Tutorial: Migrate online from AWS RDS PostgreSQL to Azure Database for PostgreSQL with the migration service Preview

Article
06/19/2024

This article explores how to migrate your PostgreSQL database from AWS RDS to Azure Database for PostgreSQL online.

The migration service in Azure Database for PostgreSQL is a fully managed service integrated into the Azure portal and Azure CLI. It's designed to simplify your migration journey to Azure Database for PostgreSQL server.

Prerequisites
Perform the migration
Monitor the migration
Cutover
Check the migration when completed

Prerequisites

To complete the migration, you need the following prerequisites:

Before starting the migration with the Azure Database for PostgreSQL migration service, it is important to fulfill the following prerequisites, specifically designed for online migration scenarios.

Verify the source version
Install test_decoding - Source Setup
Configure target setup
Enable CDC as a source
Configure network setup
Enable extensions
Check server parameters
Check users and roles

Verify the source version

The source PostgreSQL server version must be 9.5 or later.

If the source PostgreSQL version is less than 9.5, upgrade it to 9.5 or higher before you start the migration.

Install test_decoding - Source Setup

test_decoding receives WAL through the logical decoding mechanism and decodes it into text representations of the operations performed.
In Amazon RDS for PostgreSQL, the test_decoding plugin is preinstalled and ready for logical replication. This allows you to easily set up logical replication slots and stream WAL changes, facilitating use cases such as change data capture (CDC) or replication to external systems.
For more information about the test-decoding plugin, see the PostgreSQL documentation

Configure target setup

Before migrating, Azure Database for PostgreSQL – Flexible server must be created.
SKU provisioned for Azure Database for PostgreSQL – Flexible server should match with the source.
To create a new Azure Database for PostgreSQL, visit Create an Azure Database for PostgreSQL

Enable CDC as a source

test_decoding logical decoding plugin captures the changed records from the source.
In the source, PostgreSQL instance, modify the following parameters by creating a new parameter group:
- Set rds.logical_replication = 1
- Set max_replication_slots to a value greater than one; the value should be greater than the number of databases selected for migration.
- Set max_wal_senders to a value greater than one. It should be at least the same as max_replication_slots, plus the number of senders already used on your instance.
- The wal_sender_timeout parameter ends inactive replication connections longer than the specified number of milliseconds. The default for an AWS RDS for PostgreSQL instance is 30000 milliseconds (30 seconds). Setting the value to 0 (zero) disables the timeout mechanism and is a valid setting for migration.

Configure network setup

Network setup is crucial for the migration service to function correctly. Ensure that the source PostgreSQL server can communicate with the target Azure Database for PostgreSQL server. The following network configurations are essential for a successful migration.

For information about network setup, visit Network guide for migration service.

Enable extensions

To ensure a successful migration with the migration service in Azure Database for PostgreSQL, you might need to verify extensions to your source PostgreSQL instance. Extensions provide additional functionality and features that might be required for your application. Make sure to verify the extensions on the source PostgreSQL instance before initiating the migration process.

Enable supported extensions identified in the source PostgreSQL instance on the target Azure Database for PostgreSQL flexible server.

For more information about extensions, visit Extensions in Azure Database for PostgreSQL.

Note

A restart is required when there are any changes to the shared_preload_libraries parameter.

Check server parameters

These parameters aren't automatically migrated to the target environment and must be manually configured.

Match server parameter values from the source PostgreSQL database to the Azure Database for PostgreSQL by accessing the "Server parameters" section in the Azure portal and manually updating the values accordingly.
Save the parameter changes and restart the Azure Database for PostgreSQL to apply the new configuration if necessary.

Check users and roles

When migrating to Azure Database for PostgreSQL, it's essential to address the migration of users and roles separately, as they require manual intervention:

Manual Migration of Users and Roles: Users and their associated roles must be manually migrated to the Azure Database for PostgreSQL. To facilitate this process, you can use the pg_dumpall utility with the --globals-only flag to export global objects such as roles and user accounts. Execute the following command, replacing <<username>> with the actual username and <<filename>> with your desired output file name:
```
pg_dumpall --globals-only -U <<username>> -f <<filename>>.sql
```
Restriction on Superuser Roles: Azure Database for PostgreSQL doesn't support superuser roles. Therefore, users with superuser privileges must have those privileges removed before migration. Ensure that you adjust the permissions and roles accordingly.

