Microsoft.Network networkSecurityGroups/securityRules
Bicep resource definition
The networkSecurityGroups/securityRules resource type can be deployed to:
- Resource groups - See resource group deployment commands
For a list of changed properties in each API version, see change log.
Remarks
For guidance on creating network security groups, see Create virtual network resources by using Bicep.
Resource format
To create a Microsoft.Network/networkSecurityGroups/securityRules resource, add the following Bicep to your template.
resource symbolicname 'Microsoft.Network/networkSecurityGroups/securityRules@2022-07-01' = {
name: 'string'
parent: resourceSymbolicName
properties: {
access: 'string'
description: 'string'
destinationAddressPrefix: 'string'
destinationAddressPrefixes: [
'string'
]
destinationApplicationSecurityGroups: [
{
id: 'string'
location: 'string'
properties: {}
tags: {}
}
]
destinationPortRange: 'string'
destinationPortRanges: [
'string'
]
direction: 'string'
priority: int
protocol: 'string'
sourceAddressPrefix: 'string'
sourceAddressPrefixes: [
'string'
]
sourceApplicationSecurityGroups: [
{
id: 'string'
location: 'string'
properties: {}
tags: {}
}
]
sourcePortRange: 'string'
sourcePortRanges: [
'string'
]
}
}
Property values
networkSecurityGroups/securityRules
| Name | Description | Value |
|---|---|---|
| name | The resource name See how to set names and types for child resources in Bicep. |
string (required) Character limit: 1-80 Valid characters: Alphanumerics, underscores, periods, and hyphens. Start with alphanumeric. End alphanumeric or underscore. |
| parent | In Bicep, you can specify the parent resource for a child resource. You only need to add this property when the child resource is declared outside of the parent resource. For more information, see Child resource outside parent resource. |
Symbolic name for resource of type: networkSecurityGroups |
| properties | Properties of the security rule. | SecurityRulePropertiesFormat |
SecurityRulePropertiesFormat
| Name | Description | Value |
|---|---|---|
| access | The network traffic is allowed or denied. | 'Allow' 'Deny' (required) |
| description | A description for this rule. Restricted to 140 chars. | string |
| destinationAddressPrefix | The destination address prefix. CIDR or destination IP range. Asterisk '*' can also be used to match all source IPs. Default tags such as 'VirtualNetwork', 'AzureLoadBalancer' and 'Internet' can also be used. | string |
| destinationAddressPrefixes | The destination address prefixes. CIDR or destination IP ranges. | string[] |
| destinationApplicationSecurityGroups | The application security group specified as destination. | ApplicationSecurityGroup[] |
| destinationPortRange | The destination port or range. Integer or range between 0 and 65535. Asterisk '*' can also be used to match all ports. | string |
| destinationPortRanges | The destination port ranges. | string[] |
| direction | The direction of the rule. The direction specifies if rule will be evaluated on incoming or outgoing traffic. | 'Inbound' 'Outbound' (required) |
| priority | The priority of the rule. The value can be between 100 and 4096. The priority number must be unique for each rule in the collection. The lower the priority number, the higher the priority of the rule. | int |
| protocol | Network protocol this rule applies to. | '*' 'Ah' 'Esp' 'Icmp' 'Tcp' 'Udp' (required) |
| sourceAddressPrefix | The CIDR or source IP range. Asterisk '*' can also be used to match all source IPs. Default tags such as 'VirtualNetwork', 'AzureLoadBalancer' and 'Internet' can also be used. If this is an ingress rule, specifies where network traffic originates from. | string |
| sourceAddressPrefixes | The CIDR or source IP ranges. | string[] |
| sourceApplicationSecurityGroups | The application security group specified as source. | ApplicationSecurityGroup[] |
| sourcePortRange | The source port or range. Integer or range between 0 and 65535. Asterisk '*' can also be used to match all ports. | string |
| sourcePortRanges | The source port ranges. | string[] |
ApplicationSecurityGroup
| Name | Description | Value |
|---|---|---|
| id | Resource ID. | string |
| location | Resource location. | string |
| properties | Properties of the application security group. | ApplicationSecurityGroupPropertiesFormat |
| tags | Resource tags. | object |
ApplicationSecurityGroupPropertiesFormat
This object doesn't contain any properties to set during deployment. All properties are ReadOnly.
