows 10 ISO files 

	[http://answers.microsoft.com/en-us/windows/wiki...](http://answers.microsoft.com/en-us/windows/wiki/windows_10-windows_install/how-to-download-official-windows-10-iso-files/35cde7ec-5b6f-481c-a02d-dadf465df326)



	Step 2: How to: Perform a clean install of Windows 10

	[http://answers.microsoft.com/en-us/insider/wiki...](http://answers.microsoft.com/en-us/insider/wiki/insider_wintp-insider_install/how-to-do-a-clean-install-of-windows-10/aef0ae63-2117-41ee-a8ea-4a3181625b08)



If there are files on the drive you want to recover, see -  How to: Perform a Custom install of Windows 10

http://answers.microsoft.com/en-us/insider/wiki...

Step 4: how to recover your files from Windows.old:

https://answers.microsoft.com/en-us/windows/for...