By following these steps, you can ensure that user accounts and roles are correctly migrated to the Azure Database for PostgreSQL without encountering issues related to superuser restrictions.

Disable high availability (reliability) and read replicas in the target

Disabling high availability (reliability) and reading replicas in the target environment is essential. These features should be enabled only after the migration has been completed.
By following these guidelines, you can help ensure a smooth migration process without the added variables introduced by HA and Read Replicas. Once the migration is complete and the database is stable, you can proceed to enable these features to enhance the availability and scalability of your database environment in Azure.

Perform the migration

You can migrate by using the Azure portal or the Azure CLI.

Portal
CLI

The Azure portal provides a simple and intuitive wizard-based experience that guides you through migration. Following the steps outlined in this tutorial, you can seamlessly transfer your database to Azure Database for PostgreSQL - Flexible Server and take advantage of its powerful features and scalability.

To migrate with the Azure portal, you first configure the migration task, connect to the source and target, and then perform the migration.

Configure the migration task

The migration service comes with a simple, wizard-based experience on the Azure portal. Here's how to start:

Open your web browser and go to the portal. Enter your credentials to sign in. The default view is your service dashboard.
Go to your Azure Database for PostgreSQL Flexible Server target.
In the Flexible Server's Overview tab, on the left menu, scroll down to Migration and select it.
Select the Create button to migrate from AWS RDS to Azure Database for PostgreSQL - Flexible Server. If this is your first time using the migration service, an empty grid appears with a prompt to begin your first migration.

If you've already created migrations to your Azure Database for PostgreSQL target, the grid contains information about attempted migrations.
Select the **Create ** button. Then, you go through a wizard-based series of tabs to create a migration into this Azure Database for PostgreSQL target from the PostgreSQL source instance.

Setup

The first tab is the Setup tab, where the user needs to provide migration details like migration name source type to initiate the migrations.

Migration name is the unique identifier for each migration to this Flexible Server target. This field accepts only alphanumeric characters and doesn't accept any special characters except a hyphen (-). The name can't start with a hyphen and should be unique for a target server. No two migrations to the same Flexible Server target can have the same name.
Source Server Type—Depending on your PostgreSQL source, you can select AWS RDS for PostgreSQL or Azure Database for PostgreSQL—single server, on-premises, or Azure VM.
Migration Option allows you to perform validations before triggering a migration. You can pick any of the following options:
- Validate - Checks your server and database readiness for migration to the target.
- Migrate - Skips validations and starts migrations.
- Validate and Migrate—Performs validation before triggering a migration. The migration is triggered only if there are no validation failures.

Choosing the Validate or Validate and Migrate option is always a good practice when performing premigration validations before running the migration. To learn more about the premigration validation, refer to this documentation.

Migration mode allows you to pick the mode for the migration. Offline is the default option.

Select the Next: Connect to the Source button.

Select Runtime Server

The migration Runtime Server is a specialized feature within the migration service, designed to act as an intermediary server during migration. It's a separate Azure Database for PostgreSQL - Flexible Server instance that isn't the target server but is used to facilitate the migration of databases from a source environment that is only accessible via a private network.

For more information about the Runtime Server, visit the Migration Runtime Server.

Screenshot of the Migration Runtime Server page.

Connect to source

The Connect to Source tab prompts you to provide details related to the Source selected in the Setup Tab, which is the Source of the databases.

Server Name - Provide the Hostname or the IP address of the source PostgreSQL instance
Port - Port number of the Source server
Server admin login name - Username of the source PostgreSQL server
Password - Password of the Source PostgreSQL server
SSL Mode—The supported values are preferred and required. When the SSL at the Source PostgreSQL server is OFF, use SSLMODE=prefer. If the SSL at the source server is ON, use SSLMODE=require. SSL values can be determined in the Postgresql.conf file.
Test Connection—Performs the connectivity test between the target and the Source. Once the connection is successful, users can proceed with the next step. Otherwise, we need to identify the networking issues between the target and the Source and verify the username/password for the Source. Establishing a test connection takes a few minutes.

After the successful test connection, select the Next: Select Migration target

Select migration target

The select migration target tab displays metadata for the Flexible Server target, such as the subscription name, resource group, server name, location, and PostgreSQL version.

Screenshot of the connect target migration screen.

Admin username - Admin username of the target PostgreSQL server
Password - Password of the target PostgreSQL server
Test Connection - Performs the connectivity test between the target and Source. Once the connection is successful, users can proceed with the next step. Otherwise, we need to identify the networking issues between the target and the Source and verify the username/password for the target. Test connection takes a few minutes to establish a connection between the target and the source.

