Create an autoscale scaling plan for Azure Virtual Desktop

Important

Autoscale for personal host pools is currently in PREVIEW. See the Supplemental Terms of Use for Microsoft Azure Previews for legal terms that apply to Azure features that are in beta, preview, or otherwise not yet released into general availability.

Autoscale lets you scale your session host virtual machines (VMs) in a host pool up or down according to schedule to optimize deployment costs.

To learn more about autoscale, see Autoscale scaling plans and example scenarios in Azure Virtual Desktop.

Note

• Azure Virtual Desktop (classic) doesn't support autoscale.
• Autoscale doesn't support Azure Virtual Desktop for Azure Stack HCI.
• Autoscale doesn't support scaling of ephemeral disks.
• Autoscale doesn't support scaling of generalized or sysprepped VMs with machine-specific information removed. For more information, see Remove machine-specific information by generalizing a VM before creating an image.
• You can't use autoscale and scale session hosts using Azure Automation and Azure Logic Apps on the same host pool. You must use one or the other.
• Autoscale is available in Azure and Azure Government.
• You can currently only configure personal autoscale with the Azure portal.

For best results, we recommend using autoscale with VMs you deployed with Azure Virtual Desktop Azure Resource Manager templates or first-party tools from Microsoft.

Important

Deploying scaling plans with autoscale in Azure is currently limited to the following regions:

• Australia East
• Canada Central
• Canada East
• Central India
• Central US
• East US
• East US 2
• Japan East
• North Central US
• North Europe
• South Central US
• UK South
• UK West
• West Central US
• West Europe
• West US
• West US 2
• West US 3

Prerequisites

To use scaling plans, make sure you follow these guidelines:

• You must create the scaling plan in the same Azure region as the host pool you assign it to. You can't assign a scaling plan in one Azure region to a host pool in another Azure region.
• When using autoscale for pooled host pools, you must have a configured MaxSessionLimit parameter for that host pool. Don't use the default value. You can configure this value in the host pool settings in the Azure portal or run the New-AzWvdHostPool or Update-AzWvdHostPool PowerShell cmdlets.
• You must grant Azure Virtual Desktop access to manage the power state of your session host VMs. You must have the Microsoft.Authorization/roleAssignments/write permission on your subscriptions in order to assign the role-based access control (RBAC) role for the Azure Virtual Desktop service principal on those subscriptions. This is part of User Access Administrator and Owner built in roles.

Assign the Desktop Virtualization Power On Off Contributor role with the Azure portal

Before creating your first scaling plan, you'll need to assign the Desktop Virtualization Power On Off Contributor RBAC role to the Azure Virtual Desktop service principal with your Azure subscription as the assignable scope. Assigning this role at any level lower than your subscription, such as the resource group, host pool, or VM, will prevent autoscale from working properly. You'll need to add each Azure subscription as an assignable scope that contains host pools and session host VMs you want to use with autoscale. This role and assignment will allow Azure Virtual Desktop to manage the power state of any VMs in those subscriptions. It will also let the service apply actions on both host pools and VMs when there are no active user sessions.

To learn how to assign the Desktop Virtualization Power On Off Contributor role to the Azure Virtual Desktop service principal, see Assign RBAC roles to the Azure Virtual Desktop service principal.

Create a scaling plan

Now that you've assigned the Desktop Virtualization Power On Off Contributor role to the service principal on your subscriptions, you can create a scaling plan. To create a scaling plan:

1. Sign in to the Azure portal.

2. In the search bar, type Azure Virtual Desktop and select the matching service entry.

3. Select Scaling Plans, then select Create.

4. In the Basics tab, look under Project details and select the name of the subscription you'll assign the scaling plan to.

5. If you want to make a new resource group, select Create new. If you want to use an existing resource group, select its name from the drop-down menu.

6. Enter a name for the scaling plan into the Name field.

7. Optionally, you can also add a "friendly" name that will be displayed to your users and a description for your plan.

8. For Region, select a region for your scaling plan. The metadata for the object will be stored in the geography associated with the region. To learn more about regions, see Data locations.

