Create and configure an Azure Kubernetes Services (AKS) cluster to use virtual nodes using the Azure CLI

This article shows you how to use the Azure CLI to create and configure the virtual network resources and AKS cluster, then enable virtual nodes.

Before you begin

Virtual nodes enable network communication between pods that run in Azure Container Instances (ACI) and the AKS cluster. To provide this communication, a virtual network subnet is created and delegated permissions are assigned. Virtual nodes only work with AKS clusters created using advanced networking (Azure CNI). By default, AKS clusters are created with basic networking (kubenet). This article shows you how to create a virtual network and subnets, then deploy an AKS cluster that uses advanced networking.


Before using virtual nodes with AKS, review both the limitations of AKS virtual nodes and the virtual networking limitations of ACI. These limitations affect the location, networking configuration, and other configuration details of both your AKS cluster and the virtual nodes.

If you have not previously used ACI, register the service provider with your subscription. You can check the status of the ACI provider registration using the az provider list command, as shown in the following example:

az provider list --query "[?contains(namespace,'Microsoft.ContainerInstance')]" -o table

The Microsoft.ContainerInstance provider should report as Registered, as shown in the following example output:

Namespace                    RegistrationState    RegistrationPolicy
---------------------------  -------------------  --------------------
Microsoft.ContainerInstance  Registered           RegistrationRequired

If the provider shows as NotRegistered, register the provider using the az provider register as shown in the following example:

az provider register --namespace Microsoft.ContainerInstance

Launch Azure Cloud Shell

The Azure Cloud Shell is a free interactive shell that you can use to run the steps in this article. It has common Azure tools preinstalled and configured to use with your account.

To open the Cloud Shell, select Try it from the upper right corner of a code block. You can also launch Cloud Shell in a separate browser tab by going to Select Copy to copy the blocks of code, paste it into the Cloud Shell, and press enter to run it.

If you prefer to install and use the CLI locally, this article requires Azure CLI version 2.0.49 or later. Run az --version to find the version. If you need to install or upgrade, see Install Azure CLI.

Create a resource group

An Azure resource group is a logical group in which Azure resources are deployed and managed. Create a resource group with the az group create command. The following example creates a resource group named myResourceGroup in the westus location.

az group create --name myResourceGroup --location westus

Create a virtual network


Virtual node requires a custom virtual network and associated subnet. It can't be associated with the same virtual network the AKS cluster is deployed to.

Create a virtual network using the az network vnet create command. The following example creates a virtual network name myVnet with an address prefix of, and a subnet named myAKSSubnet. The address prefix of this subnet defaults to

az network vnet create \
    --resource-group myResourceGroup \
    --name myVnet \
    --address-prefixes \
    --subnet-name myAKSSubnet \

Now create an additional subnet for virtual nodes using the az network vnet subnet create command. The following example creates a subnet named myVirtualNodeSubnet with the address prefix of

az network vnet subnet create \
    --resource-group myResourceGroup \
    --vnet-name myVnet \
    --name myVirtualNodeSubnet \

Create an AKS cluster with managed identity

Instead of using a system-assigned identity, you can also use a user-assigned identity. For more information, see Use managed identities.

You deploy an AKS cluster into the AKS subnet created in a previous step. Get the ID of this subnet using az network vnet subnet show:

az network vnet subnet show --resource-group myResourceGroup --vnet-name myVnet --name myAKSSubnet --query id -o tsv

Use the az aks create command to create an AKS cluster. The following example creates a cluster named myAKSCluster with one node. Replace <subnetId> with the ID obtained in the previous step.

az aks create \
    --resource-group myResourceGroup \
    --name myAKSCluster \
    --node-count 1 \
    --network-plugin azure \
    --vnet-subnet-id <subnetId> \

After several minutes, the command completes and returns JSON-formatted information about the cluster.

