Error BI initializeLibrary failed 0xc00000bb

Hi!

My name is Federico. I'm an Independent Advisor, I'll be glad to help you today.

This error message occurs when the boot firmware on the computer generates lots of memory fragmentation. This can also be caused by an issue with Boot Configuration Data (BCD).

To help you with this, we suggest that you rebuild the BCD. To do this, please follow the steps below:

Using the bootable USB flash that you already have, plug it in or insert it on your device.

Select Command Prompt and type the following commands, then press Enter:

Bootrec / fixmbr

Bootrec / fixboot

Bootrec /rebuildbcd

Note: Please enter each command in order.

Close the Command Prompt window, then restart your device.

The following video maybe helps you:

https://www.youtube.com/watch?v=SD8E-pLMmnk

I hope this helps solve your inquiry. Do not hesitate to get back to us if you need further assistance. I am more than happy to help

Best regards,

Federico

________________________________________________________

Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

Source: https://answers.microsoft.com/en-us/windows/for...

Credits: Eileen Gal

Hi,

Try:

This error message occurs when the boot firmware on the computer generates lots of memory fragmentation. This can also be caused by an issue with Boot Configuration Data (BCD).

To help you with this, we suggest that you rebuild the BCD. To do this, please follow the steps below:

1. Using the bootable USB flash that you already have, plug it in or insert it on your device.
2. Select Command Prompt and type the following commands, then press Enter:

Bootrec / fixmbr
Bootrec / fixboot
Bootrec /rebuildbcdNote*: Please enter each command in order.* 3. Close the Command Prompt window, then restart your device.

Cheers!

Advice from here: BI initializeLibrary failed 0xc00000bb on black window - Microsoft Community

I think I am using the right website to create the boot USB drive (of course from another computer).

Please find the file attached.

It is a screenshot I took from the website where I created the bootable USB. As you can see, it is the official Microsoft website. It is the right one, isn't it?

I am using to boot the USB drive I created from the website in the picture.

When I turn on the computer, after the Windows Logo appears for about 1 minute, it disappears and nothing happens anymore.

I got only a blank screen.

May I send you a short homemade video of what happens since I turn on the pc until the end, please?

thank you in advance for your help

I created a bootable USB. I went to UEFI (typing F2 when the pc starts) and I put the USB drive as the primary boot. The computer actually goes to boot from USB, then the Windows logo appears for about 1 minute. When it disappears, I have a blank screen and the computer stops working completely. What action could I perform? May you help me, please? Thank you in advance. Adriano

Hi,

What did you use to create the USB? - Use the Media Creation Tool, then select "repair this computer" when you get the option.

Cheers!

Hi,

Try:

This error message occurs when the boot firmware on the computer generates lots of memory fragmentation. This can also be caused by an issue with Boot Configuration Data (BCD).

To help you with this, we suggest that you rebuild the BCD. To do this, please follow the steps below:

1. Using the bootable USB flash that you already have, plug it in or insert it on your device.
2. Select Command Prompt and type the following commands, then press Enter:

Bootrec / fixmbr
Bootrec / fixboot
Bootrec /rebuildbcdNote*: Please enter each command in order.* 3. Close the Command Prompt window, then restart your device.

Cheers!

Advice from here: BI initializeLibrary failed 0xc00000bb on black window - Microsoft Community

Hello.

I created a bootable USB. I went to UEFI (typing F2 when the pc starts) and I put the USB drive as the primary boot. The computer actually goes to boot from USB, then the Windows logo appears for about 1 minute. When it disappears, I have a blank screen and the computer stops working completely. What action could I perform? May you help me, please? Thank you in advance. Adriano