Help - Fail DF-Embedded Signature Verification Test (Tuning and Validation)

Question

Could someone help me with this glitch?

Answer 1

Hello!

If you're getting the "Fail DF-Embedded Signature Verification Test (Tuning and Validation)" error, it could mean that there's a problem with your system's firmware or software. Here are some things you can try to troubleshoot the issue:

1. Update firmware and drivers: Make sure your system's firmware and device drivers are up to date. Go to the manufacturer's website to check for any available updates.
2. Check for software conflicts: Some software or security applications can interfere with the signature verification process. Try disabling or uninstalling any third-party security software or applications.
3. Run system diagnostics: Use the manufacturer's recommended diagnostic utility to scan your system for any hardware-related issues.
4. Restore default settings: If you've made any recent changes to your system's BIOS/UEFI settings, consider restoring them to their default values.

Keep in mind that the steps to resolve this issue may vary depending on your specific hardware and software. So, it's always a good idea to check with your system manufacturer or seek professional assistance if needed.

Hope that helps!

Answer 2

I checked the driver updates and they are all in the latest version, the test still fails, would it be through this service channel the possibility of technical support for the Hardware Lab Kit? I've already contacted Microsoft via phone and it's amazing how none of the attendants know or have heard about the Hardware Lab Kit.

Answer 3

Did you eventually find solution to this failure?