Pc did not start correctly loop

Question

Stuck in an endless loop of your pc did not start correctly. Tried all the tutorials on how to fix the problem but it still won't load. It wont even go into safe mode. Had this problem happen before and had to system reset but ideally don't want to so that again as have important documents saved. When it happened last time it was because the pc wasnt connected to the internet. Tried connecting Ethernet cable but still stuck in the loop.

Tia

Answer 1

Hi Chay, thank you for that information, in this case, we need to use Windows installation media in USB to repair the issue, to do that kindly follow the steps below:

Note: We need another PC and a USB drive (At least 8GB and make sure there are no files inside as it will reformat the USB) once you have that kindly follow the steps:

Step 1: Create Windows 10 installation Media

Go to this link: https://www.microsoft.com/en-us/software-downlo...

Scroll down and click "Download Tool Now" then run the Media creation tool (the downloaded file)

If you agree to the license terms, select Accept.

On What do you want to do? page, select Create installation media for another PC and then select Next.

Select the language, edition, and architecture (64-bit or 32-bit) for Windows 10. This table will help you decide which edition of Windows 10 you’ll choose:

On Select which media, you want to use click USB and save it to your USB drive.

Once done, do the repair kindly follow the steps below:

Insert the USB into the affected PC

Start the PC and if you see “Press any key to boot from DVD,” do so. If you don’t see the message, you might need to change the boot order in your computer's BIOS settings so that it first starts from the DVD or USB.

When you see the Install Windows page, tap or click Repair your computer to start the Windows Recovery Environment.

In the Windows Recovery Environment, on the Choose an option screen, tap or click Troubleshoot.

Tap or click, advanced options and then click on Startup repair.

Answer 2

Thankyou for the response. Whenever I go onto system restore it just says there's no restores available to choose.

Answer 3

Hi Chay, thanks for reaching out. My name is Bernard a Windows fan like you. I'll be happy to help you out today, my working hours vary & I usually reply between 10:00 pm & 6:00 am EST(UTC -5) Monday to Sunday.

I understand the issue you have, there is nothing to worry I am here to help, have you noticed any changes before the issue starts? have you installed any hardware or software that may trigger the issue? while waiting for your response, kindly follow the steps below:

Before doing the steps, make sure to remove all peripherals connected to your PC and just retain the Mouse, Keyboard, and Power source.

First, we need to go to Windows recovery mode and try the options there:

Restart the device 3-5 times until I reach Windows recovery mode, wherein you have the option to select Continue, Troubleshoot, or Exit.

Or try to Press and hold the Shift key while continuously pressing F8 while starting the PC

Then on Windows Recovery:

Do system Restore:

Click Troubleshoot> Advanced options> System restore - Follow the prompt and choose the date when it was working fine.

Let me know how it goes and I hope that helps.

Bernard