"Windows failed to start" and other problems

SuperCord 0 Reputation points
2024-04-27T17:03:26.19+00:00

At the moment, the error "Windows failed to start" appears, It also does not always turn on (the fans are spinning, but the monitor has a black screen, but the screen glows a little due to IPS technology, so we can conclude that it seems to freeze immediately when turned on, but there was one exception, it once I returned from the "freeze" after 5 minutes and showed the error described above again. Also, sometimes the HP logo with artifacts is shown at startup, sometimes a white stripe flashes from the bottom of the monitor at startup (everything is OK with the monitor) and I also tried to boot from a USB flash drive to restore Windows, but it still gives the error "Windows failed to start". Before the first such error, the computer froze when I was watching YouTube, then I turned it on for a long time(I did not turn on the first time, that is, the same thing happened that I described above) I write with the help of a translator, sorry if I did not explain it clearly

Windows 10
Windows 10
A Microsoft operating system that runs on personal computers and tablets.
10,770 questions
{count} votes

2 answers

Sort by: Most helpful
  1. S.Sengupta 15,676 Reputation points MVP
    2024-04-28T00:50:11.1666667+00:00

    A potential hardware or software issue preventing Windows from starting properly.

    Check the Power supply, RAM.

    If you have a Windows installation media (USB or DVD), you can try booting into it and using the Startup Repair option to fix potential boot problems.

    0 comments No comments

  2. Hania Lian 8,386 Reputation points Microsoft Vendor
    2024-04-30T06:22:59.4166667+00:00

    Hello,

    The symptoms you describe, such as screen artifacts, issues starting up, and freezing even during a boot from USB stick. Here are a few troubleshooting steps you could try:

    Test your memory: Use a memory testing tool like Memtest86 to check for any errors. Your symptoms could be due to faulty RAM.

    Perform a hard drive check: Use the built-in Windows CHKDSK utility to check for any issues with your hard drive.

    Check your graphics card: Screen artifacts often indicate an issue with the graphics card. If you have an integrated graphics card, try connecting the monitor to a different port or using a different cable. If you have a separate graphics card, try removing it and running the computer without it to see if that resolves the issue.

    Reset BIOS/UEFI to default settings: Incorrect BIOS/UEFI settings can cause malfunctioning of your when booting. Power on your computer and during power on, press the key to open BIOS/UEFI settings (usually Del, F2, or F10) and reset to default.

    Best Regards,

    Hania Lian

    ============================================

    If the Answer is helpful, please click "Accept Answer" and upvote it.

    0 comments No comments