Containers enable you to host the Sentiment Analysis API on your own infrastructure. If you have security or data governance requirements that can't be fulfilled by calling Sentiment Analysis remotely, then containers might be a good option.
If you don't have an Azure subscription, create a free account before you begin.
Prerequisites
You must meet the following prerequisites before using Sentiment Analysis containers. If you don't have an Azure subscription, create a free account before you begin.
Docker installed on a host computer. Docker must be configured to allow the containers to connect with and send billing data to Azure.
On Windows, Docker must also be configured to support Linux containers.
Three primary parameters for all Azure AI containers are required. The Microsoft Software License Terms must be present with a value of accept. An Endpoint URI and API key are also needed.
Endpoint URI
The {ENDPOINT_URI} value is available on the Azure portal Overview page of the corresponding Azure AI services resource. Go to the Overview page, hover over the endpoint, and a Copy to clipboard icon appears. Copy and use the endpoint where needed.
Keys
The {API_KEY} value is used to start the container and is available on the Azure portal's Keys page of the corresponding Azure AI services resource. Go to the Keys page, and select the Copy to clipboard icon.
Important
These subscription keys are used to access your Azure AI services API. Don't share your keys. Store them securely. For example, use Azure Key Vault. We also recommend that you regenerate these keys regularly. Only one key is necessary to make an API call. When you regenerate the first key, you can use the second key for continued access to the service.
Host computer requirements and recommendations
The host is an x64-based computer that runs the Docker container. It can be a computer on your premises or a Docker hosting service in Azure, such as:
The following table describes the minimum and recommended specifications for the available container. Each CPU core must be at least 2.6 gigahertz (GHz) or faster. The allowable Transactions Per Second (TPS) are also listed.
Minimum host specs
Recommended host specs
Minimum TPS
Maximum TPS
Sentiment Analysis
1 core, 2GB memory
4 cores, 8GB memory
15
30
CPU core and memory correspond to the --cpus and --memory settings, which are used as part of the docker run command.
Get the container image with docker pull
The Sentiment Analysis container image can be found on the mcr.microsoft.com container registry syndicate. It resides within the azure-cognitive-services/textanalytics/ repository and is named sentiment. The fully qualified container image name is, mcr.microsoft.com/azure-cognitive-services/textanalytics/sentiment
To use the latest version of the container, you can use the latest tag, which is for English. You can also find a full list of containers for supported languages using the tags on the MCR.
The sentiment analysis container v3 container is available in several languages. To download the container for the English container, use the command below.
You can use the docker images command to list your downloaded container images. For example, the following command lists the ID, repository, and tag of each downloaded container image, formatted as a table:
docker images --format "table {{.ID}}\t{{.Repository}}\t{{.Tag}}"
IMAGE ID REPOSITORY TAG
<image-id> <repository-path/name> <tag-name>
Run the container with docker run
Once the container is on the host computer, use the docker run command to run the containers. The container will continue to run until you stop it.
Important
The docker commands in the following sections use the back slash, \, as a line continuation character. Replace or remove this based on your host operating system's requirements.
The Eula, Billing, and ApiKey options must be specified to run the container; otherwise, the container won't start. For more information, see Billing.
To run the Sentiment Analysis container, execute the following docker run command. Replace the placeholders below with your own values:
Placeholder
Value
Format or example
{API_KEY}
The key for your Language resource. You can find it on your resource's Key and endpoint page, on the Azure portal.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
{ENDPOINT_URI}
The endpoint for accessing the API. You can find it on your resource's Key and endpoint page, on the Azure portal.
Runs a Sentiment Analysis container from the container image
Allocates one CPU core and 8 gigabytes (GB) of memory
Exposes TCP port 5000 and allocates a pseudo-TTY for the container
Automatically removes the container after it exits. The container image is still available on the host computer.
Run multiple containers on the same host
If you intend to run multiple containers with exposed ports, make sure to run each container with a different exposed port. For example, run the first container on port 5000 and the second container on port 5001.
You can have this container and a different Azure AI services container running on the HOST together. You also can have multiple containers of the same Azure AI services container running.
Query the container's prediction endpoint
The container provides REST-based query prediction endpoint APIs.
