Share via

Kernel Power Error 41 (63)

Anonymous
2024-06-02T09:12:02+00:00

I have a problem with the kernel power error 41 (63) I checked in the event log, this error appears in the system several times a day, but in some cases the computer does not turn off, but there are special cases where the computer shuts down and reboots.

Below is the error after which the computer turns off:

<System>

<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331c3b3a-2005-44c2-ac5e-77220c37d6b4}" /><EventID>41</EventID><Version>8</Version><Level>1</Level><Task>63</Task><Opcode>0</Opcode><Keywords>0x8000400000000002</Keywords><TimeCreated SystemTime="2024-06-02T08:30:14.4770635Z" /><EventRecordID>92426</EventRecordID><Correlation /><Execution ProcessID="4" ThreadID="8" /><Channel>System</Channel><Computer>svinoteken</Computer><Security UserID="S-1-5-18" /></System>

  • <EventData> <Data Name="BugcheckCode">0</Data><Data Name="BugcheckParameter1">0x0</Data><Data Name="BugcheckParameter2">0x0</Data><Data Name="BugcheckParameter3">0x0</Data><Data Name="BugcheckParameter4">0x0</Data><Data Name="SleepInProgress">0</Data><Data Name="PowerButtonTimestamp">0</Data><Data Name="BootAppStatus">0</Data><Data Name="Checkpoint">0</Data><Data Name="ConnectedStandbyInProgress">false</Data><Data Name="SystemSleepTransitionsToOn">3</Data><Data Name="CsEntryScenarioInstanceId">0</Data><Data Name="BugcheckInfoFromEFI">false</Data><Data Name="CheckpointStatus">0</Data><Data Name="CsEntryScenarioInstanceIdV2">0</Data><Data Name="LongPowerButtonPressDetected">false</Data></EventData> </Event>
    and an error that appears several times but everything works:
    <System> <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331c3b3a-2005-44c2-ac5e-77220c37d6b4}" /><EventID>41</EventID><Version>8</Version><Level>1</Level><Task>63</Task><Opcode>0</Opcode><Keywords>0x8000400000000002</Keywords><TimeCreated SystemTime="2024-05-31T12:32:43.6892843Z" /><EventRecordID>92299</EventRecordID><Correlation /><Execution ProcessID="4" ThreadID="8" /><Channel>System</Channel><Computer>svinoteken</Computer><Security UserID="S-1-5-18" /></System>
  • <EventData> <Data Name="BugcheckCode">0</Data><Data Name="BugcheckParameter1">0x0</Data><Data Name="BugcheckParameter2">0x0</Data><Data Name="BugcheckParameter3">0x0</Data><Data Name="BugcheckParameter4">0x0</Data><Data Name="SleepInProgress">6</Data><Data Name="PowerButtonTimestamp">0</Data><Data Name="BootAppStatus">3221225684</Data><Data Name="Checkpoint">0</Data><Data Name="ConnectedStandbyInProgress">false</Data><Data Name="SystemSleepTransitionsToOn">1</Data><Data Name="CsEntryScenarioInstanceId">0</Data><Data Name="BugcheckInfoFromEFI">false</Data><Data Name="CheckpointStatus">0</Data><Data Name="CsEntryScenarioInstanceIdV2">0</Data><Data Name="LongPowerButtonPressDetected">false</Data></EventData> </Event>
Windows for home | Windows 10 | Performance and system failures

Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.

0 comments No comments

3 answers

Sort by: Most helpful
  1. DaveM121 891.1K Reputation points Independent Advisor
    2024-06-04T05:45:31+00:00

    To try to force Windows 10 show any faulting drivers, the best option would be to turn on Driver Verifier, let your PC crash 3 times, then you must turn off Driver Verifier, and finally, upload any newly created minidump files

    Before you run Driver Verifier, please create a new System Restore Point

    https://answers.microsoft.com/en-us/windows/for...


    Note, if you have any difficulty getting into Windows with Driver Verifier enabled:

    Start your PC, just as Windows attempts to load (spinning dots), press and hold Power Button for 5 - 10 seconds to perform a Hard Shut Down

    Do this twice

    On the third start Windows will boot into the Recovery Environment and from there you can access System Repair, Safe Mode, Command Prompt... etc.

    Go to Troubleshoot - Advanced Option - Startup Settings and click Restart

    Upon restart, press 4 to enter Safe Mode

    Open Command Prompt as Administrator and run these two commands, then restart your PC.

    verifier /reset

    verifier /bootmode resetonbootfail

    Was this answer helpful?

    0 comments No comments
  2. Anonymous
    2024-06-04T05:36:00+00:00

    No, i don't have Minidumps, my systems doesn't save it.

    Was this answer helpful?

    0 comments No comments
  3. DaveM121 891.1K Reputation points Independent Advisor
    2024-06-02T10:42:46+00:00

    Hi, I am Dave, I will help you with this.

    Please check to see if your PC is producing any minidump files, I will check those to see if they provide any insight into a potential cause of the system crashes.

    Open Windows File Explorer.

    Navigate to C:\Windows\Minidump

    Copy any minidump files onto your Desktop, then zip those up.

    Upload the zip file to the Cloud (OneDrive, DropBox... etc.), then choose to share those and get a share link.

    Then post the link here to the zip file, so we can take a look for you.

    Was this answer helpful?

    0 comments No comments