Problem Reboot Loop Server 2008 x64

Question

Good morning I have a DELL R510 server with a RAID 5 H700 and Windows Server 2008 x64, I replaced an HDD I watch I did the rebuild and then I restarted it but it does not restart anymore it continues to go into LOOP, in temporary mode it stops on the crcdisk.sys file and reboots.
what can I do to get it started? I tried to put the CD and restore but it asks me for the Raid H700 controller drivers, from the dell site I downloaded several but none works
who can help me?
thank you

Answer 1

May want to ask for help with the hardware in Dell dedicated forums.
https://www.dell.com/community/PowerEdge-Hardware-General/bd-p/PowerEdge-General-HW

--please don't forget to Accept as answer if the reply is helpful--

Answer 2

I downloaded several but none works

What did you download? Probably will need the files named oemsetup.inf, txtsetup.oem, and the *.sys file for your disk controller.

--please don't forget to Accept as answer if the reply is helpful--

Answer 3

I downloaded the drivers of the check directly from the DELL website I don't understand why they don't work

Answer 4

Again, I'd check what was downloaded. You'll need the files named oemsetup.inf, txtsetup.oem, and the *.sys file for your disk controller. Extract the files here.
https://www.dell.com/support/home/en-us/drivers/driversdetails?driverid=kw20y

--please don't forget to Accept as answer if the reply is helpful--

Answer 5

yes I had downloaded this driver, the files included in this file are:
nodev
omsetup
percsas2.cat
percsas2.sys

when I select one of these files it tells me that they are incorrect for the hardware required
helpppppp