Share via


An App-Time Story: Build an App before you go to bed and earn $100 in the morning! Continued

Chapter Four: Export to Visual Studio

If  you are here, I assume you have customized the match template in the previous tutorial. Are you all done changing the imagines and text? It is time to go to Visual Studio 2012. (This section is from Jim O’Neil’s guide From Construct2 to Visual Studio)

This section might seem long but believe me it takes minutes, I promise.

1. Export the project from Construct 2:

clip_image002

 

 

2. Select Windows 8

clip_image004

3. Pick a directory to export to.

clip_image006

 

4. Wait while project is exported.

clip_image007

 

5. Choose option to open destination folder.

clip_image009

Note: you will need to have Visual Studio 2012 (or Visual Studio 2012 Express for Windows 8) running on a Windows 8 machine to proceed.

 

6. You’ll see a File Explorer Window open into the directory containing the exported Visual Studio project. The important file is the one with a .sln extension and a type of Microsoft Visual Studio Solution. clip_image011

7. Double-click that file to open Visual Studio 2012. One of the panels you will see open is the Solution Explorer, shown below. If other files open with Visual Studio too, you can just ignore them.

clip_image013

 

8. Double-click the package.appxmanifest file (highlighted above) from within the Solution Explorer.

 

9. In the panel that opens, select the Packaging tab (it will have a red X next to it)

clip_image015

 

.

10. On the Packaging tab, click the Choose Certificate button.

clip_image017

11. Then pick Create Test Certificate, and press OK.

clip_image018

12. Press OK on the next dialog (you don’t need to enter anything in the text boxes)

clip_image020

13. You can now run your game as a full-fledged Windows 8 application by clicking the arrow next to Local Machine (below) or just pressing the F5 key.

clip_image022

14. At this point run your game just to make sure it works as you expected. You should check out snapped view (move mouse to top of screen until you see the hand cursor, then drag to middle of screen and then all the way left). Your app will now occupy about a third of the screen.

Depending on options you used while building your game, the snapped view may or may not be usable. If it is not, see https://bit.ly/Zu3KJl for some recommendations.

15. Before submitting to the store you need to provide a minimum of four graphics – three logos and a splash screen. These graphics have very specific size requirements (below) and should be .png or .jpg format. Use MS Paint or other free drawing tools to great these graphics.

Overwrite the existing file in the project directory (filenames below) with your custom graphics.

Asset

Filename

Size in Pixels

Logo

app-logo.png

150 x 150

Small Logo

app-smallogo.png

30 x 30

Store Logo

app-storelogo.png

50 x 50

Splash Screen

splashscreen.png

620 x 300

At this point you will need to have your Windows Store Account active and be able to login with your Microsoft Account ID and password.

16. Right-click on the project in Solution Explorer to bring up the menu, then select Store, and Associate App with Store… On the dialog that results, press the Sign in button

clip_image024

clip_image026

 

 

17. You will be prompted to enter your Microsoft account ID for your store account; enter your credentials and press the Sign in button.

clip_image028

18. After you sign in, you’ll see the following dialog. Click the Reserve Name link.

 

clip_image030

 

19. You’ll be asked to sign in again.

clip_image032

 

20. You’ll then see the steps to submit the app to the store.

clip_image034

 

21. App name: pick a name for your app. It has to be unique among all apps in the store.

Press the Reserve app name button. If the name is already in use, you’ll need to pick a different name; otherwise, continue to 22clip_image036

 

22. Press the Save button

clip_image038

:

23. Continue with Selling details

clip_image039

Pick free, or charge if you like.

clip_image041

For the information on the rest of the page:

Markets:

Pick the United States. You may pick any others except Korea, Brazil, South Africa, and Taiwan (as they have additional external certification requirements for games)

Release date:

Leave as Release my app as soon as it passes certification.

