This browser is no longer supported.
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.
![](data:image/svg+xml, %3Csvg xmlns='http://www.w3.org/2000/svg' height='64' class='font-weight-bold' style='font: 600 30.11764705882353px "SegoeUI", Arial' width='64'%3E%3Ccircle fill='hsl(284.8, 28.000000000000004%, 37%)' cx='32' cy='32' r='32' /%3E%3Ctext x='50%25' y='55%25' dominant-baseline='middle' text-anchor='middle' fill='%23FFF' %3EGB%3C/text%3E%3C/svg%3E)
Hello,
I am attempting to get our driver pass the HLK Testing so we may submit it to microsoft for signing. I am however running into an error with the flush test that I am not understanding and have so far been unable to fix.
The parameters I think are right, I believe the proper outlet is Outlet Group 1 and I am using the provided default OID from the HLK controller when running the test. I know the Power Unit IP is correct as I was able to pull it from the PDU which is a SMX3000RMLV2UNC Model from APC.
The provided image is the error I get no matter what I do, it fails rather quickly into the test.
Does anyone know possibly what I am doing wrong here and where? This is the last test I need to figure out in order to get this sent off for signing.
Thank you,
Grant Buchin
We have solved this issue and run into another issue where the PDU is not accepting the clients commands to run commands.
This issue was resolved by properly naming the parameters. in our case
Outlet 1
This issue has been resolved. The problem was the parameter OUTLET. This parameter should only have a numerical value.
We are not running into another issue. It appears as if the PDU is denying the client the rights to issue commands and thus not cycling power.