ARM template resource definition
The networkSecurityGroups/securityRules resource type can be deployed to:
- Resource groups - See resource group deployment commands
For a list of changed properties in each API version, see change log.
Remarks
For guidance on creating network security groups, see Create virtual network resources by using Bicep.
Resource format
To create a Microsoft.Network/networkSecurityGroups/securityRules resource, add the following JSON to your template.
{
"type": "Microsoft.Network/networkSecurityGroups/securityRules",
"apiVersion": "2022-07-01",
"name": "string",
"properties": {
"access": "string",
"description": "string",
"destinationAddressPrefix": "string",
"destinationAddressPrefixes": [ "string" ],
"destinationApplicationSecurityGroups": [
{
"id": "string",
"location": "string",
"properties": {},
"tags": {}
}
],
"destinationPortRange": "string",
"destinationPortRanges": [ "string" ],
"direction": "string",
"priority": "int",
"protocol": "string",
"sourceAddressPrefix": "string",
"sourceAddressPrefixes": [ "string" ],
"sourceApplicationSecurityGroups": [
{
"id": "string",
"location": "string",
"properties": {},
"tags": {}
}
],
"sourcePortRange": "string",
"sourcePortRanges": [ "string" ]
}
}
Property values
networkSecurityGroups/securityRules
| Name | Description | Value |
|---|---|---|
| type | The resource type | 'Microsoft.Network/networkSecurityGroups/securityRules' |
| apiVersion | The resource api version | '2022-07-01' |
| name | The resource name See how to set names and types for child resources in JSON ARM templates. |
string (required) Character limit: 1-80 Valid characters: Alphanumerics, underscores, periods, and hyphens. Start with alphanumeric. End alphanumeric or underscore. |
| properties | Properties of the security rule. | SecurityRulePropertiesFormat |
SecurityRulePropertiesFormat
| Name | Description | Value |
|---|---|---|
| access | The network traffic is allowed or denied. | 'Allow' 'Deny' (required) |
| description | A description for this rule. Restricted to 140 chars. | string |
| destinationAddressPrefix | The destination address prefix. CIDR or destination IP range. Asterisk '*' can also be used to match all source IPs. Default tags such as 'VirtualNetwork', 'AzureLoadBalancer' and 'Internet' can also be used. | string |
| destinationAddressPrefixes | The destination address prefixes. CIDR or destination IP ranges. | string[] |
| destinationApplicationSecurityGroups | The application security group specified as destination. | ApplicationSecurityGroup[] |
| destinationPortRange | The destination port or range. Integer or range between 0 and 65535. Asterisk '*' can also be used to match all ports. | string |
| destinationPortRanges | The destination port ranges. | string[] |
| direction | The direction of the rule. The direction specifies if rule will be evaluated on incoming or outgoing traffic. | 'Inbound' 'Outbound' (required) |
| priority | The priority of the rule. The value can be between 100 and 4096. The priority number must be unique for each rule in the collection. The lower the priority number, the higher the priority of the rule. | int |
| protocol | Network protocol this rule applies to. | '*' 'Ah' 'Esp' 'Icmp' 'Tcp' 'Udp' (required) |
| sourceAddressPrefix | The CIDR or source IP range. Asterisk '*' can also be used to match all source IPs. Default tags such as 'VirtualNetwork', 'AzureLoadBalancer' and 'Internet' can also be used. If this is an ingress rule, specifies where network traffic originates from. | string |
| sourceAddressPrefixes | The CIDR or source IP ranges. | string[] |
| sourceApplicationSecurityGroups | The application security group specified as source. | ApplicationSecurityGroup[] |
| sourcePortRange | The source port or range. Integer or range between 0 and 65535. Asterisk '*' can also be used to match all ports. | string |
| sourcePortRanges | The source port ranges. | string[] |
ApplicationSecurityGroup
| Name | Description | Value |
|---|---|---|
| id | Resource ID. | string |
| location | Resource location. | string |
| properties | Properties of the application security group. | ApplicationSecurityGroupPropertiesFormat |
| tags | Resource tags. | object |
ApplicationSecurityGroupPropertiesFormat
This object doesn't contain any properties to set during deployment. All properties are ReadOnly.
