Share via

BSOD Error code Session3_initialization_failed

Anonymous
2015-08-16T10:43:36+00:00

I get the following stop error code: 0x0000006f (0xffffffffc000012f, 0x0, 0x0, 0x0)

I had Windows 10 installed. Everything was goong fine. Then, suddenly, BSOD. I tried pretty much everything including rolling back to Windows 7, so technically I'm on windows 7 right now.

Any help will be apreciated.

Windows for home | Previous Windows versions | Install and upgrade

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments

1 answer

Sort by: Most helpful
Most helpful Newest Oldest
  1. Anonymous
    2015-09-15T19:22:47+00:00

    Hi,

    Sorry for the delay in response.

    STOP 0x0000007F is caused most likely due to a Hardware failure, like defective memory chips, mismatched memory modules, a malfunctioning CPU, or a failure in your fan or power supply are the probable reasons for this BSOD. It may also occur if you have overclocked your CPU.

    You may also unplug any external devices, if any and check if the issue gets resolved.

    Check with the hardware vendor for any updated hardware drivers or BIOS updates, or both.

    Note: Modifying BIOS/complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

    Hope it helps.

    Was this answer helpful?

    0 comments