9. For Time zone, select the time zone you'll use with your plan.

10. For Host pool type, select the type of host pool that you want your scaling plan to apply to.

11. In Exclusion tags, enter a tag name for VMs you don't want to include in scaling operations. For example, you might want to tag VMs that are set to drain mode so that autoscale doesn't override drain mode during maintenance using the exclusion tag "excludeFromScaling". If you've set "excludeFromScaling" as the tag name field on any of the VMs in the host pool, autoscale won't start, stop, or change the drain mode of those particular VMs.

    Note

    • Though an exclusion tag will exclude the tagged VM from power management scaling operations, tagged VMs will still be considered as part of the calculation of the minimum percentage of hosts.
    • Make sure not to include any sensitive information in the exclusion tags such as user principal names or other personally identifiable information.

12. Select Next, which should take you to the Schedules tab.

Configure a schedule

Schedules let you define when autoscale turns VMs on and off throughout the day. The schedule parameters are different based on the Host pool type you chose for the scaling plan.

Pooled host pools

In each phase of the schedule, autoscale only turns off VMs when in doing so the used host pool capacity won't exceed the capacity threshold. The default values you'll see when you try to create a schedule are the suggested values for weekdays, but you can change them as needed.

To create or change a schedule:

1. In the Schedules tab, select Add schedule.

2. Enter a name for your schedule into the Schedule name field.

3. In the Repeat on field, select which days your schedule will repeat on.

4. In the Ramp up tab, fill out the following fields:

   • For Start time, select a time from the drop-down menu to start preparing VMs for peak business hours.

   • For Load balancing algorithm, we recommend selecting breadth-first algorithm. Breadth-first load balancing will distribute users across existing VMs to keep access times fast.

     Note

     The load balancing preference you select here will override the one you selected for your original host pool settings.

   • For Minimum percentage of hosts, enter the percentage of session hosts you want to always remain on in this phase. If the percentage you enter isn't a whole number, it's rounded up to the nearest whole number. For example, in a host pool of seven session hosts, if you set the minimum percentage of hosts during ramp-up hours to 10%, one VM will always stay on during ramp-up hours, and it won't be turned off by autoscale.

   • For Capacity threshold, enter the percentage of available host pool capacity that will trigger a scaling action to take place. For example, if two session hosts in the host pool with a max session limit of 20 are turned on, the available host pool capacity is 40. If you set the capacity threshold to 75% and the session hosts have more than 30 user sessions, autoscale will turn on a third session host. This will then change the available host pool capacity from 40 to 60.

5. In the Peak hours tab, fill out the following fields:

   • For Start time, enter a start time for when your usage rate is highest during the day. Make sure the time is in the same time zone you specified for your scaling plan. This time is also the end time for the ramp-up phase.

   • For Load balancing, you can select either breadth-first or depth-first load balancing. Breadth-first load balancing distributes new user sessions across all available session hosts in the host pool. Depth-first load balancing distributes new sessions to any available session host with the highest number of connections that hasn't reached its session limit yet. For more information about load-balancing types, see Configure the Azure Virtual Desktop load-balancing method.

   Note

   You can't change the capacity threshold here. Instead, the setting you entered in Ramp-up will carry over to this setting.

   • For Ramp-down, you'll enter values into similar fields to Ramp-up, but this time it will be for when your host pool usage drops off. This will include the following fields:

     • Start time
     • Load-balancing algorithm
     • Minimum percentage of hosts (%)
     • Capacity threshold (%)
     • Force logoff users

   Important

   • If you've enabled autoscale to force users to sign out during ramp-down, the feature will choose the session host with the lowest number of user sessions to shut down. Autoscale will put the session host in drain mode, send all active user sessions a notification telling them they'll be signed out, and then sign out all users after the specified wait time is over. After autoscale signs out all user sessions, it then deallocates the VM. If you haven't enabled forced sign out during ramp-down, session hosts with no active or disconnected sessions will be deallocated.
   • During ramp-down, autoscale will only shut down VMs if all existing user sessions in the host pool can be consolidated to fewer VMs without exceeding the capacity threshold.

