Share via

computer taking 15-30 seconds to complete task

Anonymous
2018-07-08T22:03:29+00:00

Everytime I try to click on anything on the computer - it takes 15-30 seconds and will usually show the circle spinning

Windows for home | Windows 10 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

2 answers

Sort by: Most helpful
  1. Anonymous
    2018-07-08T23:00:08+00:00

    Try resetting your BIOS defaults:

    https://www.groovypost.com/howto/reset-pc-bios-...

    If that does not work and you have a desktop computer...

    Power down

    Unplug it

    Open the system unit

    Remove the CMOS CR-2032 chip

    Plug it in, start the machine, wait 10 seconds

    Power down, unplug it, reinstall the CMOS CR-2032 chip

    Plug it in again, power up

    Look for blank icons on the desktop and delete them.

    Open File Explorer

    Open This PC

    Right click your local drive where Windows 10 is install (you will see the Windows logo on it)

    Click Properties

    Click the Hardware tab

    What is the name of the drive listed?

    Is it an SSD?

    If it is, you might need to update the firmware.

    Open Start > Settings > Privacy > Background apps

    Disable all Background apps.

    Disabling Windows Update:

    Press Windows key + R

    Type: services.msc

    Hit Enter

    Scroll down to Windows Update

    Select it then right click it

    Click Properties

    Under the General tab, choose Startup type to Disabled

    Click Stop

    Click Apply then OK

    Also, check whats starting up with Windows.

    Press Windows key + X

    Click Task Manager

    Click Startup tab

    Disable all except Windows Defender.


    Press Windows key + R

    Type: msconfig

    Hit Enter

    Go to the services tab

    Check the box,

    hide all Microsoft services

    Disable the remaining services

    Click Apply then OK

    Restart if prompted

    uninstall your display driver:

    Press Windows key + X

    Click Device Manager

    Expand Display adapters

    Right click the current display adapter

    Click Uninstall

    Exit Device Manager

    Restart

    Click Start

    Type: CMD, from the results, right click CMD

    Click 'Run as Administrator'

    At the Command Prompt, type: chkdsk /r /f

    When you restart your system, your computer will be scanned for errors and attempts will be made to correct them.

    Note: This is a non-Microsoft website. The page appears to be providing accurate, safe information. Watch out for ads on the site that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the site before you decide to download and install it.

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments No comments
  2. Anonymous
    2018-07-08T22:10:50+00:00

    Hi Larry. I'm Greg, an installation specialist and 8 year Windows MVP, here to help you.

    If any steps cannot be performed normally then try them in Safe Mode with Networking or Safe Mode: https://www.digitalcitizen.life/4-ways-boot-saf...

    Update your drivers from the PC maker's Support Downloads web page, using the full model number, Serial Number or Dell Service Tag on sticker. Compare the latest drivers available for download with the ones presently installed in Device Manager reached by right clicking the Start Menu. Make sure you have the latest BIOS or UEFI firmware, Chipset, Display (Video), Sound, USB3, Bluetooth, Network and all other drivers, or else download and install the latest now.

    Go over this checklist to make sure the install is set up correctly, optimized for best performance, and any needed repairs get done: http://answers.microsoft.com/en-us/windows/wiki...

    Start with Step 4 to turn off Startup freeloaders which can conflict and cause issues, then Step 7 to check for infection the most thorough way, then step 10 to check for damaged System Files. Then continue with the other steps to go over your install most thoroughly.

    Test your RAM overnight to stress it with a more reliable bootable test, following these steps which test both the sticks and the slots: http://www.sevenforums.com/tutorials/105647-ram...

    Test the hard drive with diagnostics: https://www.lifewire.com/free-hard-drive-testin.... Best is Seatools bootable Long Test which works on all models: http://blog.nowherelan.com/2013/04/04/boot-seat....

    Follow that up with a full Disk Check, from the Command Prompt if necessary: https://www.groovypost.com/howto/check-hard-dri...

    If nothing else helps you can run a Repair Install by installing the Media Creation Tool and choosing from it to Upgrade Now. This solves many problems and will also bring it up to the latest version which you need anyway and by the most stable method. http://windows.microsoft.com/en-us/windows-10/m...

    But remember that in Windows 10 everything depends upon the quality of the install, and Factory or Upgrade installs are inferior installs which most enthusiasts won't even run because they'd expect endless issues. Consider now or later doing the Clean Install in this link which compiles the best possible install that will stay that way as long as you stick with the tools and methods given: http://answers.microsoft.com/en-us/windows/wiki...

    There is also an automated Fresh Start that reinstalls WIndows while shedding corrupting factory bloatware, saves your files, but doesn't clear the drive to get it cleanest: https://www.howtogeek.com/265054/how-to-easily-...

    I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it's resolved.

    ________________________________________________________

    Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

    Was this answer helpful?

    1 person found this answer helpful.
    0 comments No comments