Laudia-13 laptop stuck on Aptio Setup-AMI

Question

Good day

My Packard bell Laudia-13 notebook is stuck on Aptio Setup=AMI

Tried re booting as well as security changes-but nothing helps.

Please assist.

Just unplugged it yesterday,and it started up like that.

Answer 1

Hello there,

If your Laudia-13 laptop is stuck on the Aptio Setup (AMI) screen, it indicates that the system is unable to proceed beyond the BIOS setup utility. Here are a few steps you can try to resolve this issue:

Restart the Laptop: First, try restarting the laptop by pressing and holding the power button until the system turns off. Then, press the power button again to turn it back on. This simple step can sometimes resolve temporary glitches.

Reset BIOS Settings: Enter the BIOS setup utility by pressing a specific key during startup (usually displayed on the screen, such as F2 or Delete). Once in the BIOS setup, look for an option to reset the BIOS settings to their default values. This option may be named "Load Setup Defaults" or "Reset to Default."

Clear CMOS: If resetting the BIOS settings doesn't work, you can try clearing the CMOS (Complementary Metal-Oxide-Semiconductor) memory, which stores BIOS settings. To clear CMOS, you'll need to locate the CMOS battery on your laptop's motherboard and temporarily remove it. Ensure the laptop is unplugged and the battery is removed before attempting this. After a few minutes, reinsert the battery and try starting the laptop again.

Update BIOS: Visit the manufacturer's website for your Laudia-13 laptop and download the latest BIOS update, if available. Follow the manufacturer's instructions to update the BIOS. This process can vary depending on the laptop model, so make sure to carefully follow the provided instructions.

I used AI provided by ChatGPT to formulate part of this response. I have verified that the information is accurate before sharing it with you.

Hope this resolves your Query !!

--If the reply is helpful, please Upvote and Accept it as an answer–