How to fix winsat formal issues

Question

winsat.log

My primary issue is the winsat reports that it "cannot save results to data store". However, I noticed other issues in the log/watchdog report. Such as "axe results path environment variable is not set" and "not running in AXE" and "cannot find match for WDDM 2.1". I ran dxdiag. and it shows mine is WDDM 3.1. Also, "unable to create a D3D device".

System

Windows 11 Pro Version 22H2 (OS Build 22621.1413)

Motherboard Asrock Z390 Taichi Ultimate BIOS AMI P4.30 11/26/2019

Processor Intel i7 8700K 3.7GHz Base @ 4.7GHz

Memory 128GB (4 x 32GB) 3600MHz @ 3200MHz Corsair Vengeance RGB Pro

Graphics (x2 in Crossfire Mode) XFX Radeon RX580 GTX Black Edition 8GB

PSU Corsair RM1000X

SSD Samsung 970 Evo M.2 NVMe 500GB (C: OS)

SSD Samsung 970 Evo Plus M.2 NVMe 1TB (E: Libraries)

HDD Western Didital 7200RPM 1TB (D: Backup w/ System Image)

RAID 1 (x2) HDD 2TB Seagate 7200RPM (Recording)

Answer 1

Hello there,

If you are seeing this error after the installation of a new GPU then the problem will most likely resolve after the update of video drivers. In fact, try to check and update all of your drivers just to be on the safe side.

You can also try the below steps and see if that helps:

Hold Windows key and press R

Type control panel and press Enter

Accessing the Classic Control Panel interface

Select Performance Information and Tools

Select Advanced Tools

Select Clear all Windows Experience Index scores and rerate the system option

Hope this resolves your Query !!

--If the reply is helpful, please Upvote and Accept it as an answer–