After the successful test connection, select the Next: Select Database(s) for Migration

Select databases for migration

Under this tab, a list of user databases is inside the source server selected in the setup tab. You can select and migrate up to eight databases in a single migration attempt. If there are more than eight user databases, the migration process is repeated between the source and target servers for the next set of databases.

Screenshot of FetchDBmigration.

After selecting the databases, select the Next: Summary

Summary

The Summary tab summarizes all the Source and target details for creating the validation or migration. Review the details and select the start button.

Screenshot of Summary migration.

Monitor the migration

After you select the start button, a notification will appear in a few seconds saying that the validation or migration creation is successful. You'll then be automatically redirected to the Migration page of Flexible Server, which has a new entry for the recently created validation or migration.

The grid that displays the migrations has these columns: Name, Status, Migration mode, Migration type, Source server, Source server type, Databases, Duration, and Start time. The entries are displayed in the descending order of the start time, with the most recent entry at the top. You can use the refresh button to refresh the status of the validation or migration. Select the migration name in the grid to see the associated details.

When the validation or migration is created, it moves to the InProgress state and PerformingPreRequisiteSteps substrate. The workflow takes 2-3 minutes to set up the migration infrastructure and network connections.

Migration details

In the Setup tab, we have selected the migration option as Migrate and Validate. In this scenario, validations are performed first before migration starts. After the PerformingPreRequisiteSteps substate is completed, the workflow moves into the substate of Validation in Progress.

If validation has errors, the migration moves into a Failed state.
If validation completes without error, the migration starts, and the workflow moves into the substate of Migrating Data.

You can see the results of validation and migration at the instance and database level.

Some possible migration states:

Migration states

State	Description
InProgress	The migration infrastructure setup is underway, or the actual data migration is in progress.
Canceled	The migration is canceled or deleted.
Failed	The migration has failed.
Validation Failed	The validation has failed.
Succeeded	The migration has succeeded and is complete.
WaitingForUserAction	Applicable only for online migration. Waiting for user action to perform cutover.

Migration substates

Substate	Description
PerformingPreRequisiteSteps	Infrastructure setup is underway for data migration.
Validation in Progress	Validation is in progress.
MigratingData	Data migration is in progress.
CompletingMigration	Migration is in the final stages of completion.
Completed	Migration has been completed.
Failed	Migration has failed.

Validation substates

Substate	Description
Failed	Validation has failed.
Succeeded	Validation is successful.
Warning	Validation is in warning.

Cutover

If there are both Migrate and Validate and Migrate, completing the Online migration requires another step—the user must take a Cutover action. After the copy/clone of the base data is complete, the migration moves to the WaitingForUserAction state and the `WaitingForCutoverTrigger' substate. In this state, the user can trigger the cutover from the portal by selecting the migration.

Before initiating cutover, it's important to ensure that:

Writes to the Source are stopped - Latency value is 0 or close to 0. The Latency information can be obtained from the migration details screen as shown below:
latency value decreases to 0 or close to 0
The latency value indicates when the target last synced with the Source. At this point, writing to the Source can be stopped, and cutover can be initiated. In case there's heavy traffic at the Source, it's recommended to stop writes first so that Latency can come close to 0, and then a cutover is initiated. The Cutover operation applies all pending changes from the Source to the Target and completes the migration. If you trigger a "Cutover" even with nonzero Latency, the replication stops until that point in time. All the data is on the Source until the cutover point is applied to the target. Say a latency was 15 minutes at the cutover point, so all the changed data in the last 15 minutes are applied to the target. Time depends on the backlog of changes occurring in the last 15 minutes. Hence, it's recommended that the Latency go to zero or near zero before triggering the cutover.
The migration moves to the Succeeded state when the Migrating Data substate or the cutover (in Online migration) finishes successfully. If there's a problem at the Migrating Data substate, the migration moves into a Failed state.

This article explores using the Azure CLI to migrate your PostgreSQL database from AWS RDS to Azure Database for PostgreSQL. The Azure CLI provides a powerful and flexible command-line interface that allows you to perform various tasks, including database migration. Following the steps outlined in this article, you can seamlessly transfer your database to Azure and take advantage of its powerful features and scalability.

To learn more about Azure CLI with the migration service, visit How to set up Azure CLI for the migration service.

