Configure VPN gateway transit for virtual network peering
This article helps you configure gateway transit for virtual network peering. Virtual network peering seamlessly connects two Azure virtual networks, merging the two virtual networks into one for connectivity purposes. Gateway transit is a peering property that lets one virtual network use the VPN gateway in the peered virtual network for cross-premises or VNet-to-VNet connectivity. The following diagram shows how gateway transit works with virtual network peering.
In the diagram, gateway transit allows the peered virtual networks to use the Azure VPN gateway in Hub-RM. Connectivity available on the VPN gateway, including S2S, P2S, and VNet-to-VNet connections, applies to all three virtual networks. The transit option is available for peering between the same, or different deployment models. If you're configuring transit between different deployment models, the hub virtual network and virtual network gateway must be in the Resource Manager deployment model, not the classic deployment model.
In hub-and-spoke network architecture, gateway transit allows spoke virtual networks to share the VPN gateway in the hub, instead of deploying VPN gateways in every spoke virtual network. Routes to the gateway-connected virtual networks or on-premises networks will propagate to the routing tables for the peered virtual networks using gateway transit. You can disable the automatic route propagation from the VPN gateway. Create a routing table with the "Disable BGP route propagation" option, and associate the routing table to the subnets to prevent the route distribution to those subnets. For more information, see Virtual network routing table.
There are two scenarios in this article:
- Same deployment model: Both virtual networks are created in the Resource Manager deployment model.
- Different deployment models: The spoke virtual network is created in the classic deployment model, and the hub virtual network and gateway are in the Resource Manager deployment model.
If you make a change to the topology of your network and have Windows VPN clients, the VPN client package for Windows clients must be downloaded and installed again in order for the changes to be applied to the client.
Before you begin, verify that you have the following virtual networks and permissions:
|VNet||Deployment model||Virtual network gateway|
The accounts you use to create a virtual network peering must have the necessary roles or permissions. In the example below, if you were peering the two virtual networks named Hub-RM and Spoke-Classic, your account must have the following roles or permissions for each virtual network:
|Hub-RM||Resource Manager||Network Contributor||Microsoft.Network/virtualNetworks/virtualNetworkPeerings/write|
|Classic||Classic Network Contributor||N/A|
|Spoke-Classic||Resource Manager||Network Contributor||Microsoft.Network/virtualNetworks/peer|
|Classic||Classic Network Contributor||Microsoft.ClassicNetwork/virtualNetworks/peer|
Same deployment model
In this scenario, the virtual networks are both in the Resource Manager deployment model. Use the following steps to create or update the virtual network peerings to enable gateway transit.
To add a peering and enable transit
In the Azure portal, create or update the virtual network peering from the Hub-RM. Navigate to the Hub-RM virtual network. Select Peerings, then + Add to open Add peering.
On the Add peering page, configure the values for This virtual network.
On the same page, continue on to configure the values for the Remote virtual network.
Select Add to create the peering.
Verify the peering status as Connected on both virtual networks.
To modify an existing peering for transit
If the peering was already created, you can modify the peering for transit.
Navigate to the virtual network. Select Peerings and select the peering that you want to modify.
Update the VNet peering.
Save the peering settings.
You can also use PowerShell to create or update the peering with the example above. Replace the variables with the names of your virtual networks and resource groups.
$SpokeRG = "SpokeRG1" $SpokeRM = "Spoke-RM" $HubRG = "HubRG1" $HubRM = "Hub-RM" $spokermvnet = Get-AzVirtualNetwork -Name $SpokeRM -ResourceGroup $SpokeRG $hubrmvnet = Get-AzVirtualNetwork -Name $HubRM -ResourceGroup $HubRG Add-AzVirtualNetworkPeering ` -Name SpokeRMtoHubRM ` -VirtualNetwork $spokermvnet ` -RemoteVirtualNetworkId $hubrmvnet.Id ` -UseRemoteGateways Add-AzVirtualNetworkPeering ` -Name HubRMToSpokeRM ` -VirtualNetwork $hubrmvnet ` -RemoteVirtualNetworkId $spokermvnet.Id ` -AllowGatewayTransit
Different deployment models
In this configuration, the spoke VNet Spoke-Classic is in the classic deployment model and the hub VNet Hub-RM is in the Resource Manager deployment model. When configuring transit between deployment models, the virtual network gateway must be configured for the Resource Manager VNet, not the classic VNet.
For this configuration, you only need to configure the Hub-RM virtual network. You don't need to configure anything on the Spoke-Classic VNet.
In the Azure portal, navigate to the Hub-RM virtual network, select Peerings, then select + Add.
On the Add peering page, configure the following values:
Verify the subscription is correct, then select the virtual network from the dropdown.
Select Add to add the peering.
Verify the peering status as Connected on the Hub-RM virtual network.
For this configuration, you don't need to configure anything on the Spoke-Classic virtual network. Once the status shows Connected, the spoke virtual network can use the connectivity through the VPN gateway in the hub virtual network.
You can also use PowerShell to create or update the peering with the example above. Replace the variables and subscription ID with the values of your virtual network and resource groups, and subscription. You only need to create virtual network peering on the hub virtual network.
$HubRG = "HubRG1" $HubRM = "Hub-RM" $hubrmvnet = Get-AzVirtualNetwork -Name $HubRM -ResourceGroup $HubRG Add-AzVirtualNetworkPeering ` -Name HubRMToClassic ` -VirtualNetwork $hubrmvnet ` -RemoteVirtualNetworkId "/subscriptions/<subscription Id>/resourceGroups/Default-Networking/providers/Microsoft.ClassicNetwork/virtualNetworks/Spoke-Classic" ` -AllowGatewayTransit
- Learn more about virtual network peering constraints and behaviors and virtual network peering settings before creating a virtual network peering for production use.
- Learn how to create a hub and spoke network topology with virtual network peering and gateway transit.
- Create virtual network peering with the same deployment model.
- Create virtual network peering with different deployment models.
Submit and view feedback for