Category

Select a Category (it can be Games, but doesn’t have to be)

Subcategory

Select a Subcategory (not all Categories will have subcategories)

Hardware Requirements

Leave both Minimum DirectX feature level and Minimum system RAM set to Available to all systems.

Accessibility

Leave this unchecked

Press the Save button.

24. Continue with Advanced features, do nothing except press the Save button

clip_image042

clip_image043

25. Continue with Age rating and rating certificates

clip_image044

Select an age rating for your application based on the theme and content.

clip_image046

Then press the Save button.

clip_image048

26. Continue with Cryptography

clip_image049

For Does this app call, support, contain or use cryptography or encryption? Select No.

Then check the checkbox that appears ( I confirm that this app is widely distributable to all jurisdictions without government review, approval, license or technology-based restriction.)

Finally, press the Save button.

clip_image051

At this point you have created most of the application profile in your Store developer account! Next you’ll go back to Visual Studio to create a package to upload your app to this new application profile.

27. In Visual Studio you should now see the dialog updated to include your new application. Press the Next button.

clip_image053

 

28. Now press the Associate button.

clip_image055

29. In Visual Studio Solution Explorer, delete the file ending in TemporaryKey.pfx, by selecting it and clicking the right mouse button to bring up the dialog, then clicking delete. DO NOT DELETE the one ending in StoreKey.pfx.

.clip_image056

Press OK when prompted to confirm you want to delete permanently

clip_image058

30. Select the Store -> Capture Screenshots… option by clicking the right mouse button on the project in Solution Explorer.

clip_image060

Press OK at the prompt.

clip_image062

31. The Simulator should automatically start and begin running your application. Play the game to some interesting points you want to highlight, then click the Camera button on the right to take one or more screen shots. You will need these later when you finish the application profile in your Store developer account.

The screen shots will be stored by default in your My Pictures library, in a directory called Windows Simulator.

clip_image064

32. Back in Visual Studio, select the Store, Create App Packages… option

clip_image066

33. On the resulting dialog, leave Yes selected and press the Sign in button, to sign into your store account again.

clip_image068 clip_image070

34. Select your app from the list, and press the Next button.

clip_image072

35. On the screen that follows, press Create

clip_image074

36. On the next screen, click the link labelled Output location; that will open a File Explorer window that you should leave open.
You can optionally run the Windows Application Certification Test Kit locally to make sure you’ve made all the correct changes to the template.

clip_image076

37. Continue editing your application profile on your Windows Store account Developer Dashboard. If you no longer have the site up, navigate to https://dev.windows.com, click the Dashboard menu, and then Edit your existing application profile.

clip_image078

38. Packages

clip_image080

Drag the appxupload file from the File Explorer windows over to the Packages field on the web page, and wait for the transfer to complete.

When it’s done, press the Save button.

clip_image082

39. Description

clip_image084 clip_image086

You’ll need to provide description information and graphics for your application listing on the Windows Store; see the table below for a description of these items as well as which of them are required.

Description (required)

A plain text description of your applications

App features

 

Screenshots (at least one required)

Click the Add image link and browse to the screenshots you took earlier (in the My Pictures/Windows Simulator) directory. You will also enter some short text for each screen shot.

Description of update

Leave blank

Recommended hardware

Leave blank

Keywords

Provide search terms to help users find your app

Copyright and trademark info (required)

Use text like “Copyright 2013, your-publisher-name

Promotional images

Leave blank

Website

Leave blank

Support contact info (required)

Enter your e-mail address

Privacy policy

Leave blank (unless you have added other features that require one)

Finally, press the Save button:

clip_image088

40. Notes to testers – optional, but you must at least visit the page and click the Save button.

clip_image090

clip_image092

41. You’re done!!! Press the Submit for Certification button.

You’ll get an e-mail confirming the certification, and you should hear within a couple of days (or even sooner) via another e-mail if your application has passed certification!

clip_image094

 

 

 

Don’t forget to submit your app to App Madness  you have a chance to win $100.