Share via

WI FI

Anonymous
2020-11-14T22:01:18+00:00

Not sure how it works

is it the more you pay the quicker the speed

mine says connects to a 2.0 hot spot is that good?

what is 13.39 GB used

also how do I test the speed

Thank you

TIMMY

SSID: SprintWiFi488

Protocol: Wi-Fi 4 (802.11n)

Security type: WPA2-Personal

Network band: 2.4 GHz

Network channel: 6

Link speed (Receive/Transmit): 72/72 (Mbps)

Link-local IPv6 address: fe80::7da1:5980:6712:4f53%16

7.79

Mbps download

6.48

Mbps upload

Windows for home | Windows 10 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

6 answers

Sort by: Most helpful
  1. Anonymous
    2020-11-14T22:39:50+00:00

    can i buy a stronger internet adapter for my dell Optiplex has 2.0 what about the wi-fi  unit sending the signal

    1 person found this answer helpful.
    0 comments No comments
  2. Brian Tillman 24,875 Reputation points Independent Advisor
    2020-11-14T22:38:57+00:00

    Hi. I'm Brian, an Independent Advisor.

    Internet Service Providers offer multiple speeds and charge more for the faster tiers. The ISP I use has offerings that start at 25 Mbs (megabits per second) and go up to 1,000 Mbs. It is the limits imposed by your ISP that truly determine your connection speed.

    There are two dominant frequency bands for WiFi: the 2.4 GHz band and the 5 GHz band, each determined by what radio hardware you have in your PC and in the router. Many PCs and routers offer both bands. The 2.4 GHz band is better at penetrating structures and can travel longer distances due to the lower frequency of the signals. It can carry from about 450 Mbs to about 600 Mbs. The 5 GHz band, because of the shorter wavelength, cannot travel as far without degradation and doesn't pass through walls as easily. It can carry about 1300 Mbs. Most routers supporting 5 GHz also support 2.4 GHz.

    These are't the only factors, however. The wireless standard used by the router, 802.11g, 802.11n, 802.11ac (WiFi 5), or 802.11ax (WiFi 6), also affects speed. Standard WiFi will produce a net speed that is about half of what your ISP tells you they supply. If your speed is 100 Mbs, expect your WiFi to max out in the 50 Mbs range because the signals go in both directions.

    Mesh WiFi systems help this somewhat. They offer better coverage of the area the building covers, but also allow you to use more of the WiFi bandwidth because the mesh points communicate between themselves using a frequency separate from the WiFi frequency your computer is expecting to use so you can get to perhaps 80% or so of the max throughput.

    After all is said and done, in my opinion, your ISP is the major limiting factor to how much speed you'll get with WiFi, barring some radio interference or software issues in the WiFi card driver.

    1 person found this answer helpful.
    0 comments No comments
  3. Anonymous
    2020-11-14T22:30:58+00:00

    7.79

    Mbps download

    6.48

    Mbps upload

    1 person found this answer helpful.
    0 comments No comments
  4. Anonymous
    2020-11-14T22:29:37+00:00

    13.39 GB used is the amount of used traffic on ur adapter

    you can test your internet speed using         https://www.speedtest.net/

    1 person found this answer helpful.
    0 comments No comments
  5. Deleted

    This answer has been deleted due to a violation of our Code of Conduct. The answer was manually reported or identified through automated detection before action was taken. Please refer to our Code of Conduct for more information.


    Comments have been turned off. Learn more