Use the host, http://localhost:5000, for container APIs.
Validate that a container is running
There are several ways to validate that the container is running. Locate the External IP address and exposed port of the container in question, and open your favorite web browser. Use the various request URLs that follow to validate the container is running. The example request URLs listed here are http://localhost:5000, but your specific container might vary. Make sure to rely on your container's External IP address and exposed port.
Request URL
Purpose
http://localhost:5000/
The container provides a home page.
http://localhost:5000/ready
Requested with GET, this URL provides a verification that the container is ready to accept a query against the model. This request can be used for Kubernetes liveness and readiness probes.
http://localhost:5000/status
Also requested with GET, this URL verifies if the api-key used to start the container is valid without causing an endpoint query. This request can be used for Kubernetes liveness and readiness probes.
http://localhost:5000/swagger
The container provides a full set of documentation for the endpoints and a Try it out feature. With this feature, you can enter your settings into a web-based HTML form and make the query without having to write any code. After the query returns, an example CURL command is provided to demonstrate the HTTP headers and body format that's required.
Run the container disconnected from the internet
To use this container disconnected from the internet, you must first request access by filling out an application, and purchasing a commitment plan. See Use Docker containers in disconnected environments for more information.
If you have been approved to run the container disconnected from the internet, use the following example shows the formatting of the docker run command you'll use, with placeholder values. Replace these placeholder values with your own values.
The DownloadLicense=True parameter in your docker run command will download a license file that will enable your Docker container to run when it isn't connected to the internet. It also contains an expiration date, after which the license file will be invalid to run the container. You can only use a license file with the appropriate container that you've been approved for. For example, you can't use a license file for a speech to text container with a Document Intelligence container.
Once the license file has been downloaded, you can run the container in a disconnected environment. The following example shows the formatting of the docker run command you'll use, with placeholder values. Replace these placeholder values with your own values.
Wherever the container is run, the license file must be mounted to the container and the location of the license folder on the container's local filesystem must be specified with Mounts:License=. An output mount must also be specified so that billing usage records can be written.
To shut down the container, in the command-line environment where the container is running, select Ctrl+C.
Troubleshooting
If you run the container with an output mount and logging enabled, the container generates log files that are helpful to troubleshoot issues that happen while starting or running the container.
The Sentiment Analysis containers send billing information to Azure, using a Language resource on your Azure account.
Queries to the container are billed at the pricing tier of the Azure resource that's used for the ApiKey parameter.
Azure AI services containers aren't licensed to run without being connected to the metering or billing endpoint. You must enable the containers to communicate billing information with the billing endpoint at all times. Azure AI services containers don't send customer data, such as the image or text that's being analyzed, to Microsoft.
Connect to Azure
The container needs the billing argument values to run. These values allow the container to connect to the billing endpoint. The container reports usage about every 10 to 15 minutes. If the container doesn't connect to Azure within the allowed time window, the container continues to run but doesn't serve queries until the billing endpoint is restored. The connection is attempted 10 times at the same time interval of 10 to 15 minutes. If it can't connect to the billing endpoint within the 10 tries, the container stops serving requests. See the Azure AI services container FAQ for an example of the information sent to Microsoft for billing.
Billing arguments
The docker run command will start the container when all three of the following options are provided with valid values:
Option
Description
ApiKey
The API key of the Azure AI services resource that's used to track billing information. The value of this option must be set to an API key for the provisioned resource that's specified in Billing.
Billing
The endpoint of the Azure AI services resource that's used to track billing information. The value of this option must be set to the endpoint URI of a provisioned Azure resource.
Eula
Indicates that you accepted the license for the container. The value of this option must be set to accept.
In this article, you learned concepts and workflow for downloading, installing, and running Sentiment Analysis containers. In summary:
Sentiment Analysis provides Linux containers for Docker
Container images are downloaded from the Microsoft Container Registry (MCR).
Container images run in Docker.
You must specify billing information when instantiating a container.
Important
Azure AI containers are not licensed to run without being connected to Azure for metering. Customers need to enable the containers to communicate billing information with the metering service at all times. Azure AI containers do not send customer data (e.g. text that is being analyzed) to Microsoft.