Share via


Linear Regression

Important

Support for Machine Learning Studio (classic) will end on 31 August 2024. We recommend you transition to Azure Machine Learning by that date.

Beginning 1 December 2021, you will not be able to create new Machine Learning Studio (classic) resources. Through 31 August 2024, you can continue to use the existing Machine Learning Studio (classic) resources.

ML Studio (classic) documentation is being retired and may not be updated in the future.

Creates a linear regression model

Category: Machine Learning / Initialize Model / Regression

Note

Applies to: Machine Learning Studio (classic) only

Similar drag-and-drop modules are available in Azure Machine Learning designer.

Module overview

This article describes how to use the Linear Regression module in Machine Learning Studio (classic), to create a linear regression model for use in an experiment. Linear regression attempts to establish a linear relationship between one or more independent variables and a numeric outcome, or dependent variable.

You use this module to define a linear regression method, and then train a model using a labeled dataset. The trained model can then be used to make predictions. Alternatively, the untrained model can be passed to Cross-Validate Model for cross-validation against a labeled data set.

More about linear regression

Linear regression is a common statistical method, which has been adopted in machine learning and enhanced with many new methods for fitting the line and measuring error. In the most basic sense, regression refers to prediction of a numeric target. Linear regression is still a good choice when you want a very simple model for a basic predictive task. Linear regression also tends to work well on high-dimensional, sparse data sets lacking complexity.

Machine Learning Studio (classic) supports a variety of regression models, in addition to linear regression. However, the term "regression" can be interpreted loosely, and some types of regression provided in other tools are not supported in Studio (classic).

  • The classic regression problem involves a single independent variable and a dependent variable. This is called simple regression. This module supports simple regression.

  • Multiple linear regression involves two or more independent variables that contribute to a single dependent variable. Problems in which multiple inputs are used to predict a single numeric outcome are also called multivariate linear regression.

    The Linear Regression module can solve these problems, as can most of the other regression modules in Studio (classic).

  • Multi-label regression is the task of predicting multiple dependent variables within a single model. For example, in multi-label logistic regression, a sample can be assigned to multiple different labels. (This is different from the task of predicting multiple levels within a single class variable.)

    This type of regression is not supported in Machine Learning. To predict multiple variables, create a separate learner for each output that you wish to predict.

For years statisticians have been developing increasingly advanced methods for regression. This is true even for linear regression. This module supports two methods to measure error and fit the regression line: ordinary least squares method, and gradient descent.

  • Gradient descent is a method that minimizes the amount of error at each step of the model training process. There are many variations on gradient descent and its optimization for various learning problems has been extensively studied. If you choose this option for Solution method, you can set a variety of parameters to control the step size, learning rate, and so forth. This option also supports use of an integrated parameter sweep.

  • Ordinary least squares is one of the most commonly used techniques in linear regression. For example, least squares is the method that is used in the Analysis Toolpak for Microsoft Excel.

    Ordinary least squares refers to the loss function, which computes error as the sum of the square of distance from the actual value to the predicted line, and fits the model by minimizing the squared error. This method assumes a strong linear relationship between the inputs and the dependent variable.

How to configure Linear Regression

This module supports two methods for fitting a regression model, with very different options:

Create a regression model using ordinary least squares

  1. Add the Linear Regression Model module to your experiment in Studio (classic).

    You can find this module in the Machine Learning category. Expand Initialize Model, expand Regression, and then drag the Linear Regression Model module to your experiment.

  2. In the Properties pane, in the Solution method dropdown list, select Ordinary Least Squares. This option specifies the computation method used to find the regression line.

  3. In L2 regularization weight, type the value to use as the weight for L2 regularization. We recommend that you use a non-zero value to avoid overfitting.

    To learn more about how regularization affects model fitting, see this article: L1 and L2 Regularization for Machine Learning

  4. Select the option, Include intercept term, if you want to view the term for the intercept.

    Deselect this option if you don't need to review the regression formula.

  5. For Random number seed, you can optionally type a value to seed the random number generator used by the model.

    Using a seed value is useful if you want to maintain the same results across different runs of the same experiment. Otherwise, the default is to use a value from the system clock.

  6. Deselect the option, Allow unknown categorical levels, if you want missing values to raise an error.

    If this option is selected, an additional level is created for each categorical column. Any levels in the test dataset that were not present in the training dataset are mapped to this additional level.

  7. Add the Train Model module to your experiment, and connect a labeled dataset.

  8. Run the experiment.

Results for ordinary least squares model

After training is complete:

  • To view the model's parameters, right-click the trainer output and select Visualize.

  • To make predictions, connect the trained model to the Score Model module, along with a dataset of new values.

  • To perform cross-validation against a labeled data set, connect the untrained model to Cross-Validate Model.

Create a regression model using online gradient descent

  1. Add the Linear Regression Model module to your experiment in Studio (classic).

    You can find this module in the Machine Learning category. Expand Initialize Model, expand Regression, and drag the Linear Regression Model module to your experiment

  2. In the Properties pane, in the Solution method dropdown list, choose Online Gradient Descent as the computation method used to find the regression line.

