ERROR IN WINDOW 11

Question

My laptop runs on window 10. I installed window 11 although I did not receive that window 11 upgrade is available for my laptop. My laptop hardware supports window 11. Now while switching on, I get an error message that "a required device isnt connected or cant br accessed. Error code 0xc000000f. How do I rectify this? Is it going to harm my laptop?

Answer 1

One of the definitions for the error code 0xc000000f = The system cannot find the drive specified

Find 2 flash drives that can be formatted.

Or find one flash drive that can be formatted twice.

And find a working computer to create bootable flash drives.

For the first flash drive create a bootable Sea Tools flash drive:
https://www.seagate.com/support/downloads/seatools/

Perform the long generic test > take pictures with a camera or smartphone camera > post images into this thread using a share link

For the second flash drive or after the drive has been tested > create a bootable Ubuntu flash drive:
https://ubuntu.com/tutorials/create-a-usb-stick-on-windows#1-overview

Boot to the Ubuntu flash drive > backup any important files
https://www.pcworld.com/article/438909/linux-to-the-rescue-how-ubuntu-can-help-a-computer-in-distress.html

Clarify:
a) Did or didn't the computer pass the Microsoft
Check for compatibility
Use the PC Health Check app9 to see if your PC can run Windows 11.

DOWNLOAD PC HEALTH CHECK APP SEE MINIMUM SYSTEM REQUIREMENTS
https://www.microsoft.com/en-us/windows/windows-11#pchealthcheck

b) or was Windows 11 clean installed on a computer that did not pass all of the compatibility checks?

c) or was an upgrade performed by modifying the registry and files?

https://www.disk-image.com/faq-bootmenu.htm

.
.
.
.
.
Please remember to vote and to mark the replies as answers if they help.

On the bottom of each post there is:

Propose as answer = answered the question

On the left side of each post: Vote = a helpful post
.
.
.
.
.

Answer 2

Hi @Bruttendu Moharana ,

Are you able to login to the PC now ?
If not try entering the recovery mode and remove the latest update.
https://support.microsoft.com/en-us/windows/start-your-pc-in-safe-mode-in-windows-10-92c27cff-db89-8644-1ce4-b3e5e56fe234

I would suggest you to update all your drivers and BIOS.
The processor for Windows 11are selected by various parameters and the important one is DCH Design Principles, so it is important to update all your drivers.

https://learn.microsoft.com/en-us/windows-hardware/drivers/develop/dch-principles-best-practices

---------

--If the reply is helpful, please Upvote and Accept it as an answer--

Answer 3

Make sure the chipset has been installed. The chipset allows windows to find and use devices integrated into the mother board.

--please don't forget to upvote and Accept as answer if the reply is helpful--