Terraform (AzAPI provider) resource definition
The networkSecurityGroups/securityRules resource type can be deployed to:
- Resource groups
For a list of changed properties in each API version, see change log.
Resource format
To create a Microsoft.Network/networkSecurityGroups/securityRules resource, add the following Terraform to your template.
resource "azapi_resource" "symbolicname" {
type = "Microsoft.Network/networkSecurityGroups/securityRules@2022-07-01"
name = "string"
parent_id = "string"
body = jsonencode({
properties = {
access = "string"
description = "string"
destinationAddressPrefix = "string"
destinationAddressPrefixes = [
"string"
]
destinationApplicationSecurityGroups = [
{
id = "string"
location = "string"
properties = {}
tags = {}
}
]
destinationPortRange = "string"
destinationPortRanges = [
"string"
]
direction = "string"
priority = int
protocol = "string"
sourceAddressPrefix = "string"
sourceAddressPrefixes = [
"string"
]
sourceApplicationSecurityGroups = [
{
id = "string"
location = "string"
properties = {}
tags = {}
}
]
sourcePortRange = "string"
sourcePortRanges = [
"string"
]
}
})
}
Property values
networkSecurityGroups/securityRules
| Name | Description | Value |
|---|---|---|
| type | The resource type | "Microsoft.Network/networkSecurityGroups/securityRules@2022-07-01" |
| name | The resource name | string (required) Character limit: 1-80 Valid characters: Alphanumerics, underscores, periods, and hyphens. Start with alphanumeric. End alphanumeric or underscore. |
| parent_id | The ID of the resource that is the parent for this resource. | ID for resource of type: networkSecurityGroups |
| properties | Properties of the security rule. | SecurityRulePropertiesFormat |
SecurityRulePropertiesFormat
| Name | Description | Value |
|---|---|---|
| access | The network traffic is allowed or denied. | "Allow" "Deny" (required) |
| description | A description for this rule. Restricted to 140 chars. | string |
| destinationAddressPrefix | The destination address prefix. CIDR or destination IP range. Asterisk '*' can also be used to match all source IPs. Default tags such as 'VirtualNetwork', 'AzureLoadBalancer' and 'Internet' can also be used. | string |
| destinationAddressPrefixes | The destination address prefixes. CIDR or destination IP ranges. | string[] |
| destinationApplicationSecurityGroups | The application security group specified as destination. | ApplicationSecurityGroup[] |
| destinationPortRange | The destination port or range. Integer or range between 0 and 65535. Asterisk '*' can also be used to match all ports. | string |
| destinationPortRanges | The destination port ranges. | string[] |
| direction | The direction of the rule. The direction specifies if rule will be evaluated on incoming or outgoing traffic. | "Inbound" "Outbound" (required) |
| priority | The priority of the rule. The value can be between 100 and 4096. The priority number must be unique for each rule in the collection. The lower the priority number, the higher the priority of the rule. | int |
| protocol | Network protocol this rule applies to. | "*" "Ah" "Esp" "Icmp" "Tcp" "Udp" (required) |
| sourceAddressPrefix | The CIDR or source IP range. Asterisk '*' can also be used to match all source IPs. Default tags such as 'VirtualNetwork', 'AzureLoadBalancer' and 'Internet' can also be used. If this is an ingress rule, specifies where network traffic originates from. | string |
| sourceAddressPrefixes | The CIDR or source IP ranges. | string[] |
| sourceApplicationSecurityGroups | The application security group specified as source. | ApplicationSecurityGroup[] |
| sourcePortRange | The source port or range. Integer or range between 0 and 65535. Asterisk '*' can also be used to match all ports. | string |
| sourcePortRanges | The source port ranges. | string[] |
ApplicationSecurityGroup
| Name | Description | Value |
|---|---|---|
| id | Resource ID. | string |
| location | Resource location. | string |
| properties | Properties of the application security group. | ApplicationSecurityGroupPropertiesFormat |
| tags | Resource tags. | object |
ApplicationSecurityGroupPropertiesFormat
This object doesn't contain any properties to set during deployment. All properties are ReadOnly.