  3. For Create trainer mode, indicate whether you want to train the model with a predefined set of parameters, or if you want to optimize the model by using a parameter sweep.

    • Single Parameter: If you know how you want to configure the linear regression network, you can provide a specific set of values as arguments.

    • Parameter Range: If you want the algorithm to find the best parameters for you, set Create trainer mode option to Parameter Range. You can then specify multiple values for the algorithm to try.

  4. For Learning rate, specify the initial learning rate for the stochastic gradient descent optimizer.

  5. For Number of training epochs, type a value that indicates how many times the algorithm should iterate through examples. For datasets with a small number of examples, this number should be large to reach convergence.

  6. Normalize features: If you have already normalized the numeric data used to train the model, you can deselect this option. By default, the module normalizes all numeric inputs to a range between 0 and 1.

    Note

    Remember to apply the same normalization method to new data used for scoring.

  7. In L2 regularization weight, type the value to use as the weight for L2 regularization. We recommend that you use a non-zero value to avoid overfitting.

    To learn more about how regularization affects model fitting, see this article: L1 and L2 Regularization for Machine Learning

  8. Select the option, Average final hypothesis, to average the final hypothesis.

    In regression models, hypothesis testing means using some statistic to evaluate the probability of the null hypothesis, which states that there is no linear correlation between a dependent and independent variable. In many regression problems, you must test a hypothesis involving more than one variable.

    This option is enabled by default, meaning the algorithm tests a combination of the parameters where two or more parameters are involved.

  9. Select the option, Decrease learning rate, if you want the learning rate to decrease as iterations progress.

  10. For Random number seed, you can optionally type a value to seed the random number generator used by the model. Using a seed value is useful if you want to maintain the same results across different runs of the same experiment.

  11. Deselect the option, Allow unknown categorical levels, if you want missing values to raise an error.

    When this option is selected, an additional level is created for each categorical column. Any levels in the test dataset not present in the training dataset are mapped to this additional level.

  12. Add a labeled dataset and one of the training modules.

    If you are not using a parameter sweep, use the Train Model module.

    To have the algorithm find the best parameters for you, train the model using Tune Model Hyperparameters.

    Note

    If you configure the model with specific values using the Single Parameter option and then switch to the Parameter Range option, the model is trained using the minimum value in the range for each parameter.

    Conversely, if you configure specific settings when you create the model but select the Parameter Range option, the model is trained using the default values for the learner as the range of values to sweep over.

  13. Run the experiment.

Results for online gradient descent

After training is complete:

  • To make predictions, connect the trained model to the Score Model module, together with new input data.
  • To perform cross-validation against a labeled data set, connect the untrained model to Cross-Validate Model.

Examples

For examples of regression models, see these sample experiments in the Azure AI Gallery:

Technical notes

This section contains implementation details, tips, and answers to frequently asked questions.

Usage tips

Many tools support creation of linear regression, ranging from the simple to complex. For example, you can easily perform linear regression in Excel, using the Solver Toolpak, or you can code your own regression algorithm, using R, Python, or C#.

However, because linear regression is a well-established technique that is supported by many different tools, there are many different interpretations and implementations. Not all types of models are supported equally by all tools. There are also some differences in nomenclature to observe.

  • Regression methods are often categorized by the number of response variables. For example, multiple linear regression means a model that has multiple variables to predict.

  • In Matlab, multivariate regression refers to a model that has multiple response variables.

  • In Machine Learning, regression models support a single response variable.

  • In the R language, the features provided for linear regression depend on the package you are using. For example, the glm package will give you the ability to create a logistic regression model with multiple independent variables. In general, Machine Learning Studio (classic) provides the same functionality as the R glm package.

We recommend that you use this module, Linear Regression, for typical regression problems.

In contrast, if you are using multiple variables to predict a class value, we recommend the Two-Class Logistic Regression or Multiclass Logistic Regression modules.

If you want to use other linear regression packages that are available for the R language, we recommend that you use the Execute R Script module and call the lm or glm packages, which are included in the runtime environment of Machine Learning Studio (classic).

Module parameters

Name Range Type Default Description
Normalize features any Boolean true Indicate whether instances should be normalized
Average final hypothesis any Boolean true Indicate whether the final hypothesis should be averaged
Learning rate >=double.Epsilon Float 0.1 Specify the initial learning rate for the stochastic gradient descent optimizer
Number of training epochs >=0 Integer 10 Specify how many times the algorithm should iterate through examples. For datasets with a small number of examples, this number should be large to reach convergence.
Decrease learning rate Any Boolean true Indicate whether the learning rate should decrease as iterations progress
L2 regularization weight >=0.0 Float 0.001 Specify the weight for L2 regularization. Use a non-zero value to avoid overfitting.
Random number seed any Integer Specify a value to seed the random number generator used by the model. Leave blank for default.
Allow unknown categorical levels any Boolean true Indicate whether an additional level should be created for each categorical column. Any levels in the test dataset not available in the training dataset are mapped to this additional level.
Include intercept term Any Boolean True Indicate whether an additional term should be added for the intercept

Outputs

Name Type Description
Untrained model ILearner interface An untrained regression model

See also

Regression