   • Likewise, Off-peak hours works the same way as Peak hours:

     • Start time, which is also the end of the ramp-down period.
     • Load-balancing algorithm. We recommend choosing depth-first to gradually reduce the number of session hosts based on sessions on each VM.
     • Just like peak hours, you can't configure the capacity threshold here. Instead, the value you entered in Ramp-down will carry over.

Personal host pools

In each phase of the schedule, define whether VMs should be deallocated based on the user session state.

To create or change a schedule:

1. In the Schedules tab, select Add schedule.

2. Enter a name for your schedule into the Schedule name field.

3. In the Repeat on field, select which days your schedule will repeat on.

4. In the Ramp up tab, fill out the following fields:

   • For Start time, select the time you want the ramp-up phase to start from the drop-down menu.

   • For Start VM on Connect, select whether you want Start VM on Connect to be enabled during ramp up.

   • For VMs to start, select whether you want only personal desktops that have a user assigned to them at the start time to be started, you want all personal desktops in the host pool (regardless of user assignment) to be started, or you want no personal desktops in the pool to be started.

   Note

   We highly recommend that you enable Start VM on Connect if you choose not to start your VMs during the ramp-up phase.

   • For When disconnected for, specify the number of minutes a user session has to be disconnected before performing a specific action. This number can be anywhere between 0 and 360.

   • For Perform, specify what action the service should take after a user session has been disconnected for the specified time. The options are to either deallocate (shut down) the VMs or do nothing.

   • For When logged off for, specify the number of minutes a user session has to be logged off before performing a specific action. This number can be anywhere between 0 and 360.

   • For Perform, specify what action the service should take after a user session has been logged off for the specified time. The options are to either deallocate (shut down) the VMs or do nothing.

5. In the Peak hours, Ramp-down, and Off-peak hours tabs, fill out the following fields:

   • For Start time, enter a start time for each phase. This time is also the end time for the previous phase.

   • For Start VM on Connect, select whether you want to enable Start VM on Connect to be enabled during that phase.

   • For When disconnected for, specify the number of minutes a user session has to be disconnected before performing a specific action. This number can be anywhere between 0 and 360.

   • For Perform, specify what action should be performed after a user session has been disconnected for the specified time. The options are to either deallocate (shut down) the VMs or do nothing.

   • For When logged off for, specify the number of minutes a user session has to be logged off before performing a specific action. This number can be anywhere between 0 and 360.

   • For Perform, specify what action should be performed after a user session has been logged off for the specified time. The options are to either deallocate (shut down) the VMs or do nothing.

Assign host pools

Now that you've set up your scaling plan, it's time to assign the plan to your host pools. Select the check box next to each host pool you want to include. If you don't want to enable autoscale, unselect all check boxes. You can always return to this setting later and change it. You can only assign the scaling plan to host pools that match the host pool type specified in the plan.

Note

• When you create or update a scaling plan that's already assigned to host pools, its changes will be applied immediately.

• While autoscale for personal host pools is in preview, we don't recommend assigning a scaling plan to a personal host pool with more than 2000 session hosts.

Add tags

After that, you'll need to enter tags. Tags are name and value pairs that categorize resources for consolidated billing. You can apply the same tag to multiple resources and resource groups. To learn more about tagging resources, see Use tags to organize your Azure resources.

Note

If you change resource settings on other tabs after creating tags, your tags will be automatically updated.

Once you're done, go to the Review + create tab and select Create to deploy your host pool.

Edit an existing scaling plan

To edit an existing scaling plan:

1. Sign in to the Azure portal.

2. In the search bar, type Azure Virtual Desktop and select the matching service entry.

3. Select Scaling plans, then select the name of the scaling plan you want to edit. The overview blade of the scaling plan should open.

4. To change the scaling plan host pool assignments, under the Manage heading select Host pool assignments.

5. To edit schedules, under the Manage heading, select Schedules.

6. To edit the plan's friendly name, description, time zone, or exclusion tags, go to the Properties tab.

Next steps

Now that you've created your scaling plan, here are some things you can do:

• Assign your scaling plan to new and existing host pools
• Enable diagnostics for your scaling plan

If you'd like to learn more about terms used in this article, check out our autoscale glossary. For examples of how autoscale works, see Autoscale example scenarios. You can also look at our Autoscale FAQ if you have other questions.