Share via


Azure: Replicate On-premise Domain Controller To Azure Virtual Machine

Back to top

Overview

As time passes, more and more IT professionals want to exploit the potential of the cloud. In this article, we will talk about how we can do an On-Premise Domain Controller replica to an Azure Virtual Machine.

Back to top

Requirements

On-Premises Configuration

  • Existing Domain Controller (Virtual Machine or Barebone computer)
  • VPN device

Azure Configuration

  • Valid Azure Subscription
  • Virtual Machine (with the Active Directory Service Role Installed)
  • Virtual Network

Back to top

Create Virtual Network

An Azure Virtual Network (VNet) is a representation of an on-premise network in the cloud. This means that we can create one or more subnets for Virtual Machine(s) or other Azure services. The address allocation is based on rfc1918.  In this post we will show how we can easily deploy a Virtual Network for the about this case.

From the main blade on the left side select All Services > Search {Virtual Network} >Click Virtual Networks.

Click "+Add" to start a new virtual network creation.

   

At the next step, fill in the information as the image below shows.

  

 

Setting Value
Name Type the Vnet Name
Address space The IP range for the VNet
Subscription Select the Azure Subscription
Resource Group Create a New Resource Group or Select an existing
Location Select a location for the Vnet
Subnet Name Type the Name for the Subnet
Subnet Address Range The subnet IP range in CIDR notation

Back to top

Create Gateway Subnet

A Gateway Subnet is a subnet which enables the encrypted traffic between an Azure Vnet and On-premises network. The name of this Subnet must be "GatewaySubnet" to work properly. We also can't deploy Virtual Machines or any other service. Static Public IP is not accepted and only Dynamic IP can be assigned to this service.

 In the following steps, we will create the Gateway Subnet. Through this subnet, we will achieve the communication between Vnet and Gateway. From the Virtual Network main blade, select SETTINGS - Subnets - click "+Gateway subnet".

 

Define the Address range e.g [10.1.1.0/28], and type OK

 

After the previous steps, we have two subnets, as the next image shows.

   

Back to top

Create Virtual Network Gateway

Virtual Network Gateway is used to send encrypted traffic between an azure VNet and an On-Premises network over the Internet. There are several types of connections that are supported: Site-to-Site, Point-to-Site, VNet-to-VNet, Multi-Site, ExpressRoute. At the instructions below we will learn how easy is to create a Virtual Network Gateway.

At the next steps, we are going to create the Virtual Network Gateway. Search for the service "Virtual network gateway", click the first result as the image below shows and at the next blade click Create.

 

At the {Create virtual network gateway} blade fill all the information and click Create to start the deployment. 

Setting  Value 
Name Type the Virtual Network Gateway Name 
Gateway Type Select VPN type 
VPN Type Select Route-based VPN type 
SKU For this demo we select the Basic SKU 
Virtual Network Select the Vnet, which contains the Virtual Network Gateway Subnet
Public IP Address Type a Name for the Virtual Network Gateway Public IP
Subscription Select the Azure Subscription

Note

The Virtual Network Gateway deployment can take up to 40 minutes. To be exact for this deployment takes 32 minutes and 37 seconds.

More details about the Virtual Network Gateway Settings:

The Local Network Gateway refers to the on-premises location.

Back to top

Create Local Network Gateway

The local network gateway is a representation of the on-premises local network. By following the next steps we able to create a new Local Network Gateway.

Search for the service {local Network Gateway}, select the first result and click the button Create.

 

A new blade opens and we must type the information for the Local Network Gateway, as the image below shows.

Setting Value
Name Type the Local Network Gateway name
IP address Type the On-Premises VPN device IP
Address space Type the on-premises address range
Subscription Select the Azure Subscription
Resource Group Select the Resource Group
Location Select the same location as the other resource are

Back to top

Add Connection for Site-To-Site VPN

At the next step, we must create a connection in the Virtual Network Gateway. Open the Virtual Network Gateway in the left blade select SETTINGS - Connections and click +Add.

In the new blade type all the necessary information (as the next image shows), and click OK.

  

Setting Value
Name Type the S2S connection name
Connection Type Select Site-to-site(IPSec) type
Virtual Network Gateway Select the Virtual Network Gateway
Local Network Gateway Select the Local Network Gateway
Shared Key(PSK) Type a Shared key(PSK)

Once we've completed all of the above steps we are ready to make the final step and this is the VPN device configuration. The next image shows what will be the connection status on a step before we engage Azure and On-Premise infrastructures.

VPN Device Configuration

First, we must click to Download the configuration for the device. We can select from a list of compatible vendors with Azure. 

Setting Value
Device Vendor Select the device vendor, e.g Cisco
Device Family Select the device family, e.g. ASA
Firmware Version  Select the device firmware version, e.g. Cisco_ASA-9.8+_RouteBased(BGP-over-IKEv2)

Note

Since we download the configuration script, we must replace the parameters at the points that the keyword "REPLACE" appears.

Links for additional configuration information:

Back to top

Create Azure Virtual Machine

After we successfully deploy the Site-To-Site VPN, then we proceed with the Azure Virtual Machine setup. At the step below we can see how to deploy the VM.

Step 1. The Basics blade

Fill in the information in the Basics blade.

  

Step 2. The Settings blade

Following the wizard steps, complete the rest settings as the image below shows and click OK.

  

Step 3. The Validation

In the last step, we see the message that the validation passed and by clicking the Create button the deployment starts. 

Back to top

Azure Virtual Machine Domain Controller

At the following steps, we will add the server role and configure the replication procedure. In this post, we can call it as Backup Domain Controller (BDC) because it will be a replica of the Primary Domain Controller (PDC).

Add Roles and Features Wizard

This wizard will help us enable the domain controller role on the Windows Azure Virtual Machine. We just need to follow the next steps.

Step 1. Server Roles

Select the Active Directory Domain Services role and click Next>

Step 2. Results

By following the wizard steps, the role installation starts

Back to top

Domain Controller Configuration

Step 1. Promote server to Domain Controller

After the installation finishes, select Promote this server to a domain controller.

  

Step 2. Deployment Configuration

At the first wizard page click select... to  Add a domain controller to an existing domain, type the domain name, e.g cloudopszone.com and click Next > 

Step 3.Select domain from the forest

Type the on-premise administrator credentials and after that select the domain from the forest.

Step 4. Domain Controller Options

Select Domain Name System (DNS) server, **Global Catalog (GC), **from the Site Name drop-down menu select Default-First-Site-Name, type the Directory Services Restore Mode password and click Next>

Step 5. DNS Options

Do NOT check Update DNS delegation and click Next>

Step 6. Additional Options

Select from the Replicate from the drop-down menu, the name of the On-Premises Domain Controller name.

Step 7.Paths

In this demo, we use the default paths, BUT the suggested method is to use a different drive NOT the system.

Step 8. Prerequisites Check

Check the results from the  Prerequisites Check and if everything is ok, click Install to begin the installation.

Step 9. Results

At the final step, we get the message that the server was successfully configured as a domain controller.  

Click the button Close, and now the replication has started! You can check the users in the Domain Controller User folder.

Back to top

Conclusion

In this post, we talked about how a DevOp or an IT Engineer can sync an On-Premise Domain Controller to an Azure Virtual Machine with the Domain Controller role enabled. We must pay particular attention to the Site-to-Site VPN because this is the communication channel between Azure VNet and the Local Area Network.

Back to top

References

Back to top