Hi,
Have you met some error on your screen?
You can try releasing static electricity first. This is more of a hardware problem. Unplug the computer from the electrical socket. Press and hold the power button for approximately 5 seconds. Leave the computer unplugged for a few minutes then re-plug it and try to turn it on.
When we try to restart, press F8, if we could boot into Safe Mode normally.
For BIOS and CMOS, you could try to reset the default setting firstly. Please refer to the information in the link below:
https://neosmart.net/wiki/reset-bios-cmos/
Also try to check if new BIOS version and Motherboard driver could be found in manufacturer's official website. Install them.
Hope this helps and please help to accept as Answer if the response is useful.
Best Regards,
Carl
how to repair my CMOS & BIOS PLEASE
Arthur Knight
1
Reputation point
ON HP PAVILLION WINDOWS 10 BLACK screen on every key stroke unable get Normal configuration from LOW POWER Mode please any smart techo
1 answer
Sort by: Most helpful
-
Carl Fan 6,861 Reputation points
2020-10-07T03:25:29.127+00:00