Share via

Uefi bios utility settings for upgrade to windows 11

Anonymous
2024-03-08T15:21:22+00:00

I have got myself in the uefi bios utility and trying to up grade to windows 11. Now I have lost internet and function of windows 10. Im in Bios utility now.

* Changed to a question.

Windows for home | Windows 10 | Install and upgrade

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

1 answer

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2024-03-09T04:20:49+00:00

    Hi

    Welcome to Microsoft community.

    It sounds like you're trying to upgrade to Windows 11 and you're currently in the UEFI BIOS utility. It's worth noting that changes in the BIOS should be done carefully as they can significantly impact the system's functioning.

    To upgrade to Windows 11, your system must meet the following minimum requirements:

    1. Processor: 1 GHz or faster with 2 or more cores on a compatible 64-bit processor or System on a Chip (SoC).
    2. RAM: 4 GB or more.
    3. Storage: 64 GB or larger device storage.
    4. System Firmware: UEFI firmware with Secure Boot capabilities.
    5. TPM: TPM version 2.0.
    6. Graphics Card: DirectX 12 or later with a WDDM 2.0 driver.
    7. Display: High definition (720p) display that is greater than 9” diagonally, 8 bits per color channel.

    Here are the steps you need to follow in the UEFI BIOS utility to prepare for the Windows 11 upgrade:

    1. Secure Boot: Navigate to the 'Boot' tab in your BIOS, and make sure 'Secure Boot' is enabled. If you can't find it, it might be under a sub-menu related to 'Security', 'Authentication', or 'Boot'.
    2. TPM: Go to the 'Security' tab in your BIOS or look for a 'TPM Configuration' option. Make sure TPM (Trusted Platform Module) is enabled and that it's set to version 2.0.
    3. Boot Mode: Ensure the Boot Mode is set to 'UEFI', not 'Legacy' or 'CSM'. This option is usually under the 'Boot' tab.

    After making these changes, save and exit the BIOS. If you're unable to restore functionality to Windows 10, you may need to 'Load Optimized Defaults' or 'Reset BIOS settings'. This option is typically found on the 'Exit' tab of your BIOS utility.

    Once you've done this, you should be able to boot back into Windows 10.

    With a stable internet connection, you can proceed to upgrade to Windows 11 either through the Windows Update (Settings > Windows Update) or by using Microsoft's Media Creation Tool.

    Please note that these are general guidelines and the exact steps may vary depending on your motherboard model. If you're unsure, refer to your motherboard manual or contact the manufacturer's customer support for additional guidance.

    Remember, changes in BIOS should be performed with care as they can significantly impact your system's functioning.

    Disclaimer:  Microsoft provides no assurances and/or warranties, implied or otherwise, and is not responsible for the information you receive from the third-party linked sites or any support related to technology. 

    If you are going to modify BIOS Settings, please back up all your personal files first to ensure you do not lose data.  

    Please feel free to let me know how it goes. 

    Best regards

    Derrick Qian | Microsoft Community Support Specialist

    10+ people found this answer helpful.
    0 comments