A family of Microsoft spreadsheet software with tools for analyzing, charting, and communicating data.
Figured it out - "Select Data Source", "Switch Row/Column"
This browser is no longer supported.
Upgrade to Microsoft Edge to take advantage of the latest features, security updates, and technical support.
Hi,
I'm using Excel 2010 to create a stacked column chart, but am having a fundamental issue - not stacking. Here's the data table. What's the trick?
| Reservoir - Damaged | Impeller - Magnet Assembly | Heater - Tube/Element | Tray - Damaged | Reservoir - Fill Cap | PCB - Faulty | PCB - Sensor Assembly | Impeller - Noise | Housing - Rear Housing | Not Heating - No Defect Found | |
|---|---|---|---|---|---|---|---|---|---|---|
| Reservoir - Damaged - Cracked | 11 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Reservoir - Damaged - Notes | 7 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Impeller - Magnet Assembly - Notes | 0 | 8 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Impeller - Magnet Assembly - Stuck | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Impeller - Magnet Assembly - Weak | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Heater - Tube/Element - Leakage Current | 0 | 0 | 1 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Heater - Tube/Element - Notes | 0 | 0 | 4 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Heater - Tube/Element - Out of spec | 0 | 0 | 5 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
| Tray - Damaged - Cracked | 0 | 0 | 0 | 3 | 0 | 0 | 0 | 0 | 0 | 0 |
| Tray - Damaged - Notes | 0 | 0 | 0 | 5 | 0 | 0 | 0 | 0 | 0 | 0 |
| Reservoir - Fill Cap - Damaged | 0 | 0 | 0 | 8 | 0 | 0 | 0 | 0 | 0 | 0 |
| Reservoir - Fill Cap - Leaking | 0 | 0 | 0 | 0 | 2 | 0 | 0 | 0 | 0 | 0 |
| Reservoir - Fill Cap - Missing | 0 | 0 | 0 | 0 | 3 | 0 | 0 | 0 | 0 | 0 |
| PCB - Faulty - Capacitor | 0 | 0 | 0 | 0 | 2 | 0 | 0 | 0 | 0 | 0 |
| PCB - Faulty - Notes | 0 | 0 | 0 | 0 | 0 | 2 | 0 | 0 | 0 | 0 |
| PCB - Sensor Assembly - Disconnected | 0 | 0 | 0 | 0 | 0 | 5 | 0 | 0 | 0 | 0 |
| PCB - Sensor Assembly - Notes | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 |
| PCB - Sensor Assembly - Out of spec | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 |
| Impeller - Noise - Out of balance | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 6 | 0 | 0 |
| Housing - Rear Housing - Cracked | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 5 | 0 |
| Housing - Rear Housing - Notes | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 0 |
| Not Heating - No Defect Found - Notes | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 6 |
A family of Microsoft spreadsheet software with tools for analyzing, charting, and communicating data.
Locked Question. This question was migrated from the Microsoft Support Community. You can vote on whether it's helpful, but you can't add comments or replies or follow the question.
Answer accepted by question author
Figured it out - "Select Data Source", "Switch Row/Column"
Can you post a sample file on Skydrive (or similar file sharing site) so we can see what you are doing.? Then tell us where to look. best wishes
Windows Live Skydrive: http://skydrive.live.com
MediaFire: http://www.mediafire.com
FileFactory: http://www.filefactory.com
FileSavr: http://www.filesavr.com
FileDropper: http://www.filedropper.com
RapidShare: http://www.rapidshare.com
Box.Net: http://www.box.net/files