Azure VPN Gateway

hi, i want to reach a public ip from onprem trough azure vpn

We have configured a site-to-site vpn between azure and client (on premise) our client request kiosks to reach a public ip through azure vpn , I have made a route public ip – next hop internet and I can reach the public ip from azure but not from client,…

Server did not respond properly to VPN Control Packets. Session State: Key Material sent

Azure S2S VPN down on Azure, but up on customer's end

We are trying to create an Azure S2S VPN connection with a third party who is using a Cisco ISR 4000 Series device. The third party has confirmed the first phase is up on their end, but the connection is still showing down on our end (Azure). The…

Site to site vpn between aws and azure connectivty question

Dear All, I hava a question would like to seek for your assistant, in azure i have a virtual network gateway call "vpn-azure-aws" with address space 10.2.0.0/16 under virtual network call "vnet-azure" and i have a vm with ip…

Add-AzVpnClientRootCertificate VpnClientRootCertificateDataInvalid

I'm unable to add a new root certificate to my Virtual network gateway/Point-to-site configuration It fails in both the portal and powershell In the portal, I get a generic fail message In powershell, I use Add-AzVpnClientRootCertificate and I get back…

Site-to-site VPN Connection via Azure VPN Gateway Not Connected

Hi, I have a requirements to establish Site-to-Site VPN connection to existing network (ASX). In my Azure tenant I created VNet, VPN Gateway with public IP, Local Network Gateway and a Site-to-Site Connection, which I configured according to the…

“Need guidance on securely restricting access to all our Azure services (Container Apps, DB, Redis) via VPN”

All our services are hosted on Azure (Container Apps, MySQL, Redis, etc.). We want to secure them by making them only accessible via VPN and disable public access. Please guide us on the best architecture and tools for this

Cannot associate Public IP to Virtual Network Gateway – LinkedAccessCheckFailed despite full permissions

Hi, I'm experiencing a permission-related issue when trying to create a Virtual Network Gateway in Azure. Even though I have the highest level of privileges in the subscription, I consistently receive the following error: { "code":…

Getting brelow error in Azure VPN Gateway

Egress Bytes (since last connected) : 0 B Ingress Packets (since last connected) : 0 Packets Egress Packets (since last connected) : 0 Packets Ingress Packets Dropped due to Traffic Selector Mismatch (since last connected) : 0 Packets Egress Packets…

Point-to-Site VPN client for ARM machines

I have setup a Point-to-Site virtual network gateway to allow users to connect to a virtual network using a VPN. The VPN works on x86 based machines but not on ARM based machines like the Microsoft Surface. Is there a workaround or will Microsoft be…

VPN Gateway is not replying for the traffic inside tunnel.

I have established a site to site vpn to my onpremise firewall, both sides the status is connected and i can see the logs from my firewall that the vpn is connected. When i try to access my azure resources, i dont get any response. we have checked the…

Unable to route traffic to On-premise device

I have setup a VPN turnnel between Azure nd On-premise device it shows connected on the dashboard however On-premise device is not seeing traffic from Azure . Kindly assist

Tengo este error al iniciar sesión con mi cuenta de Microsoft y no me abre en ningún navegador me sale el mismo error en todos los dispositivos que lo intento.

El caso es que al momento de quieres entrando en cualquier dispositive al momento de dar initial session me parece este mensaje: Please retry with a different device, use a VPN, or other authentication method to sign in. For more details, please see…

Cannot create a VPN Gateway via CLI - Cannot find Resource Group

Hi I'm trying to add a (Basic SKU) VPN gateway to my Azure subscription in order to create a S2S VPN to on-premises. I'm using a Powershell that requires a few parameters to be entered upon running the script eg. Resource Group, Virtual Network, Gateway…

After enabling VPN NAT (Ingress 10.31.194.177→10.0.0.4) on VpnGw2, S2S connection VNet1toSite1 stays at “Unknown”; no Phase 2 established.

We have an Azure site-to-site VPN connection “VNet1toSite1” between an on-prem FortiGate (public IP x.x.x.x) and an Azure VPN gateway “vng-customer-pro” (SKU VpnGw2). The goal is to publish the VM 10.0.0.4 to the customer as 10.31.194.177 using VPN…

Azure VPN Enterprise Application is missing

While testing and learning about the Azure-Point-To-site-VPN we deleted the Enterprise Application "Azure VPN" and now are unable to recreate it or to configure any new Point-To-site-VPN. Looking and googeling for hours did not bring up any…

Site VPN not working

We lost our connection via IPSec VPN from our office to Azure VPN we need help is figuring out where the connection was lost.

Site to site VPN issue.

I am trying to build a site to site vpn from azure to a vendors network. The vendor will not allow for a subnet bigger than 192.168.249.160/29. Is there a way to build the tunnel with a smaller subnet?

Public IP - Upgrade to Standard SKU

Hi Everyone, I have a VPN gateway that is currently using a Basic public IP address, and I need to upgrade it to a Standard SKU. The public IP is associated with the VPN gateway. I found the following Microsoft documentation on the migration…

while connecting to Azure VPN getting 53003 error

Getting 'You cannot access this right now' Error Code: 53003 Request Id: Correlation Id: Timestamp: 2025-07-01T07:46:32.406Z App name: Azure VPN App id: IP address: Device identifier: Device platform: Windows 10 Device state: Compliant