Once the CLI is installed, open the command prompt and log into your Azure account using the below command.

az login

Configure the migration task

To begin the migration, you need to create a JSON file with the migration details. The JSON file contains the following information:

Edit the below placeholders << >> in the JSON lines and store them in the local machine as <<filename>>.json where the CLI is being invoked. In this tutorial, we have saved the file in C:\migration-CLI\migration_body.json

{
	"properties": {
		"SourceDBServerResourceId": "<<source hostname or IP address>>:<<port>>@<<username>>",
		"SecretParameters": {
			"AdminCredentials": {
				"SourceServerPassword": "<<Source Password>>",
				"TargetServerPassword": "<<Target Password>>"
			},
			"targetServerUserName": "<<Target username>>"
		},
		"DBsToMigrate": "<<comma separated list of databases in a array like - ["ticketdb","timedb","inventorydb"]>>",
		"OverwriteDBsInTarget": "true",
		"sourceType": "AWS_RDS",
		"sslMode": "Require"
	}
}

Run the following command to check if any migrations are running. The migration name is unique across the migrations within the Azure Database for PostgreSQL flexible server target.
```
az postgres flexible-server migration list --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --filter All
```

In the above steps, there are no migrations performed so we start with the new migration by running the following command

az postgres flexible-server migration create --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --migration-name migration1 --migration-mode online --migration-option ValidateAndMigrate --properties "C:\migration-cli\migration_body.json"

Run the following command to initiate the migration status in the previous step. You can check the status of the migration by providing the migration name

az postgres flexible-server migration show --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --migration-name migration1

The status of the migration progress is shown in the Azure CLI.
You can also see the status of the Azure Database for PostgreSQL flexible server in the Azure portal.
You can cancel any ongoing migration attempts using the cancel command. This command stops the particular migration attempt and rolls back all changes on your target server. Here's the CLI command to delete a migration:
```
az postgres flexible-server migration update cancel --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --migration-name migration1
```

Cutover

After the base data migration is complete in online migrations, the migration task moves to the WaitingForCutoverTrigger substate. In this state, the user can trigger the cutover through the CLI using the command below. The cutover can also be triggered from the portal by selecting the migration name in the migration grid.

You can also initiate the cutover from the Azure portal.

az postgres flexible-server migration update --subscription 11111111-1111-1111-1111-111111111111 --resource-group my-learning-rg --name myflexibleserver --migration-name migration1 --cutover

Check the migration when complete

After completing the databases, you need to manually validate the data between the source, and the target and verify that all the objects in the target database are successfully created.

After migration, you can perform the following tasks:

Verify the data on your flexible server and ensure it's an exact copy of the source instance.
Post verification, enable the high availability option on your flexible server as needed.
Change the SKU of the flexible server to match the application needs. This change needs a database server restart.
If you change any server parameters from their default values in the source instance, copy those server parameter values in the flexible server.
Copy other server settings, such as tags, alerts, and firewall rules (if applicable), from the source instance to the flexible server.
Make changes to your application to point the connection strings to a flexible server.
Monitor the database performance closely to see if it requires performance tuning.

Share via

Tutorial: Migrate online from AWS RDS PostgreSQL to Azure Database for PostgreSQL with the migration service Preview

Prerequisites

Verify the source version

Install test_decoding - Source Setup

Configure target setup

Enable CDC as a source

Configure network setup

Enable extensions

Check server parameters

Check users and roles

Disable high availability (reliability) and read replicas in the target

Perform the migration

Configure the migration task

Setup

Select Runtime Server

Connect to source

Select migration target

Select databases for migration

Summary

Monitor the migration

Migration details

Migration states

Migration substates

Validation substates

Cutover

Configure the migration task

Cutover

Check the migration when complete

Feedback

Feedback

Additional resources

Share via

Tutorial: Migrate online from AWS RDS PostgreSQL to Azure Database for PostgreSQL with the migration service Preview

Prerequisites

Verify the source version

Install test_decoding - Source Setup

Configure target setup

Enable CDC as a source

Configure network setup

Enable extensions

Check server parameters

Check users and roles

Disable high availability (reliability) and read replicas in the target

Perform the migration

Configure the migration task

Setup

Select Runtime Server

Connect to source

Select migration target

Select databases for migration

Summary

Monitor the migration

Migration details

Migration states

Migration substates

Validation substates

Cutover

Check the migration when complete

Related content

Feedback

Feedback

Additional resources