Enable virtual nodes addon

To enable virtual nodes, now use the az aks enable-addons command. The following example uses the subnet named myVirtualNodeSubnet created in a previous step:

az aks enable-addons \
    --resource-group myResourceGroup \
    --name myAKSCluster \
    --addons virtual-node \
    --subnet-name myVirtualNodeSubnet

Connect to the cluster

To configure kubectl to connect to your Kubernetes cluster, use the az aks get-credentials command. This step downloads credentials and configures the Kubernetes CLI to use them.

az aks get-credentials --resource-group myResourceGroup --name myAKSCluster

To verify the connection to your cluster, use the kubectl get command to return a list of the cluster nodes.

kubectl get nodes

The following example output shows the single VM node created and then the virtual node for Linux, virtual-node-aci-linux:

NAME                          STATUS    ROLES     AGE       VERSION
virtual-node-aci-linux        Ready     agent     28m       v1.11.2
aks-agentpool-14693408-0      Ready     agent     32m       v1.11.2

Deploy a sample app

Create a file named virtual-node.yaml and copy in the following YAML. To schedule the container on the node, a nodeSelector and toleration are defined.

apiVersion: apps/v1
kind: Deployment
  name: aci-helloworld
  replicas: 1
      app: aci-helloworld
        app: aci-helloworld
      - name: aci-helloworld
        - containerPort: 80
      nodeSelector: agent linux
        type: virtual-kubelet
      - key:
        operator: Exists
      - key:
        effect: NoSchedule

Run the application with the kubectl apply command.

kubectl apply -f virtual-node.yaml

Use the kubectl get pods command with the -o wide argument to output a list of pods and the scheduled node. Notice that the aci-helloworld pod has been scheduled on the virtual-node-aci-linux node.

kubectl get pods -o wide
NAME                            READY     STATUS    RESTARTS   AGE       IP           NODE
aci-helloworld-9b55975f-bnmfl   1/1       Running   0          4m   virtual-node-aci-linux

The pod is assigned an internal IP address from the Azure virtual network subnet delegated for use with virtual nodes.


If you use images stored in Azure Container Registry, configure and use a Kubernetes secret. A current limitation of virtual nodes is that you can't use integrated Azure AD service principal authentication. If you don't use a secret, pods scheduled on virtual nodes fail to start and report the error HTTP response status code 400 error code "InaccessibleImage".

Test the virtual node pod

To test the pod running on the virtual node, browse to the demo application with a web client. As the pod is assigned an internal IP address, you can quickly test this connectivity from another pod on the AKS cluster. Create a test pod and attach a terminal session to it:

kubectl run -it --rm testvk

Install curl in the pod using apt-get:

apt-get update && apt-get install -y curl

Now access the address of your pod using curl, such as Provide your own internal IP address shown in the previous kubectl get pods command:

curl -L

The demo application is displayed, as shown in the following condensed example output:

  <title>Welcome to Azure Container Instances!</title>

Close the terminal session to your test pod with exit. When your session is ended, the pod is the deleted.

Remove virtual nodes

If you no longer wish to use virtual nodes, you can disable them using the az aks disable-addons command.

If necessary, go to to open Azure Cloud Shell in your browser.

First, delete the aci-helloworld pod running on the virtual node:

kubectl delete -f virtual-node.yaml

The following example command disables the Linux virtual nodes:

az aks disable-addons --resource-group myResourceGroup --name myAKSCluster --addons virtual-node

Now, remove the virtual network resources and resource group:

# Change the name of your resource group, cluster and network resources as needed

# Get AKS node resource group
NODE_RES_GROUP=$(az aks show --resource-group $RES_GROUP --name $AKS_CLUSTER --query nodeResourceGroup --output tsv)

# Get network profile ID
NETWORK_PROFILE_ID=$(az network profile list --resource-group $NODE_RES_GROUP --query "[0].id" --output tsv)

# Delete the network profile
az network profile delete --id $NETWORK_PROFILE_ID -y

# Grab the service association link ID
SAL_ID=$(az network vnet subnet show --resource-group $RES_GROUP --vnet-name $AKS_VNET --name $AKS_SUBNET --query id --output tsv)/providers/Microsoft.ContainerInstance/serviceAssociationLinks/default

# Delete the service association link for the subnet
az resource delete --ids $SAL_ID --api-version 2021-10-01

# Delete the subnet delegation to Azure Container Instances
az network vnet subnet update --resource-group $RES_GROUP --vnet-name $AKS_VNET --name $AKS_SUBNET --remove delegations

Next steps

In this article, a pod was scheduled on the virtual node and assigned a private, internal IP address. You could instead create a service deployment and route traffic to your pod through a load balancer or ingress controller. For more information, see Create a basic ingress controller in AKS.

Virtual nodes are often one component of a scaling solution in AKS. For more information on scaling solutions, see the following articles: