Mcp23x0x Class

Definition

Namespace:

Iot.Device.Mcp23xxx

Assembly:

Iot.Device.Bindings.dll

Package:

Iot.Device.Bindings v3.0.0

Wraps 8-bit MCP I/O expanders.

public abstract class Mcp23x0x : Iot.Device.Mcp23xxx.Mcp23xxx

type Mcp23x0x = class
    inherit Mcp23xxx

Public MustInherit Class Mcp23x0x
Inherits Mcp23xxx

Inheritance

Object

GpioDriver

Mcp23xxx

Mcp23x0x

Derived

Iot.Device.Mcp23xxx.Mcp23008

Iot.Device.Mcp23xxx.Mcp23009

Iot.Device.Mcp23xxx.Mcp23s08

Iot.Device.Mcp23xxx.Mcp23s09

Constructors

Mcp23x0x(Mcp23xxx+BusAdapter, Int32, Int32, GpioController, Boolean)

Constructs Mcp23x0x instance

Fields

_bus	Bus adapter (I2C/SPI) used to communicate with the device (Inherited from Mcp23xxx)

Properties

PinCount

The number of pins provided by the driver.

Methods

AddCallbackForPinValueChangedEvent(Int32, PinEventTypes, PinChangeEventHandler)	Adds a handler for a pin value changed event. (Inherited from Mcp23xxx)
ClosePin(Int32)	Closes an open pin. (Inherited from Mcp23xxx)
ConvertPinNumberToLogicalNumberingScheme(Int32)	Converts a board pin number to the driver's logical numbering scheme. (Inherited from Mcp23xxx)
Disable()	Disables the device by setting the reset pin low. (Inherited from Mcp23xxx)
Dispose()	Disposes this instance, closing all open pins (Inherited from GpioDriver)
Dispose(Boolean)	Disposes this instance (Inherited from Mcp23xxx)
Enable()	Enables the device by setting the reset pin high. (Inherited from Mcp23xxx)
GetPinMode(Int32)	Gets the mode of a pin. (Inherited from Mcp23xxx)
InternalRead(Register, Span<Byte>, Port)	Reads a number of bytes from registers. (Inherited from Mcp23xxx)
InternalReadByte(Register, Port)	Reads byte from the device register (Inherited from Mcp23xxx)
InternalReadInterrupt(Port)	Reads interrupt value (Inherited from Mcp23xxx)
InternalReadUInt16(Register)	Read 16-bit unsigned integer from the device register (Inherited from Mcp23xxx)
InternalWrite(Register, Span<Byte>, Port)	Writes a number of bytes to registers. (Inherited from Mcp23xxx)
InternalWriteByte(Register, Byte, Port)	Write byte to device register (Inherited from Mcp23xxx)
InternalWriteUInt16(Register, UInt16)	Writes 16-bit unsigned integer to the device register (Inherited from Mcp23xxx)
IsPinModeSupported(Int32, PinMode)	Checks if a pin supports a specific mode. (Inherited from Mcp23xxx)
OpenPin(Int32)	Opens a pin in order for it to be ready to use. The driver attempts to open the pin without changing its mode or value. (Inherited from Mcp23xxx)
QueryComponentInformation()	Query information about a component and its children. (Inherited from GpioDriver)
Read(Int32)	Reads the value of a pin. (Inherited from Mcp23xxx)
Read(Span<PinValuePair>)	Reads the value of a set of pins (Inherited from Mcp23xxx)
ReadByte(Register)	Read a byte from the given register. (Inherited from Mcp23xxx)
ReadInterrupt()	Returns the value of the interrupt pin if configured. (Inherited from Mcp23xxx)
RemoveCallbackForPinValueChangedEvent(Int32, PinChangeEventHandler)	Removes a handler for a pin value changed event. (Inherited from Mcp23xxx)
SetPinMode(Int32, PinMode, PinValue)	Sets the mode to a pin and sets an initial value for an output pin. (Inherited from GpioDriver)
SetPinMode(Int32, PinMode)	Sets a mode to a pin. (Inherited from Mcp23xxx)
Toggle(Int32)	Toggle the current value of a pin. (Inherited from Mcp23xxx)
WaitForEvent(Int32, PinEventTypes, CancellationToken)	Blocks execution until an event of type eventType is received or a cancellation is requested. (Inherited from Mcp23xxx)
WaitForEventAsync(Int32, PinEventTypes, CancellationToken)	Async call until an event of type eventType is received or a cancellation is requested. (Inherited from GpioDriver)
Write(Int32, PinValue)	Writes a value to a pin. (Inherited from Mcp23xxx)
Write(ReadOnlySpan<PinValuePair>)	Writes values to a set of pins (Inherited from Mcp23xxx)
WriteByte(Register, Byte)	Write a byte to the given register. (Inherited from Mcp23xxx)