Image fails on Dynamic Driver phase

Question

Good Afternoon, a tech is trying to image a Precision 3650 Tower with the Base image MDM task sequence. I recently made a new driver package and added it to SCCM. The image deploy now fails at the Dynamic Driver phase. It was working prior to the driver package being added. thank you.

Here is the driver that I added to the existing task sequence:

Here is the imaging task sequence working prior to my driver addition.

Here is the smsts log, The only error I see is: Failed to find the source drive where WinPE was booted from TSMBootstrap 6/28/2022 3:08:05 PM 1840 (0x0730)

215854-smsts.log

Answer 1

Hi,

Could we provide the error screenshot on the client?

And we check the smsts.log, there is no evident error in it, is it the whole log? please upload the entire logs, note erase the private information.

---

If the answer is the right solution, please click "Accept Answer" and kindly upvote it. If you have extra questions about this answer, please click "Comment".
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.

Answer 2

Hi,

Please check setupact.log, setuperr.log to see if any error relating to the dynamic drivers.

Besides, if we image a Precision 3650 Tower with the Base image MDM task sequence without drive, and then deploy the drive to client, will it succeed?

---

If the answer is the right solution, please click "Accept Answer" and kindly upvote it. If you have extra questions about this answer, please click "Comment".
Note: Please follow the steps in our documentation to enable e-mail notifications if you want to receive the related email notification for this thread.