Service Fabric application and service manifests

This article describes how Service Fabric applications and services are defined and versioned using the ApplicationManifest.xml and ServiceManifest.xml files. For more detailed examples, see application and service manifest examples. The XML schema for these manifest files is documented in ServiceFabricServiceModel.xsd schema documentation.


The manifest XML file schema enforces correct ordering of child elements. As a partial workaround, open "C:\Program Files\Microsoft SDKs\Service Fabric\schemas\ServiceFabricServiceModel.xsd" in Visual Studio while authoring or modifying any of the Service Fabric manifests. This will allow you to check the ordering of child elements and provides intelli-sense.

Describe a service in ServiceManifest.xml

The service manifest declaratively defines the service type and version. It specifies service metadata such as service type, health properties, load-balancing metrics, service binaries, and configuration files. Put another way, it describes the code, configuration, and data packages that compose a service package to support one or more service types. A service manifest can contain multiple code, configuration, and data packages, which can be versioned independently. Here's a service manifest for the ASP.NET Core web front-end service of the Voting sample application (and here are some more detailed examples):

<?xml version="1.0" encoding="utf-8"?>
<ServiceManifest Name="VotingWebPkg"
    <!-- This is the name of your ServiceType. 
         This name must match the string used in RegisterServiceType call in Program.cs. -->
    <StatelessServiceType ServiceTypeName="VotingWebType" />

  <!-- Code package is your service executable. -->
  <CodePackage Name="Code" Version="1.0.0">

  <!-- Config package is the contents of the Config directory under PackageRoot that contains an 
       independently-updateable and versioned set of custom configuration settings for your service. -->
  <ConfigPackage Name="Config" Version="1.0.0" />

      <!-- This endpoint is used by the communication listener to obtain the port on which to 
           listen. Please note that if your service is partitioned, this port is shared with 
           replicas of different partitions that are placed in your code. -->
      <Endpoint Protocol="http" Name="ServiceEndpoint" Type="Input" Port="8080" />

Version attributes are unstructured strings and not parsed by the system. Version attributes are used to version each component for upgrades.

ServiceTypes declares what service types are supported by CodePackages in this manifest. When a service is instantiated against one of these service types, all code packages declared in this manifest are activated by running their entry points. The resulting processes are expected to register the supported service types at run time. Service types are declared at the manifest level and not the code package level. So when there are multiple code packages, they're all activated whenever the system looks for any one of the declared service types.

The executable specified by EntryPoint is typically the long-running service host. SetupEntryPoint is a privileged entry point that runs with the same credentials as Service Fabric (typically the LocalSystem account) before any other entry point. The presence of a separate setup entry point avoids having to run the service host with high privileges for extended periods of time. The executable specified by EntryPoint is run after SetupEntryPoint exits successfully. If the process ever terminates or crashes, the resulting process is monitored and restarted (beginning again with SetupEntryPoint).

Typical scenarios for using SetupEntryPoint are when you run an executable before the service starts or you perform an operation with elevated privileges. For example:

  • Setting up and initializing environment variables that the service executable needs. This isn't limited to only executables written via the Service Fabric programming models. For example, npm.exe needs some environment variables configured for deploying a Node.js application.
  • Setting up access control by installing security certificates.

For more information on how to configure the SetupEntryPoint, see Configure the policy for a service setup entry point.

EnvironmentVariables (not set in the preceding example) provides a list of environment variables that are set for this code package. Environment variables can be overridden in the ApplicationManifest.xml to provide different values for different service instances.

DataPackage (not set in the preceding example) declares a folder, named by the Name attribute, that contains arbitrary static data to be consumed by the process at run time.

ConfigPackage declares a folder, named by the Name attribute, that contains a Settings.xml file. The settings file contains sections of user-defined, key-value pair settings that the process reads back at run time. During an upgrade, if only the ConfigPackage version changes, then the running process isn't restarted. Instead, a callback notifies the process that configuration settings have changed so they can be reloaded dynamically. Here's an example Settings.xml file:

<Settings xmlns:xsd="" xmlns:xsi="" xmlns="">
  <Section Name="MyConfigurationSection">
    <Parameter Name="MySettingA" Value="Example1" />
    <Parameter Name="MySettingB" Value="Example2" />

A Service Fabric Service Endpoint is an example of a Service Fabric Resource. A Service Fabric Resource can be declared/changed without changing the compiled code. Access to the Service Fabric Resources that are specified in the service manifest can be controlled through the SecurityGroup in the application manifest. When an Endpoint Resource is defined in the service manifest, Service Fabric assigns ports from the reserved application port range when a port isn't specified explicitly. Read more about specifying or overriding endpoint resources.


By design static ports should not overlap with application port range specified in the ClusterManifest. If you specify a static port, assign it outside of application port range, otherwise it will result in port conflicts. With release 6.5CU2 we will issue a Health Warning when we detect such a conflict but let the deployment continue in sync with the shipped 6.5 behaviour. However, we may prevent the application deployment from the next major releases.

Describe an application in ApplicationManifest.xml

The application manifest declaratively describes the application type and version. It specifies service composition metadata such as stable names, partitioning scheme, instance count/replication factor, security/isolation policy, placement constraints, configuration overrides, and constituent service types. The load-balancing domains into which the application is placed are also described.

Thus, an application manifest describes elements at the application level and references one or more service manifests to compose an application type. Here's the application manifest for the Voting sample application (and here are some more detailed examples):

<?xml version="1.0" encoding="utf-8"?>
<ApplicationManifest xmlns:xsd="" xmlns:xsi="" ApplicationTypeName="VotingType" ApplicationTypeVersion="1.0.0" xmlns="">
    <Parameter Name="VotingData_MinReplicaSetSize" DefaultValue="3" />
    <Parameter Name="VotingData_PartitionCount" DefaultValue="1" />
    <Parameter Name="VotingData_TargetReplicaSetSize" DefaultValue="3" />
    <Parameter Name="VotingWeb_InstanceCount" DefaultValue="-1" />
  <!-- Import the ServiceManifest from the ServicePackage. The ServiceManifestName and ServiceManifestVersion 
       should match the Name and Version attributes of the ServiceManifest element defined in the 
       ServiceManifest.xml file. -->
    <ServiceManifestRef ServiceManifestName="VotingDataPkg" ServiceManifestVersion="1.0.0" />
    <ConfigOverrides />
    <ServiceManifestRef ServiceManifestName="VotingWebPkg" ServiceManifestVersion="1.0.0" />
    <ConfigOverrides />
    <!-- The section below creates instances of service types, when an instance of this 
         application type is created. You can also create one or more instances of service type using the 
         ServiceFabric PowerShell module.
         The attribute ServiceTypeName below must match the name defined in the imported ServiceManifest.xml file. -->
    <Service Name="VotingData">
      <StatefulService ServiceTypeName="VotingDataType" TargetReplicaSetSize="[VotingData_TargetReplicaSetSize]" MinReplicaSetSize="[VotingData_MinReplicaSetSize]">
        <UniformInt64Partition PartitionCount="[VotingData_PartitionCount]" LowKey="0" HighKey="25" />
    <Service Name="VotingWeb" ServicePackageActivationMode="ExclusiveProcess">
      <StatelessService ServiceTypeName="VotingWebType" InstanceCount="[VotingWeb_InstanceCount]">
        <SingletonPartition />

Like service manifests, Version attributes are unstructured strings and aren't parsed by the system. Version attributes are also used to version each component for upgrades.

Parameters defines the parameters used throughout the application manifest. The values of these parameters can be supplied when the application is instantiated and can override application or service configuration settings. The default parameter value is used if the value isn't changed during application instantiation. To learn how to maintain different application and service parameters for individual environments, see Managing application parameters for multiple environments.

ServiceManifestImport contains references to service manifests that compose this application type. An application manifest can contain multiple service manifest imports, and each can be versioned independently. Imported service manifests determine what service types are valid within this application type. Within the ServiceManifestImport, you override configuration values in Settings.xml and environment variables in ServiceManifest.xml files. Policies (not set in the preceding example) for end-point binding, security and access, and package sharing can be set on imported service manifests. For more information, see Configure security policies for your application.

DefaultServices declares service instances that are automatically created whenever an application is instantiated against this application type. Default services are just a convenience and behave like normal services in every respect after they have been created. They're upgraded along with any other services in the application instance and can be removed as well. An application manifest can contain multiple default services.


DefaultServices is deprecated in favor of StartupServices.xml. You can read about StartupServices.xml in Introducing StartupServices.xml in Service Fabric Application.

Certificates (not set in the preceding example) declares the certificates used to setup HTTPS endpoints or encrypt secrets in the application manifest.

Placement Constraints are the statements that define where services should run. These statements are attached to individual services that you select for one or more node properties. For more information, see Placement constraints and node property syntax.

Policies (not set in the preceding example) describes the log collection, default run-as, health, and security access policies to set at the application level, including whether the service(s) have access to the Service Fabric runtime.


A Service Fabric cluster is single tenant by design and hosted applications are considered trusted. If you are considering hosting untrusted applications, please see Hosting untrusted applications in a Service Fabric cluster.

Principals (not set in the preceding example) describe the security principals (users or groups) required to run services and secure service resources. Principals are referenced in the Policies sections.

Next steps